Shop Fox D4586 Σφιγκτήρας επιτραπέζιου πριονιού φράχτη (Σετ των 2)

Brand:Shop Fox

3.2/5

64.42

Αυτός ο σφιγκτήρας φράχτη επιτραπέζιου πριονιού γενικής χρήσης είναι τέλειος για την τοποθέτηση ενός βοηθητικού φράχτη στα εργαλεία του καταστήματός σας. Τέρμα οι πονοκέφαλοι προσπαθώντας να χρησιμοποιήσετε ογκώδεις σφιγκτήρες C ή βίδες που καταστρέφουν τον φράχτη σας. Χρησιμοποιήστε το σε επιτραπέζια πριόνια, πριονοκορδέλες, φράχτες δρομολογητή ή σχεδόν οποιοδήποτε μηχάνημα χρησιμοποιεί φράχτη. Ιδανικό για τη δημιουργία μπλοκ στοπ, που χρησιμοποιούνται ως σκυλιά πάγκου και μια σειρά από σπιτικές σέγα. Η χρήση ευρύτερου βοηθητικού υλικού φράχτη επιτρέπει τη χρήση σε φράκτες που είναι στενότεροι από την αναφερόμενη χωρητικότητα σφιγκτήρα.

Δεν υπάρχουν διαθέσιμες μονάδες
Πωλούνται σε ζευγάρια. Ο βοηθητικός φράκτης απαιτεί οπές 3/8" για πείρους σφιγκτήρα. Οι σφιγκτήρες χαμηλού προφίλ μένουν έξω από το δρόμο. Κατασκευή από χάλυβα βαρέως τύπου. Χωρητικότητα: Ελάχιστη: 2-1/2, Μέγιστη: 5-1/2.
Batteries Required? ‎No
Brand Shop Fox
Country of Origin ‎China
Customer Reviews 4.2 4.2 out of 5 stars 30 ratings 4.2 out of 5 stars
Included Components ‎Universal Fence Clamps
Item Dimensions LxWxH 4 x 2.5 x 6.5 inches
Item model number ‎D4586
Item Package Quantity ‎1
Item Weight 1 Pounds
Item Weight ‎1 pounds
Manufacturer ‎Woodstock International
Material Alloy Steel
Material ‎Alloy Steel
Measurement System ‎Metric
Part Number ‎D4586
Product Dimensions ‎4 x 2.5 x 6.5 inches
Style Modern
Style ‎Modern

3.2

11 Review
5 Star
56
4 Star
28
3 Star
5
2 Star
0
1 Star
10

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: John Schreiber
Good with a little tweak.
Works as expected. The bends were not exactly 90 degrees, so when I tightened it, they pulled the top of the sacrificial fence out of alignment with the bottom. I put the pin in my vice and bent to 90. Perfect now.
Scritto da: michael scholes
Works well
Good tool. This allows you to easily mount an aux wood fence to your table saw. You can then set a blade right up agsinst the fence without worrying about damaging the blade. For example if you are cutting a 3/4 wide rabbet on the end of a board to mate with another board. I used a scrap piece of 5/4 and drilled two 1/2” holes.
Scritto da: Angry Woodworker
good clamps, but a little to thick a diamer
the thick diameter means you have to have a pretty thick waste board, or go with some pretty thin edges on a 3/4" board.
Scritto da: Mike Vincent
Strong
Heavy duty and well made. Great value!
Scritto da: Phil
Not worth the money.
We’re not at 90°. The 3/8 diameter is not correct due to all the pain that I had to scrape off I had to go to 64th of an inch bigger. It’s easier for me to throw them away then return them.
Scritto da: Mark Dixon
Five Stars
Works great to make fence jigs ease to install and remove. It is well-made and sturdy.
Scritto da: robert balzer
Five Stars
These are exactly what I needed
Scritto da: Jerry J. Bromenshenk
Well made and had sufficient reach for my classic Craftsman saw.
I use a Besemeyer Fence. These clamps solidly hold sacrifice fence.
Scritto da: Mark kohut
Needs a wide fence guide greater than 2".
My fence guide was too narrow so I added an extra 2x4 between the clamp and the fence so the clamp had something to hold on to. Works great!
Scritto da: Amazon Customer
Five Stars
Good quality! Works great.
Scritto da: Robert E. Dunn
Great product.
I should have got one sooner, it would have saved time not clamping a board to my fence !!

Σχετικά προϊόντα

hot
Οδηγός BOSCH FSNWAN Track Miter
2.9/5

€ 196.27

Οδηγός BOSCH FSNWAN Track Miter
2.9/5

€ 196.27

hot
3.7/5

€ 80.62

3.7/5

€ 80.62

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array