Tsumura 375ZR2 Standard Guide Bar με 0,325 Pitch, 0,058 Gauge και 72 Drive Link Chain, 18 Length Standard 18 Bar ,058 x ,325 in.

Brand:Tsumura

3.6/5

142.21

Αυτή είναι μια νέα ράβδος οδηγών TsuMura 18 Professional Guide Bar που είναι 0,325 pitch, 0,058 gauge και χρησιμοποιεί αλυσίδα 72 drive link, αυτή η μπάρα λειτουργεί εξαιρετικά σε Jonsered, Husqvarna και σε άλλες μάρκες. Αυτό το μπαρ λειτουργεί σε μοντέλα Husqvarna 45, 50, 55, 133SG, 136, 137, 140, 141, 142, 154, 234, 240, 242, 243, 246, 254, 340SE, 345, 350, 346, 350, 353, 455 συν πολλά άλλα, λειτουργεί επίσης σε μοντέλα Jonsered 49SP, 50, 51, 510SP, 520, 525, 535, 2045, 2050, 2141, 2145, 2150, 2152, 2245 plus models 2. Ταιριάζει: Μοντέλα DOLMAR: 112, 113, 114, 116, 116si, 117, 118, 119, 120, 120 Super, 120si, PS-510, PS-540, PS-5100S, PSH-5105, PSH-5105 6100, PS-6100H, PS-6800i αλλά για να λειτουργήσει αυτή η μπάρα σε αυτά τα μοντέλα το πριόνι σας πρέπει να είναι εξοπλισμένο με γρανάζι 0,325 pitch! Αντικαθιστά τη ράβδο οδηγών του Όρεγκον με αριθμό 188RNBK095 Οι ράβδοι οδηγοί TsuMura έχουν τη φήμη των κορυφαίων οδηγών ράβδων που κατασκευάζονται σήμερα! Πουλήθηκαν για 40 χρόνια με το όνομα TOTAL SUPER bar. Κατασκευασμένο από την καλύτερης ποιότητας χάλυβα εργαλείων υψηλής περιεκτικότητας σε άνθρακα. Το Sprocket Tips διαθέτει γρανάζια μεγάλης διαμέτρου που περικλείονται από θερμικά επεξεργασμένο ανθρακούχο χάλυβα. Συμπαγής μονοκόμματη ράβδος από αλεσμένο χάλυβα υψηλής περιεκτικότητας σε άνθρακα που έχει φινίρισμα από βουρτσισμένο χάλυβα. Οι ράγες είναι λειασμένες με ακρίβεια έως ομοιόμορφη ανοχή. Το μεγαλύτερο άκρο μειώνει το σφυρηλάτηση της αλυσίδας στις ράγες της ράβδου για μεγαλύτερη διάρκεια ζωής της ράβδου. Η άκρη TsuMura Pro ZR έχει σχεδιαστεί για να παρέχει μεγάλη διάρκεια ζωής, με χοντρό γρανάζι και ισχυρά γρανάζια που αντέχουν στη σκληρή χρήση και στις ακραίες θερμοκρασίες. Το άκρο του γραναζιού συγκρατείται σταθερά από τρία πριτσίνια και είναι εσοχή στο σώμα της ράβδου για εξαιρετική σταθερότητα και ακριβή τροφοδοσία της αλυσίδας.

