Εξωλέμβια έλικα VEVOR 3-Blade 13,25 x 17

Name: Εξωλέμβια έλικα VEVOR 3-Blade 13,25 x 17
Brand: VEVOR
SKU: 0810087877101
Price: 185.04 EUR
Availability: InStock

Brand:VEVOR

3.5/5

€
185.04

Στιβαρό κράμα αλουμινίου: Τα αντιδιαβρωτικά μας εξωλέμβια στηρίγματα ταχύτητας είναι κατασκευασμένα από κράμα αλουμινίου και κατασκευασμένα για να διαρκούν. Διαθέτει αντοχή εφελκυσμού 260-300 MPA καθιστώντας το ανθεκτικό στη σκουριά και την παραμόρφωση, ακόμη και κάτω από θαλασσινό και γλυκό νερό. Αναβαθμισμένη πλήμνη από καουτσούκ: Η προπέλα εξωλέμβιου κινητήρα είναι κατασκευασμένη με λαστιχένια πλήμνη και 13 σφήνες δοντιών. Το αδιάβροχο κέντρο έχει επίσης ισχυρό αποτέλεσμα απόσβεσης, σχεδιασμένο για την απορρόφηση των κραδασμών και την προστασία του συστήματος μετάδοσης κίνησης από τα περισσότερα χτυπήματα. 13 1/4 Διάμετρος x 17 Βήμα: Οι δύο κύριες μετρήσεις μιας προπέλας σκάφους είναι η διάμετρος και το βήμα. Το βήμα είναι η θεωρητική απόσταση που θα κινηθεί μια προπέλα μέσα στο νερό κατά τη διάρκεια κάθε περιστροφής και η διάμετρος είναι η απόσταση κατά μήκος ενός κύκλου που περιλαμβάνει όλα τα πτερύγια της έλικας. Με 13 1/4 διάμ. x 17 βήμα, η προπέλα του εξωλέμβιου σκάφους μας θα διασφαλίσει ότι το πλοίο σας προχωρά ομαλά και γρήγορα. Ισχυρή ώθηση & σταθερή πρόωση: Η προπέλα του σκάφους μας μπορεί να σφίξει γρήγορα τη δίνη, παρέχοντας μια ισχυρή ώθηση για την πρόωση του πλοίου. Ο μοναδικός σχεδιασμός των λεπίδων των ελίκων επιτρέπει στο σκάφος σας να επιταχύνει πιο γρήγορα και σας επιτρέπει να ελέγχετε την κίνηση στο νερό με μεγαλύτερη ακρίβεια. Είναι κατάλληλο για διάφορες δραστηριότητες θαλάσσιας αναψυχής - από οικογενειακή διασκέδαση έως αθλητικούς αγώνες, φέρνοντας περισσότερη χαρά στο θαλάσσιο σκι. Απευθείας Αντικατάσταση: Το 13 1/4 διαστ. x Η εξωλέμβια έλικα 17 βημάτων είναι συμβατή με την εξωλέμβια 40-140HP 2-Stroke Evinrude, αντικαθιστώντας απευθείας την OEM 765183. Η προπέλα του σκάφους μας βασίζεται στην περιστροφή των λεπίδων στο νερό για να μετατρέψει την περιστροφική ισχύ του κινητήρα σε πρόωση, η οποία θα ταιριάζει καλά στο σκάφος σας .

Δεν υπάρχουν διαθέσιμες μονάδες

EAN: 0810087877101

Κατηγορίες Αθλητισμός & Υπαίθριες δραστηριότητες, Αθλητισμός & Γυμναστική, Αεροπλοΐα και ιστιοπλοΐα, Βάρκες & Εξοπλισμός, Ανταλλακτικά μηχανών σκαφών, Προπέλες,

Brand	VEVOR
Brand	‎VEVOR
Brand Name	‎VEVOR
Color	Black
Color	‎Black
Customer Reviews	4.5 4.5 out of 5 stars 149 ratings 4.5 out of 5 stars
Engine Type	2 Stroke
Engine Type	‎2 Stroke
Included Components	‎1 x Nut, 1 x Outboard Propeller, 1 x Split Pin
Item Dimensions LxWxH	‎13.25 x 7.1 x 13.25 inches
Item Package Dimensions L x W x H	‎14.96 x 14.96 x 7.05 inches
Item Weight	7 Pounds
Item Weight	‎7 Pounds
Manufacturer	‎VEVOR
Material	Aluminum
Material	‎Aluminum
Model Name	‎Replace for OEM 765183, Compatible with 45-140HP Outboard Johnson Evinrude Engine
Mounting Type	‎Engine
Number of Items	‎1
Package Weight	‎3.39 Kilograms
Part Number	‎3 Blades 13 1/4" x 17" Boat Propeller
Recommended Uses For Product	‎For Sport Utility Vehicles
Size	‎13.25" x 17"
Style	‎3-Blade
Suggested Users	‎unisex-adult

5 Star

4 Star

3 Star

2 Star

1 Star

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με^*

Η βαθμολογία σας

Scritto da: Caleb M.

