EKLIND 92600 PSD Ball-Hex (allen) Precision Screwdriver - Σετ 6τμχ Metric MM μεγέθη 1,3-4

Name: EKLIND 92600 PSD Ball-Hex (allen) Precision Screwdriver - Σετ 6τμχ Metric MM μεγέθη 1,3-4
Brand: Eklind Tool
SKU: 0037516926005
Price: 55.26 EUR
Availability: InStock

Brand:Eklind Tool

3.2/5

€
55.26

Η EKLIND TOOL COMPANY είναι ο κορυφαίος κατασκευαστής στην Αμερική εξαγωνικών κλειδιών υψηλής ποιότητας, βιομηχανικής ποιότητας, που κατασκευάζονται με υπερηφάνεια στις Η.Π.Α. από το 1950. Το κατσαβίδι ακριβείας EKLIND 92600 PSD Ball-Hex (allen) - σετ 6 τμχ Metric MM μεγέθη 1,3-4 st. απαιτήσεις επαγγελματιών μηχανικών, εμπόρων, φτιαγμένων μόνοι σας και χομπίστες.

Ποσό

Προσθήκη στο καλάθι Αγορασε τωρα

EAN: 0037516926005

Κατηγορίες Εργαλεία & Είδη οικιακής βελτίωσης, Βιομηχανικά & Επιστημονικά, Εργαλεία ισχύος & χειρός, Εργαλεία χειρός, Κλειδιά, Κλειδιά με κλειδί,

Ανθεκτικό σε λάδια και χημικά. Τα μεγέθη σημειώνονται μόνιμα στο καπάκι. Επεξεργασμένη άκρη ακριβείας. Περιστρεφόμενα ακραία καπάκια. Η οικονομική λαβή προσφέρει άνεση και έλεγχο. ΓΡΗΓΟΡΑ ΚΑΙ ΑΠΟΤΕΛΕΣΜΑΤΙΚΑ- Τα κλειδιά Ball-Hex EKLIND λειτουργούν σε γωνία έως και 30 μοιρών για πρόσβαση σε δύσκολα προσβάσιμα κουμπώματα με κεφαλή υποδοχής. Τα κατσαβίδια ακριβείας EKLIND PSD έχουν επεξεργασμένες μύτες ακριβείας, μεγαλύτερες λαβές με μαλακό καλούπι για άνεση και εργονομία και ένα μεγάλο κάλυμμα περιστροφής για ακριβή έλεγχο με το μέγεθος διαμορφωμένο στο καπάκι. ΠΡΟΣΔΙΟΡΙΣΤΕ ΤΑ ΕΡΓΑΛΕΙΑ ΣΑΣ- Τα μετρικά μεγέθη είναι χρωματικά κωδικοποιημένα με μπλε, ώστε να μπορείτε να φτάσετε γρήγορα για το σωστό εργαλείο. ΑΝΤΑΠΟΚΡΙΝΕΙ Ή ΥΠΕΡΒΑΙΝΕΙ ΟΛΑ ΤΑ ΙΣΧΥΟΝΤΑ ΠΡΟΤΥΠΑ- Τα εργαλεία EKLIND πληρούν ή υπερβαίνουν τα τυπικοί κανονισμοί που ορίζονται στη νομοθεσία ANSI, ASME, RoHS, REACH, CA Prop 65 και Dodd-Frank Conflict Minerals. ΒΕΛΤΙΣΤΗ ΑΝΤΟΧΗ- Αυτά τα εργαλεία EKLIND είναι κατασκευασμένα από κράμα χάλυβα EKLIND που έχει υποστεί θερμική επεξεργασία, σβήνει και μετριάζεται για βέλτιστη αντοχή, ροπή και ολκιμότητα για ασφάλεια και είναι επικαλυμμένο με ανθεκτικό στη σκουριά φινίρισμα. Τα εξαγωνικά κλειδιά EKLIND (κλειδιά allen) χρησιμοποιούνται για την οδήγηση εσωτερικών εξάγωνων συνδετήρων (κεφαλή allen). Περιέχει μεγέθη MM: 1,3, 1,5, 2, 2,5, 3, & 4. MADE IN AMERICA- Επαγγελματικά εργαλεία υψηλής ποιότητας, βιομηχανικής ποιότητας κατασκευασμένα στις Η.Π.Α.

Brand	Eklind Tool
Color	Multi
Country of Origin	USA
Department	Unisex-Adult
Domestic Shipping	Item can be shipped within U.S.
Head Style	Hex
International Shipping	This item can be shipped to select countries outside of the U.S.
Is Discontinued By Manufacturer	No
Item model number	92600
Manufacturer	TV Non-Branded Items
Material	Blend
Number of Items	6
Product Dimensions	1 x 13.06 x 3 inches; 4 Ounces

5 Star

4 Star

3 Star

2 Star

1 Star

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με^*

Η βαθμολογία σας

Scritto da: Joshua Bryan

Great tools

So I do a lot with 3d printers and was needing a good set of metric Hex set. They are a little long for th3e tight spots of printers, but for the main reason i got them they work great (direct driver and grub screws). They are really good for small size screws which is the big reason i wanted a good set. The only complaint is it comes in a plastic bag like case which is big for what these tools are, but i don't really care about that as they were just put in my 3d printer tool box. Well worth the purchase.