Βάρος συσκευασίας: 5,0 κιλά. Το άκρο του γραναζιού συγκρατείται σταθερά από τρία πριτσίνια και είναι εσοχή στο σώμα της ράβδου για εξαιρετική σταθερότητα και ακριβή τροφοδοσία της αλυσίδας. Το Sprocket Tips διαθέτει γρανάζια μεγάλης διαμέτρου που περικλείονται από θερμικά επεξεργασμένο ανθρακούχο χάλυβα. Συμπαγής μονοκόμματη ράβδος από αλεσμένο χάλυβα υψηλής περιεκτικότητας σε άνθρακα που έχει φινίρισμα από βουρτσισμένο χάλυβα. Οι ράγες είναι λειασμένες με ακρίβεια έως ομοιόμορφη ανοχή. Το μεγαλύτερο άκρο μειώνει το σφυρηλάτηση της αλυσίδας στις ράγες της ράβδου για μεγαλύτερη διάρκεια ζωής της ράβδου. Η άκρη TsuMura Pro ZR έχει σχεδιαστεί για να παρέχει μεγάλη διάρκεια ζωής, με χοντρό γρανάζι και ισχυρά γρανάζια που αντέχουν στη σκληρή χρήση και στις ακραίες θερμοκρασίες. Αυτή είναι μια νέα ράβδος οδηγών TsuMura 18 Professional Guide Bar που είναι 0,325 pitch, 0,058 gauge και χρησιμοποιεί αλυσίδα 72 drive link, αυτή η μπάρα λειτουργεί εξαιρετικά σε Jonsered, Husqvarna και σε άλλες μάρκες. Αυτό το μπαρ λειτουργεί σε μοντέλα Husqvarna 45, 50, 55, 133SG, 136, 137, 140, 141, 142, 154, 234, 240, 242, 243, 246, 254, 340SE, 345, 350, 346, 350, 353, 455 συν πολλά άλλα, λειτουργεί επίσης σε μοντέλα Jonsered 49SP, 50, 51, 510SP, 520, 525, 535, 2045, 2050, 2141, 2145, 2150, 2152, 2245 plus models 2. Ταιριάζει: Μοντέλα DOLMAR: 112, 113, 114, 116, 116si, 117, 118, 119, 120, 120 Super, 120si, PS-510, PS-540, PS-5100S, PSH-5105, PSH-5105 6100, PS-6100H, PS-6800i αλλά για να λειτουργήσει αυτή η μπάρα σε αυτά τα μοντέλα το πριόνι σας πρέπει να είναι εξοπλισμένο με γρανάζι 0,325 pitch! Αντικαθιστά τη ράβδο οδηγών του Όρεγκον με αριθμό 188RNBK095 Οι ράβδοι οδηγοί TsuMura έχουν τη φήμη των κορυφαίων οδηγών ράβδων που κατασκευάζονται σήμερα! Πουλήθηκαν για 40 χρόνια με το όνομα TOTAL SUPER bar. Κατασκευασμένο από την καλύτερης ποιότητας χάλυβα εργαλείων υψηλής περιεκτικότητας σε άνθρακα.
Country of Origin Japan
Is Discontinued By Manufacturer No
Item model number 375ZR2
Manufacturer Tsumura
Package Dimensions 22.4 x 3.5 x 0.3 inches; 5 Pounds

3.6

8 Review
5 Star
81
4 Star
11
3 Star
0
2 Star
0
1 Star
8

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: james baker
24" .325 .058 bar.
So far so good! I have this on my 550xp mark ii, it's makes huge difference verse the 20" stock bar that came with the saw. I had it 5 or 6 months now. Haven't had any problems with it. I am a full time arborist, the saw is used 5-6 day a week. The bar has held up to all the task I've put it up against. Having a smaller but powerful saw up a spar like the 550xp is nice. It's a great deal better with the 24" bar. Also the bar is wider than husqvarnas, which makes lining up your face cuts a lot easier. I heard the tips had problems and failed quote frequently but that isn't the case that I have seen. I would say that most of the issues I have heard about, would have to do with user errors.
Scritto da: Oak Valley
Great Product
Buy this bar once and you’ll never need another one. High quality product!
Scritto da: Mabonleon
Superb bar!
Top quality bar, tight tolerances, and lighter than a regular bar of equal size. Not cheap, but you get what you pay for.
Scritto da: James W GeFellers
Great bar...horrible nose sprocket
I did a great deal of research prior to buying two of these bars for my saws I use in my business. I was confident with all the raving reviews that they would be a great fit for our needs. However, I've been sorely disappointed. The bar itself appears to be built very sturdily with high-quality materials, and I cannot say a bad thing about the bar. We hadn't used the first bar for more than 10 hours when it tore up. I was limbing the lower limbs on an eastern red cedar to gain access to the base of the tree to cut it down. As I bumped a small limb, the saw SLIGHTLY kicked back and the chain would no longer turn. I checked to make sure the chain brake was disengaged and it was. Closer inspection showed that the roller bearings in the nose sprocket has come out and wedged between the outer layer and the sprocket completely locking it down. I contacted the seller and he was VERY nice and sent me a new sprocket tip a no charge. I replaced the tip and figured I was good to go. Nope, the new tip didn't last 5 hours. I contacted the seller again, and he gave me several pointers about what might be causing the issue. Wanting to like this bar, I ordered another tip, replaced the chain, and replaced the rim sprocket so that every component was brand new. The result...another tip that did the exact same thing in about 20 hours of use. I want to like this bar better, but until a more durable nose sprocket is developed for professional use, I will not be buying anymore Tsumura bars. As a comparison, we've used Stihl and Husqvarna bars for hundreds of hours, and with proper maintenance we have only had one other nose sprocket go out...after 250+ hours of use. Hope this helps someone make a more informed buying decision
Scritto da: Stan Halat
Worth the extra money
First time useing this bar and am impressed with it. Strong steel, light and strong tip.
Scritto da: Timothy M.
Nice!
In my opinion these are the best bars made !
Scritto da: Diezel
Appears to be well made.
Appears to be well made, will update this review after a few months cutting. ????
Scritto da: T. Black
HAVE USED AND BOUGHT MANY OF THIS BRAND LIGHT WEIGHT AND STANDARD BAR THEY ARE TOP NOTCH
LONG WEAR LIGHT WEIGHT GOOD LOOKS PRO BAR WHAT IS NOT TO LIKE ...KEEP THE BAR TIP GREASED , THE OILING PORT CLEAR .....AND CARRY ON FOR YEARS

Σχετικά προϊόντα

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array