I have no confidence in this product

It looks pretty close to the original spitfire prop, however... I ran into problems while installing it. I will say that I have not used this in the water yet and will be trying it out this weekend if everything goes well. That said, once I can get a new Mercury Prop this thing is going into a storage bin just for a backup. Problem 1 while installing it: The Hub doesn't fit inside the prop. It says "it should slide 3/4 of the way in and then you can push or gently tap" the rest of the way. That was 100% untrue. I had to get a big socket and a rubber mallet and beat that thing in there. Even then I had to tighten the nut down on the prop to get it to seat far enough in for the outer washer to lock onto the splines. I didn't feel good about doing this at all. Problem 2: The picture... After I tightened it down to seat everything I took it apart and put that lock washer on. I tightened the prop nut down to 55 ft-lbs as instructed by Mercury. The lock washer broke both pins off as you can see in the picture. I ended up using the old one and that held up fine. That is a HUGE problem in my eyes. I've had a prop fall off, not get knocked off, come undone and fall off almost 2 miles from the dock. I NEVER want to do that again. It's pretty unforgivable in my eyes, that's a key safety feature and they cheaped out on it. Problem 3 This may not be a problem but after I put it on, it didn't spin very freely while in neutral. I did start the engine up and put it in gear to let it spin and it now feels much better but I'm a bit worried about it. As long as it doesn't fall off this weekend I think we'll be ok. If this thing does have any problems getting the boat up on plane this weekend I'll update this. It looks very close to the mercury prop so I doubt that will be an issue and my main reason for not rating it higher is the terrible fit of the hub and them skimping out on a key safety feature. That lock ring is the cotter pin for those of you that have those on other engines. The one they provided was trash. ********* Update after using it: This is certainly not a "Great" replacement for a spitfire prop. Does it work? yes it certainly does. Is it the same as a mercury Spitfire prop? NOPE, not at all. It may not be a huge difference for everyone but my boat was noticeably slower to plane with this compared to the Mercury Spitfire that I had on it. I was still able to get around the same top speed, it took ages to get there though. Is it worth the price savings you get? For most people probably and I will keep it onboard as a spare just in case but I'll be getting a Mercury prop once I can find one closer to the normal prices. Right now they're about $70 more than what I paid 18 months ago.

Scritto da: vngstr

This is the best prop ever!!!

Tested two weekends ago!! Quick out of the chute, 2500rpm at 40mph, 1.5:1 mercruiser alpha 1 gen 2. could push 65-70. Purchased a second one as a backup... Awesome

Scritto da: james f

Fit great

Fit great would buy again

Scritto da: dennis rieker

having no problems. just as good as merc

works great went from three blade to a four way better haul shot.

Scritto da: Kevin Tran

Great value. Perfect replacement of the Mercury spitfire prop.

My first order went missing for a week. Amazon refunded and I reordered which arrived the next day. Bought it the replace the original Mercury Spitfire prop for my 2006 Mercury 60 hp four strokes outboard. The packaging was great with good instructions and all necessary components and even came with a nice pair white gloves. Prop is exactly the same dimensions as the previous Mercury spitfire that I replaced. All the components are brass alloy which I feel are even better than that of the Mercury spitfire prop which has a plastic splines. I have not yet tested out on the water yet but I have no reason to think that I will not perform as well as the original Spitfire. Will update on the performance later.

Scritto da: Randy Joseph

FANTASTIC PROP FOR THE MONEY

95% of the performance of my OEM Mercury Prop for one-third of the money. Highly Recommended.

Scritto da: Mark

Nut and Carter pin missing

Parts were missing otherwise looked like a great prop

Scritto da: Travis C.

You need a big washer or something

When installing you need a super flat hub washer so this sits flat on the shat if not the propeller will suck into the sterndrive within matter of minutes. If you try to use a standard hub washer it will barely fit threads and will wobble back towards the motor.

Scritto da: L. Briggs

Perfect

1988 Johnson 60HP outboard. Fits perfectly.

Scritto da: Shannon Maude

Fast delivery

Happy with the purchase. Fast delivery.

Scritto da: Glenn H Davies

Good quality, quick delivery

Propeller is good quality however it did not fit the hub on the prop shaft and another hub type had to be ordered which more or less doubled the price

Scritto da: King Francisco Z

Need to buy adapter for Mercruiser 3l but good pitch

NNED ADAPTER FOR MERCRUISER 3.O

Scritto da: mur ...

fast shipping

4 blades work well