Valterra 2201X PVC Unibody Gate Valve, Silver, 2 Slip w/Gate Keeper

Brand:Valterra

3.6/5

55.29

Διαμόρφωση ενός τεμαχίου PCV UniBody. Οι άξονες από ανοξείδωτο χάλυβα αποτρέπουν τη σκουριά ή τη διάβρωση. Η λαβή κλειδώματος παρέχει θετικό κλείσιμο και εύκολο άνοιγμα της πόρτας. Η μέγιστη συνιστώμενη πίεση εργασίας είναι 50 psi. Παγίδες τσιμέντου διαλύτη για αποφυγή υπερβολικής κόλλησης.

Δεν υπάρχουν διαθέσιμες μονάδες
Κόκκινο φινίρισμα ψημένο σε σκόνη πάνω από κατασκευή από γαλβανισμένο χάλυβα χωρίς μόλυβδο. Πατενταρισμένη λαβή άνεσης Απασφάλιση σκανδάλης με καπάκι που κλείνει με ελατήριο και σταθερή λαβή. Διαθέτει οθόνη απαγωγέα φλόγας. 100% ελεγμένο διαρροή, UL και ULC στη λίστα και εγκεκριμένο FM. Δοχείο ασφαλείας 2 γαλονιών βενζίνης με πολυκίτρινο χωνί. Εγκεκριμένο FM. συμμορφώνεται με το Πρότυπο OSHA 1910.106 για την ασφαλή αποθήκευση και χειρισμό εύφλεκτων υγρών. Το καπάκι του στομίου κλείνει μόνο του για να αποτρέψει διαρροές ή διαρροές. Το συγκρότημα καπακιού ανοίγει αυτόματα για να εξαερώσει τους εσωτερικούς ατμούς. Ο απαγωγέας φλόγας αποτρέπει την ανάφλεξη των υγρών μέσα στο δοχείο και εμποδίζει την εξάπλωση της φλόγας. Κατασκευασμένο από γαλβανισμένο χάλυβα, το οποίο είναι ανθεκτικό στη σκουριά, τα βαθουλώματα και ορισμένα χημικά. Το φινίρισμα με βαφή πούδρας αντιστέκεται σε γρατσουνιές, θρυμματισμό, ξεθώριασμα και άλλες φθορές. Η ασφάλεια τύπου Ι μπορεί να χρησιμοποιηθεί για την ασφαλή αποθήκευση, μεταφορά και διανομή εύφλεκτων υγρών. συνοδεύεται από χωνί για να διευκολύνει το γέμισμα και το χύσιμο.
Brand Valterra
Country of Origin Mexico
Domestic Shipping Currently, item can be shipped only within the U.S. and to APO/FPO addresses. For APO/FPO shipments, please check with the manufacturer regarding warranty and support issues.
Exterior Finish Stainless Steel
Inlet Connection Type Solvent
International Shipping This item can be shipped to select countries outside of the U.S.
Is Discontinued By Manufacturer No
Item Dimensions LxWxH 7.5 x 4.05 x 3.2 inches
Item model number 2201X
Manufacturer Valterra Products
Material PVC
Product Dimensions 7.5 x 4.05 x 3.2 inches; 0.01 Ounces

3.6

8 Review
5 Star
75
4 Star
14
3 Star
6
2 Star
2
1 Star
3

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: kthompso
Reasonable value
After 18 years, this slider valve in our spa started leaking. Since it's designed to be glued into the PVC pipe, I had to engineer new pipe, unions, and elbows to make it fit, and remove the old plumbing with a saw. The project was easier than I anticipated, a way less expensive than if I had hired a spa technician. If you're a bit of a DIY person, this is definitely a project you can tackle without worrying much about leaks. I watched some Youtube videos (ie. "how to replace PVC plumbing in a spa"), and they gave me the confidence I needed to do the job myself.
Scritto da: N. Thomas
Good Construction
I liked the make of the product seemed very robust. I had to return because it wasn’t the right layout for my project. It was too bad because I liked the look of the valve.
Scritto da: Jon
Dropped and broke
I did state that I dropped it. I was in the hardware store looking for fittings and whilst in Home Depot I dropped the shut off and it broke into 2 pieces and leaked whatever oil was inside it on the shut off. Had I not felt oil I wouldn't have know it was broken. Point being, the ball valve shut off's that are in the hardware store are MUCH stronger than this shut off and the length between connections was the exact same. Only a couple bucks more but buy the hardware store shut off. Works exactly the same, fits exactly the same, and you could throw it against a brick wall and not have an issue.
Scritto da: T. Lux
These do their job
These are decent for the price I would opt to get heavier duty ones from a Spa or pool supply place doesn’t work for now
Scritto da: David B.
Works great
I have used this company's products many times and they work great
Scritto da: Bob Loritz
On/partial flo/off easily
Much easier to operate than the pvc ball valves.
Scritto da: Amazon Customer
I actually returned this item
I simply found a valve that worked better for my application. This one looked solid & a good value for your money, if this valve is what you need.
Scritto da: B&AK
Exactly what I need. 9 used so far in an indoor irrigation system.
Glues like any pvc fitting. Tight, thick pvc and it looks good too!!!

Σχετικά προϊόντα

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array