Dremel 105 Engraving Cutter, 1/8 Shank , Grey 1/32 2 PK

Name: Dremel 105 Engraving Cutter, 1/8 Shank , Grey 1/32 2 PK
Brand: Dremel
SKU: 5509005536668
Price: 37.19 EUR
Availability: InStock

Brand:Dremel

3.8/5

€
37.19

Για χρήση με περιστροφικά εργαλεία που μπορούν να φιλοξενήσουν μέγεθος στελέχους 1/8. Διάμετρος εργασίας: 1/32-in (0,8 mm, στέλεχος: 1/8-in (3,2 mm), υλικό: χάλυβας υψηλής ταχύτητας. Το σχήμα μπάλας του μύτη χάραξης μπορεί να χρησιμοποιηθεί για την κατασκευή κοίλων κοπών ή υλικού για κοιλότητες - το Η άκρη κάνει στρογγυλές σχισμές και αυλακώσεις και μπορεί να χρησιμοποιηθεί για στρογγυλεμένες πλαϊνές τομές. Ιδανικό για λεπτομερή αφαίρεση υλικού σε εφαρμογές όπως διαμόρφωση, σκάλισμα, χάραξη, κούφωμα, αυλάκωση, σχισμές, ένθετα, δημιουργία κωνικών οπών ή δρομολόγηση με το χέρι. Χρησιμοποιήστε κομμάτια σε υλικά όπως ξύλο, υαλοβάμβακα, κεραμικά, πλαστικό, κοσμήματα και μαλακά μέταλλα Τα ευέλικτα και εύχρηστα κομμάτια χάραξης της Dremel διευκολύνουν την έκφραση της δημιουργικότητάς σας.

Δεν υπάρχουν διαθέσιμες μονάδες

EAN: 5509005536668

Κατηγορίες Εργαλεία ισχύος & χειρός, Μέρη & αξεσουάρ ηλεκτρικών εργαλείων, Αξεσουάρ ρούτερ, Router Bits, Διατρητές ευθ, Σπειροειδής & τελειώματα μπιτ, Στραχύς,

Batteries Included?	‎No
Batteries Required?	‎No
Brand	Dremel
Color	‎Gray
Customer Reviews	4.7 4.7 out of 5 stars 3,095 ratings 4.7 out of 5 stars
Included Components	‎Unit^Instruction Guide
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	4 x 2 x 0.3 inches
Item model number	‎105
Item Package Quantity	‎1
Item Weight	‎0.3 ounces
Manufacturer	‎Dremel
Material	Steel
Material	‎Steel
Measurement System	‎Metric
Part Number	‎105
Power Source	‎Hand Powered
Product Dimensions	‎4 x 2 x 0.3 inches
Shank Type	Straight
Size	‎1/32"
Style	‎2 PK
Thickness	‎1 Inches
Tool Flute Type	Straight
Warranty Description	‎No

5 Star

4 Star

3 Star

2 Star

1 Star

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με^*

Η βαθμολογία σας

Scritto da: VANESSA

Work great

Work great on my old school dremel tool.. long lasting tip

Scritto da: Pavi Elle

My favorite for carving

This is one of my favorite dremel pieces for carving wood. They last a long time before needing to be replaced.

Scritto da: Jonathan Huffin

*Drum Roll* 2 days later, we have....not what I was expecting?

I purchased this alongside purchasing a dremel, 105 bit, and one of Dremel's rotating shaft add on (by the way, highly suggest that. Much lighter) But I digress. This 108 bit is pretty stinking cool. I do a LOT of micro carvings and details and this allows me to do it. The product pictures didn't really show the tip in as much detail as I had expected and I didn't fully realize that was squared...well, more triangled. Sharp flat tip that tapers downward towards the shank. I removed a star for the lack if detail on that and attempted to better show the tip details for anyone else who is blind (or too busy to find your high school, low prescription glasses that you very rarely need....life happens). Honestly anticipating hating it because I'm not a fan of change. If I order something I am imagining what I'm getting and this wasn't that. I kind of like it. Not for the same details I was expecting to use it for, but I believe once I get over the slight learning curve, this will make an excellent outline and fine, angel hair-like, details. Price is about the same as it is everywhere else in store. So that's pretty cool when you save gas money with Prime's free shipping. Though Dremel brand is notoriously more expensive than a lot off off brands and it is unnecessary. I have only found one brand with QUALITY and affordable super small bits....aaaand I literally can't find them anymore. Otherwise, for basic bits, grinding stone bits, polishing bits, larger bits....but off brand. Theres nominal differences in most cases. With super small bits, I purchase name brand. They do tend to last slightly longer and a lot of times are hard to find in Dremel's bit sets which often include a bunch of stuff I dont often use. So this was worth it to me. These bits will fit dang near any rotary tool or rotating shaft set up, no matter the brand. Very few brands have their ends different but they make collettes to attach that usually come with almost any off brand as they expect their users to align with the "Dremel" branded tips. Super cheap. Super worth it sometimes. I will say that it arrived 2 days after it said it was delivered which is an Amazon issue, not necessarily a product issue. Amazon has been contacted and they were super sweet and helpful. But it definitely added to the product experience.

Scritto da: Bruce Pflieger

Original Dremel 105 engraver; perfect!

If you have a Dremel then you must have one of these small engraving tools that can be used for many things including small surgeries. The small head will cut through just about anything.

Scritto da: Jason

Work well for those small carving.

Small Carveing works well. This is my go to for detail work.

Scritto da: D. Henry

Works perfectly on my old model 290

Works perfectly on my old Dremel engraver model 290.

Scritto da: Alec Morison

Sharp

Very sharp works well

Scritto da: Kasparsport

Make sure you angle bit on your project

So with these bits you have to angle them as to not snap heads off. I’ve used other bits with no problem at all but these two bits broke within minutes apart, guess I wasn’t angling them enough

Scritto da: Per-Jakez B.

My new favourite for engraving brass

Works perfectly for soft metals.

Scritto da: Johnny Quickdraw

Great for tiny details

Great quality, and perfect for hair and feathers on wood carvings.

Scritto da: wendy campbell

Five Stars

Perfect for small areas

Scritto da: Amazon Customer

works ok

it is working the way it should be.

Scritto da: Amazon Customer

Wrong image.

The image of this bit is round but the actual 109 is flat. I've found at least one other review dating back to over a year ago pointing this out, so they clearly know they're screwing people. If you need a round bit look for a 107.