Marinco 11095 12V Drop-in Hidden Horn, OEM

Brand:Marinco

3.5/5

69.65

ΠΕΡΙΓΡΑΦΗ ΠΡΟΪΟΝΤΟΣ Τα κρυφά κέρατα Drop-In της AFI συνδυάζουν μια σειρά επιθυμητών χαρακτηριστικών σε μια μονάδα, όπως: Απλή εγκατάσταση με πτώση, Κομψό κούμπωμα στη σχάρα με αδιάβροχο ύφασμα, αυθεντικό ναυτικό ήχο και εύκολη εγκατάσταση μετά την αγορά. AMAZON.COM Αποδίδοντας έναν παραδοσιακό θαλάσσιο ήχο, αυτό το κόρνα σκαφών διαθέτει κρυφό σχέδιο και είναι κατασκευασμένο από την AFI, τον εφευρέτη των πρώτων κόρνων σκαφών κάτω από το κατάστρωμα. Η κομψή ψησταριά της κόρνας, η οποία πωλείται χωριστά, διαθέτει αδιάβροχο ύφασμα και κουμπώνει για εύκολη τοποθέτηση. Η κόρνα τοποθετείται από έξω. Προδιαγραφές * Απαιτήσεις εσωτερικού χώρου: 2 1/4 ίντσες ύψος επί 3 5/8 ίντσες πλάτος και 3 1/2 ίντσες βάθος * Μέγιστη άντληση ενισχυτή: 3 αμπέρ * Βαθμολογία DBA: 105 στο 1 μέτρο * Θεμελιώδη συχνότητα: 440 +/- 20 hertz Σχετικά με την AFI Horns Η AFI είναι ο κορυφαίος προμηθευτής κόρνων στη ναυτιλιακή βιομηχανία, με πάνω από 50 χρόνια εμπειρίας στο σχεδιασμό και την κατασκευή συσκευών ήχου ειδικά για χρήση σε σκληρά θαλάσσια περιβάλλοντα. Ο ανοξείδωτος χάλυβας χρησιμοποιείται για όλα τα κρίσιμα εξαρτήματα όπως τρομπέτες, κάλυμμα κινητήρα, διαφράγματα και εξοπλισμό συναρμολόγησης και τοποθέτησης. Η AFI προσφέρει μια πλήρη σειρά προϊόντων θαλάσσιων κόρνων που έχουν σχεδιαστεί για να καλύπτουν σχεδόν κάθε ανάγκη, συμπεριλαμβανομένων ηλεκτρικών και αεροκόρνων τρομπέτας, συμπαγών κόρνων, ηλεκτρικών και κόρνων αέρα κάτω από το κατάστρωμα και μιας ολοκληρωμένης σειράς κόρνων με μεγάλη ποικιλία επιλογών σχάρας. Εγγύηση κατασκευαστή Η AFI εγγυάται ότι αυτό το προϊόν δεν έχει ελαττώματα στην κατασκευή ή στα υλικά από την ημερομηνία αγοράς για περίοδο ενός έτους. Σχετικά με την AFI Η AFI παράγει μια μεγάλη ποικιλία προϊόντων που ανταποκρίνονται στο τιμωρητικό θαλάσσιο περιβάλλον. Κάθε προϊόν που κατασκευάζει -- από τους ανθεκτικούς κινητήρες και τους βραχίονες υαλοκαθαριστήρα του παρμπρίζ μέχρι μια μεγάλη σειρά από κόρνες σκαφών έως σκάλες και πλατφόρμες κολύμβησης -- είναι σχεδιασμένο να αντέχει στις ακραίες συνθήκες της ζωής στη θάλασσα. Ακόμη και η σειρά επίπλων και αξεσουάρ από ξύλο τικ της εταιρείας έχει σχεδιαστεί για να αποδίδει όμορφα είτε βρίσκεστε στο δρόμο είτε σε ασφαλές λιμάνι.

