Scepter 08580 OEM Φορητό 6,6 γαλόνι θαλάσσιας δεξαμενής καυσίμου για σκάφη εξωλέμβιου κινητήρα, 21-1/2-ίντσες x 14-ίντσες x 9-ίντσες, κόκκινο

Brand:Scepter

3.4/5

212.24

Εξαιρετική για χρήση με εξωλέμβιες μηχανές και σχεδιασμένη σύμφωνα με διεθνή πρότυπα, η φορητή δεξαμενή καυσίμου θαλάσσης Scepter είναι εύκολη στη μεταφορά και διαθέτει το αεριζόμενο καπάκι 2 κατευθύνσεων της Scepter. Η δεξαμενή χαμηλής διαπερατότητας εξαλείφει την εξάτμιση του καυσίμου και διατηρεί την τιμή των οκτανίων περισσότερο. Κατασκευασμένο από υλικό σταθεροποιημένο στην υπεριώδη ακτινοβολία, ο ανθεκτικός σχεδιασμός που είναι ανθεκτικός στη σύνθλιψη διαθέτει μια ενιαία κατασκευή πολυαιθυλενίου χωρίς ραφές που έχει κατασκευαστεί για να τροφοδοτεί τις θαλάσσιες περιπέτειές σας για τα επόμενα χρόνια. Λειτουργεί με καύσιμα με βενζίνη και αιθανόλη. Ήδη παγκόσμιος ηγέτης στον σχεδιασμό και την κατασκευή φορητών εμπορευματοκιβωτίων καυσίμου και νερού για τις ναυτιλιακές και καταναλωτικές αγορές, η σειρά στρατιωτικών προϊόντων της Scepter είναι στιβαρή, αξιόπιστη και κατασκευασμένη για να διαρκέσει.

ΚΑΤΑΣΚΕΥΑΣΜΕΝΟ ΣΤΟΝ ΚΑΝΑΔΑ. ΒΟΛΙΚΟ – Ο συνδυασμένος μετρητής παραλαβής καυσίμου/ορατόμετρο δέχεται τυπικά εξαρτήματα δεξαμενής θαλάσσης 1/4 NPT. ΑΝΘΕΚΤΙΚΗ ΚΑΤΑΣΚΕΥΗ – Σχεδιασμός ανθεκτικός στη σύνθλιψη κατασκευασμένος από σταθεροποιημένο στην υπεριώδη ακτινοβολία, ανθεκτικό στη σκουριά και στη διάβρωση HDPE για μέγιστη ανθεκτικότητα. 2-WAY ENTED CAP – Αυτόματο σύστημα βαλβίδας εισροής αέρα επιτρέπει την είσοδο αέρα στη δεξαμενή κατά τη λειτουργία και την απελευθέρωση πίεσης πάνω από 5 PSI. ΣΥΜΠΑΓΚΟΣ ΣΧΕΔΙΑΣΜΟΣ – Τα χυτά πόδια κρατούν το ρεζερβουάρ μακριά από το δάπεδο για αυξημένο αερισμό και σταθερότητα, ενώ το λεπτό προφίλ διευκολύνει την αποθήκευση κάτω από το κάθισμα. ΕΥΚΟΛΗ ΜΕΤΑΦΟΡΑ – Φορητή δεξαμενή καυσίμων πλοίων με χυτευμένη επάνω λαβή μεταφέρεται εύκολα από την αποβάθρα σε μικρά αλιευτικά σκάφη, λέμβους και άλλα μικρά σκάφη.
Brand Scepter
Brand ‎Scepter
Country of Origin ‎USA
Customer Reviews 4.4 4.4 out of 5 stars 341 ratings 4.4 out of 5 stars
Exterior Machined
Exterior ‎Machined
Fit Type Vehicle Specific Fit
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 21.25 x 14.05 x 9.75 inches
Item model number ‎3004.1539
Item Weight ‎6 pounds
Manufacturer ‎SCEPTER
Manufacturer Part Number ‎08580
Material Polyethylene
Material Polyethylene (PE)
Model ‎GAS TANK OEM CHOICE 6.6 GA L/E
OEM Part Number ‎3-8580-SCEPTER
Product Dimensions ‎21.25 x 14.05 x 9.75 inches

3.4

8 Review
5 Star
74
4 Star
11
3 Star
3
2 Star
2
1 Star
10

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: Ovidio carrillo
comprar otra tapa
Hola el producto esta muy bueno solo queria preguntar como puedo hacer para comprar otra tapa
Scritto da: CaptainMal
Made fine but that gas cap is a bummer.
Gave up on venting the gas cap. One of those stupid EPA caps, it just would not vent. Had to spend $16 and buy an old fashioned cap with a regular screw vent top. You have to take out the fuel gauge fitting to screw in an appropriate quick disconnect. Works fine but noticed that the fuel gauge broke. No biggie for me as the tank is under a rear deck and you cannot see the gauge anyhow. Maybe I take it apart and check. Maybe not.
Scritto da: Debra / John
well made
Great product
Scritto da: m
Good for cost, nice size.
Leaks fuel through line if left pressurized.
Scritto da: Matthew Murphy
Good product, well built- but expensive like all the rest.
All marine fuel tanks are entirely too expensive for what they are imo. That being said, this tank is well made and serves its purpose. It fit a small area in my boat that other tanks wouldn’t. For that purpose, I think it exceeds expectations. It also has a nice fuel gauge. Don’t let quality stop you from buying this tank. It’s very well made and every bit as good as the others. It’s a niche market for these small tanks, so if you’re looking for this one you probably need this size. Take the leap!
Scritto da: Jeremy
Nice little tank- depressurize prior to connecting
Very handy little gas can. Had a bulky 6 gal but it was always in the way. Th instructions explain how to depressurize the tank- LISTEN TO THEM! Not only when opening the tank but also before connecting either end of the fuel line. My only reason for giving 4 stars instead of five is that the intake tube inside the tank does not seem to be able to empty the tank. I Ran out of gas with about a half gallon left as the filter/intake is "up the tube". That having been said I recognize the benefit of this as well.
Scritto da: Robert Terrell
Easier and better than 6gal metal.
No rust , lighter to carry
Scritto da: jjrbus
Should be ashamed of themselves!
In order to install the Yamaha quick connect the fuel gauge/pickup housing needs to be removed. If it was a 1/16th of an inch taller would not have to remove it! Just genius, brilliant. So ok no big deal, I have a couple hundred screwdrivers and bits and the right size star driver. After installing the quick connect the screw is 1/3 under the connector. Meaning the driver has to go in at an angle which is the absolute wrong way to drive a screw. If you have to remove this a few times rotate the screws as I am sure they are not hardened and the heads will quickly strip. What is the matter with these people, If this was not the dimensions I needed I would send it back!!! If I have to drill a hole to vent IT IS GOING BACK!

Σχετικά προϊόντα

hot
Σετ λουράκι attwood Fuel Tank
3.6/5

€ 54.30

Σετ λουράκι attwood Fuel Tank
3.6/5

€ 54.30

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array