Tap Magic 30004P ProTap Cutting Fluid, 4 oz. Μέγεθος 4 ουγγιές Υγρό κοπής

Name: Tap Magic 30004P ProTap Cutting Fluid, 4 oz. Μέγεθος 4 ουγγιές Υγρό κοπής
Brand: Tap Magic
SKU: 0662387300045
Price: 38.98 EUR
Availability: InStock

Brand:Tap Magic

3.8/5

€
38.98

Αυτό το φιλικό προς το περιβάλλον υγρό κοπής είναι πλήρως βιοδιασπώμενο και μπορεί να εφαρμοστεί σε όλες τις εργασίες κοπής και μετάλλων. Καμία λειτουργία ή μέταλλο δεν θα σταθεί εμπόδιο στο Tap Magic Protap.

Ποσό

Προσθήκη στο καλάθι Αγορασε τωρα

EAN: 0662387300045

Κατηγορίες Βιομηχανικά & Επιστημονικά, Εργαλεία κοπής, Εργαλεία κοπής Ψυκτικά υγρά,

Αποδίδει εξαιρετικά λεπτό φινίρισμα και προάγει τη μεγαλύτερη διάρκεια ζωής του εργαλείου. Διαχέει τη θερμότητα γρήγορα και παρέχει στενότερες ανοχές. Εξαιρετικά αποτελεσματικό για σκληρά μέταλλα όπως ο ανοξείδωτος χάλυβας. Δεν λερώνει ούτε αλλάζει τις ιδιότητες ακόμη και μαλακών μετάλλων όπως το αλουμίνιο. Χρήση για διάτρηση, τρύπημα, φρέζα - οποιαδήποτε κοπή σε οποιοδήποτε μέταλλο όταν απαιτείται βιοδιασπώμενο υγρό κοπής στο περιβάλλον σας.

Brand	Tap Magic
Brand	‎Tap Magic
Country of Origin	‎USA
Customer Reviews	4.7 4.7 out of 5 stars 3,326 ratings 4.7 out of 5 stars
Is Discontinued By Manufacturer	‎No
Item model number	‎30004P
Item Weight	4 Ounces
Item Weight	‎4 ounces
Liquid Volume	4 Fluid Ounces
Manufacturer	‎Tap Magic
Manufacturer Part Number	‎30004P
Package Information	Bottle
Product Dimensions	‎6 x 5.75 x 4.75 inches
Recommended Uses For Product	Cutting oil

5 Star

4 Star

3 Star

2 Star

1 Star

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με^*

Η βαθμολογία σας

Scritto da: Pachyderm

Wonderful Product!

man, I snap tiny taps all the time. Because they are tiny almost no force can be applied to them. I have used cutting oils before, but this is the FIRST product whereby I apply it and the tapping gets done quickly and without incident. I bought it after having to drill and tap 303 stainless rod with M3x0.5 threads. Once that alloy has been drilled with a drill press it has already started to work harden, so the tiny tap is a victim before you even start. I had to produce about twenty end-drilled and tapped 6mm rods one afternoon and I snapped off eight taps. I have excellent thread-cutting skills and have been doing this for several decades now. This 303 alloy was new to me and I was doing it wrong, somehow, I guess. I had to waste a lot of linear rod by cutting off the ends because the dang tap was stuck in there. I had been considering your product for some time and that day finally pushed me to order a small bottle. I use it just about every day, to include a lot of this same size/pitch (M3x0.5), and have not snapped a tap or drill bit since. Not a single one in thousands of operations. It is sticky and you have to clean up after you use it, but it smells nice. What is that? Key Lime scent? It smells like pie, man. Nice. I am now a loyal customer. Great product. Highly recommended!

Scritto da: Angelo

It worked nicely.

Not too thick, but it had enough viscosity to stay in place while drilling vertically. I'm happy I got it. You don't need much This little size will last a long time.

Scritto da: Russ

Good lubrication, low burnoff

No dislikes, lubricated well on many large diameter holes in plate steel, low burnoff lasted thru drilling in one inch thick (25mm) steel plate with holes ranging from 7/16"(11mm) to 1-1/8"(29mm)

Scritto da: John Bronder

My favorite tap/cutting oil

I use this all the time for taps, dies, drilling, ect. It works really well and it smells nice too. It gets 4 stars because the little red cap on the tip will sometimes pop off if you drop the bottle. They should get a more secure design.

Scritto da: Ruben

Important !

Kept my bits cutting n cool !!

Scritto da: Charles slipcevic

It works grate

It saves on my drill bits before I found this I was burning up my bits like crazy thank

Scritto da: cinereous

Low odor

This smells much better than 3-in-oil, and works much better too.