Το γκριλ πρέπει να παραγγελθεί ξεχωριστά. Εύκολη μετασκευή, στερέωση από το εξωτερικό και η σχάρα κόρνας κουμπώνει για εύκολη εγκατάσταση. 12V DC, Μέγιστη λήψη ενισχυτή: 3 Αμπέρ. Θεμελιώδης συχνότητα: 440+/-20Hz. Αξιολόγηση dB(A): 105 dB στο ένα μέτρο. ΣΗΜΕΙΩΣΗ: Απαιτήσεις εσωτερικού χώρου: 2,25 Υ x 3,625 Π x 3,5 Β.
Brand Marinco
Brand ‎Marinco
Brand Name ‎Marinco
Color Chrome
Color ‎Chrome
Customer Reviews 4.4 4.4 out of 5 stars 746 ratings 4.4 out of 5 stars
Fit Type Universal Fit
Fit Type ‎Universal Fit
Item Package Dimensions L x W x H ‎7.4 x 6.69 x 3.31 inches
Manufacturer ‎Marinco
Noise Level ‎105 dB
Package Weight ‎0.31 Kilograms
Part Number ‎11095
Size ‎Small
Sport Type ‎Boating
Style Drop-in Without Grill
Style ‎Drop-in Without Grill
Voltage 12 Volts
Voltage ‎12 Volts

3.5

13 Review
5 Star
70
4 Star
16
3 Star
6
2 Star
3
1 Star
5

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: Dustin Saiger
Perfect replacement for rusted out horn
My 2016 Robalo Cayman 223 had the horn stop working suddenly. Opened it up, and the horn was a pile of rust failing apart. Ordered this and literally within 15 minutes had the horn swapped and works perfectly. Direct replacement for any bow mounted oval horn with a white or stainless grill. Fit perfectly and two wires just like the factory one. Loudness is about on par as OEM one. Great replacement.
Scritto da: Chris B.
Perfect replacement for stock horn
Bought a used 2005 Bayliner 205 and the horn was not working. This was an was replacement, pry off the cover and three screws and a power plug later our horn is back to working! Have only used for one season so not able to speak to it's longevity but works perfectly so far.
Scritto da: Tracer800
Purchase to replace the same unit that is 14 years old
Direct replacement for the weak one i pulled out of my boat (AFI Model L horn). The unit tested good prior to install in as loud for its size. No Extra modification to mounting holes - direct fit / 14 years later.!!! Did add small piece of window screen material between the cover plate and the horn to prevent insects from building nests (wasps, etc.) in the body of the horn This unit does not come with the White, Black or Aluminum covers. So make sure you keep that from your old unit if you replace it with this one.
Scritto da: sswallow
Worked, but will not hold up over time
Installed this device because it was a drop in for my old one. By the end of the summer it was already dead. Did not hold up to normal use in the ocean. You get what you pay for in this case.
Scritto da: Joe Desanti
Good value
Great option for replacing OEM horn.
Scritto da: GREGORY TEDESCO
Ok
Ok
Scritto da: SunshineStateJG
Easy to install & worked 1st time
This was purchased as a replacement for original horn on 2006 Bayliner. It was an easy fit and worked 1st time. Only niggling aspect is that the original white plastic horn cover did not "Click" back into place on the new horn,(as it had on original horn). So I had to add some adhesive on each of the three locking clips and so far the cover is still holding tight.
Scritto da: Tony. Tente
Great product
Love this horn it was delivered on time highly recommend this product easy to install
Scritto da: Jerry Haggarty
Perfect and as described
Installed it in my 20 runabout boat. Looks great, works awesome.
Scritto da: john chernyk
Factory replacement
Fit perfect I recommend this product !
Scritto da: RT
focntionne très bien
fonctionne très bien.
Scritto da: Erin C Gallant
Good Replacement of Model L Horn for Bayliner 2052 Cuddy Boat
Does not come with grate cover/grill which is odd since there is likely a leak in the original cover plate/grill/thin plastic that caused the original failure. The horn itself is like 3-5mm larger in diameter than the original (plate is teh same though) which made the screw holes shift over to the one side since the side of the horn was hitting the plywood inside the anchor bay. A little shave of the plywood with a drill bit on the inside of the anchor bay allowed the plate holes to line up with the original holes making it a seamless swap. Took approx 5-10 mins to pull out the oldhorn, shave the inner plywood a bit and replace with this horn.
Scritto da: RGB
It’s nice and loud looks good
My boat horn was old and not working this was the replacement model style put it in works like hot damn

Σχετικά προϊόντα

hot
hot
Marinco 11031 Mini Hidden Horn 12V, OEM
2.9/5

€ 73.84

Marinco 11031 Mini Hidden Horn 12V, OEM
2.9/5

€ 73.84

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array