Scritto da: AK

Nice set of screwdrivers

They all work, correct size, plenty strong for my uses. Good buy.

Scritto da: happy Dad

This set wins my review of 4 driver sets. Large and nice feel.

I bought 4 sets of allen drivers and needed primarily the 1.5 to 3mm drivers. The summary: the EKIND 92600 precision set definitely is the best if you need small drivers. The small drivers in the EKLIND 90609 set come in second place, with the advantages of really nice bigger drivers as well. The Bondhus are best for 3mm+ drivers but worst for the smallest drivers. The Wiha drivers are OK but are all a little small for adult hands, and the sizes can't be read. The picture shows only the 1.5, 2, 3mm sizes of each set. The individual comments below are listed in the same order as the picture. EKLIND 90609 Ball-Hex (allen) Screwdriver - 9pc set Metric MM sizes 1.5-10 - Up to 10mm was a big plus for me. The bigger handles are really meaty and nice. The smaller ones are OK, not great but at least as good as all the others I tried. The sizes are printed on the side and a little hard to read. The balls can be cut on these to make "non-ball end" allen drivers. EKLIND 92600 PSD Ball-Hex (allen) Precision Screwdriver - 6pc set Metric MM sizes 1.3-4 - These are my favorite of the bunch by far. Rubber coating on the handles, large. A really nice feel in the hand, swiveling caps. If you need the smallest sizes, this is the best set of the bunch. The sizes are molded into the top of the cap. The sizes are OK but could be bigger. The ball ends can be cut off. Bondhus 10686 1.5-5mm Balldriver Screwdrivers, 6 Piece Set - The 1.5 and 2mm driver handles were too small to hold in anything but 2 or 3 fingers and in my opinion would certainly cause hand cramps if used for more than a few minutes at a time. It's also pretty much impossible to read the sizes printed on the sides of these. The 3mm and bigger sizes felt really beefy and nice in my hand; the 3mm and bigger sizes are the best feeling drivers of all these sets I listed here. The balls can be cut off to make "non-ball" drivers. Wiha 26491 5-Piece Ball Metric End Hex Driver Set - Nice quality but a little expensive and small for what you get. I think trying to assemble an entire R/C car with these would quickly result in hand cramps. The sizes are printed on the side but are wasted ink as they are impossible to read. The ball ends cannot be cut off on these but the end material may be nicer; hard to tell. EDIT: I am concerned about the other reviews that say these break or are rounded off. I haven't used these a lot. Keep in mind my intention is to cut off the balls and use them as straight shaft drivers.

Scritto da: Amazon Customer

Easy to use

When working on 3D printers the standard "L" hex wrenches are awkward to use at times and these work so much better for those tasks. I guess final torquing might need to be done with a "L" wrench, but just how much torque does a small screw require?

Scritto da: C. Robinson

Great kit for 3D printers

Most 3D printers come with a small set of hex wrenches but they're tiny and clumsy to use in tight spaces. Most hex screwdriver sets come with sizes too large to be useful for 3D printers. This is a nice blend between the two - very small sides (down to 1.3mm!) but a pleasure to use.

Scritto da: R. Lovrin

Worked well generally, but do not stress the ball ends

These have worked well for my general use, but I have had 2 out of the 6 (33%) drivers round off their heads while working on my 3D printer and 3D Printed plastic parts. Just today, threading an M3 screw into a 3D printed plastic part, my 3mm driver head rounded off, and I had to finish the screw with a ball-hex L-Wrench. I will be replacing my set with a different manufacturer.

Scritto da: Mark Welker

Well built alternative to traditional Allen keys if you’re looking for speed over torque

I’ve been working on a number of projects with some assembly with metric fasteners, and while traditional Allen keys are universal to a degree, never the fastest. I’ve been putting hex driver bits into some of my screwdrivers, and could spin t-handle hex keys, these precision screwdriver style ball-end Allen keys have been a major time saver for me during assembly steps. Lightweight, decent balance, good reach and the ball end fits fairly well to the socket head machine screws I’ve been using, making it a little easier to place the screws. The clear vinyl packaging included with the screwdrivers isn’t much to write about, it works for storing the screwdrivers when not in use, but not the most practical either with some odd folds to keep the tools in place. While I haven’t thrown away the case yet, nor find it work knocking a star off this rating, the screwdrivers have either been loose in my tool at when needed in the field, or looking at adding a screwdriver holder to my workbench or pegboard, and so far the screwdrivers seem to be holding fairly well. If I wear out the tips or handles get loose (which I’ve seen on similar drivers when over torqued) these are affordable enough and work well enough I could see buying these again

Scritto da: Jon M

Just what you have come to expect from Eklind.

Eklind is your classic, made in USA, manufacturer. This is a precision set and it seems to have good and tight tolerances. I am very pleased with the purchase.

Scritto da: S R Smith

May be precision but they are not strong.

Disappointed. Items look and feel very cheap and sorry to say the 1.5mm key rounded off the first time I used it. I was trying to loosen a collar on an RC helicopter and it couldn't take the strain. Not sure how long the others will last but I certainly won't try them on anything tight.