Concord Blades CBN045A10CP 4.5 Γρανίτης και μάρμαρο Narrow-Turbo Wave Diamond Blade για κοπή γρανίτη, μαρμάρου και πέτρας. 4,5 ίντσες

Name: Concord Blades CBN045A10CP 4.5 Γρανίτης και μάρμαρο Narrow-Turbo Wave Diamond Blade για κοπή γρανίτη, μαρμάρου και πέτρας. 4,5 ίντσες
Brand: Concord Blades
SKU: 0812763024922
Price: 41.83 EUR
Availability: InStock

Brand:Concord Blades

3.2/5

€
41.83

Λεπίδα διαμαντιών 4,5 ιντσών από γρανίτη και μάρμαρο στενού στροβιλοκινητήρα. Αυτή η λεπίδα έχει έναν εσωτερικό πυρήνα κύματος εξαιρετικής ποιότητας που έχει στενά δόντια turbo τύπου φερμουάρ που παρέχει εξαιρετικά γρήγορη και ομαλή κοπή με ελάχιστη κοπή. Ο ειδικά σχεδιασμένος πυρήνας κυμάτων είναι για πρόσθετη αντοχή πυρήνα, έλεγχο ταλάντωσης και εύκολη μεταφορά των συντριμμιών. Μπορεί να χρησιμοποιηθεί για την κοπή γρανίτη, μαρμάρου, πέτρας και επιστρώσεων χρησιμοποιώντας γωνιακό μύλο, πριόνι υγρής πέτρας και δισκοπρίονο. Αυτή η λεπίδα μπορεί να χρησιμοποιηθεί υγρή ή στεγνή.

Ποσό

Προσθήκη στο καλάθι Αγορασε τωρα

EAN: 0812763024922

Κατηγορίες Εργαλεία & Είδη οικιακής βελτίωσης, Εργαλεία ισχύος & χειρός, Μέρη & αξεσουάρ ηλεκτρικών εργαλείων, Δίσκοι πριονιού, Ανταλλακτικά & αξεσουάρ, Blades, Δίσκοι διαμαντένιου πριονιού,

Ο ειδικά σχεδιασμένος πυρήνας κύματος παρέχει αντοχή στον πυρήνα, έλεγχο ταλάντωσης και απομακρύνει τα συντρίμμια. Κόβει Γρανίτη, Μάρμαρο, Πέτρα και Πλακόστρωτα. Χρήση σε γωνιακό μύλο, πριόνι υγρής πέτρας ή κυκλικό πριόνι. Σούπερ γρήγορη κοπή με ελάχιστη κοπή, ακόμη και σε στεγνή κοπή. Χρησιμοποιήστε το Dry/Wet. Ύψος τμήματος 10mm, 0. 090 Πλάτος τμήματος, 7/8-20mm-5/8 Arbor with Double Bushing and 4 Flush Mount Holes.

Batteries Required?	‎No
Brand	Concord Blades
Brand	‎Concord Blades
Color	Silver, Gold
Color	‎Silver, Gold
Compatible Material	Marble, Stone
Compatible Material	‎Marble, Stone
Country of Origin	‎China
Customer Reviews	4.2 4.2 out of 5 stars 137 ratings 4.2 out of 5 stars
Included Components	‎Blade
Item Dimensions LxWxH	4.5 x 0.09 x 4.5 inches
Item Dimensions LxWxH	‎4.5 x 0.09 x 4.5 inches
Item model number	‎CBN045A10CP
Item Package Quantity	‎1
Item Weight	‎4.8 ounces
Manufacturer	‎Concord Industrial Products
Material	Marble
Material	‎Marble
Number Of Pieces	1
Number Of Pieces	‎1
Part Number	‎CBN045A10CP
Product Dimensions	‎4.5 x 0.09 x 4.5 inches
Size	‎4.5-Inch
Style	Compact
Style	‎Compact

5 Star

4 Star

3 Star

2 Star

1 Star

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με^*

Η βαθμολογία σας

Scritto da: Blueblaze

Works fine

Not sure what the bad reviews are about, but I suspect the ones complaining about wobbling and being unbalanced are due to the cheap little insert to resize the arbor hole. My grinder supports both sizes (7/8 and 5/8), but when I first installed it on the 5/8" arbor, the insert popped out. So I used the 7/8 hole and it worked fine. Another source of confusion could be that there are no markings on the blade other than an illegible smudge that might have been intended as a blade direction arrow. If you install it backwards, it's obviously not going to cut right. Like everything else these days, it's made in China, and the quality is not what we used to expect back when America used to make things But it works OK. I was able to enlarge a 1-1/4" Silestone countertop (i.e. quartz) for a new range, in-place, with no problem, mostly dry (I squirted a little water in the kerf on each pass to keep down the dust). Now, if someone could explain to the Koreans why bigger is not necessarily better, I'd be a happy camper. Wouldn't it be amazing if all "30 inch" slide in ranges were actually 30 inches?

Scritto da: David Ellison

Quickly cuts granite

I bought this blade to cut some scrap granite that had been cut out of a granite counter. Overall this blade cuts the granite very well. I do a little machining and polished granite makes a very accurate reference flat surface. I wanted to cut the scrap granite into usable pieces for the shop. I have 2 angle grinders, a Harbor Freight and a Metabo. I started with the HF. It was difficult to center the blade in that angle grinder. I did get it centered and clamped. I started a cut then the blade stopped spinning. The gold center ring in the blade had separated. After that I couldn't get the blade clamped in the Harbor Freight angle grinder. The Metabo has a toolless clamp nut. The blade without the gold center ring had a larger hole. The Metabo had no trouble centering and clamping the blade. In all fairness the center ring isn't designed to support the blade, it is there to size the center hole. Anyway the blade worked well with the Metabo. This blade worked very well for me. It cuts granite quickly. I cut a stove cutout in half, cut 4 sides from that piece of granite then cut the ends off a second piece of granite. With angle grinder, one cannot make a single through cut in 1.25" thick granite so it needed to be cut from each side. I cut a total of about 10 to 15 linear feet of granite so 20 to 30 feet of cuts. Then I used it to soften all the square edges and corners of the granite pieces. I'm happy with this blade and well satisfied with the purchase. It performed well. I don't need to cut more but I'm sure the blade would cut many times the amount I cut. The only caveat would be the center ring and the difficulty clamping in the Harbor Freight angle grinder.

Scritto da: jcarlos

I will update as I use it more...

So far so good. I do kitchen and bath remodels, which includes prefab granite and quartz installations. I don't do many reviews, but this blade performed well enough to give credit to. In the past I have bought blades ranging from $10 to $30, and this one exceeds all of them. I could tell right away that it contained many diamonds, but that does not mean anything until you start using it. For comparison, I bought a Stone Pro $20 blade from Contractors Warehouse in Pomona,CA, that blade only lasted a few jobs. Where as a while back, I bought a made in Germany Bosch blade for $30, that blade lasted many, many(enough to lose count of) jobs. This review is mainly for professionals that depend on their tools day in day out, and that means using the blade til it's worn to the rim. If you know of a blade in this price range that does better tell me about it. I use my diamond blades not only for countertops, but also for cutting stucco, such as for door/window install, scoring concrete before using the breaker hammer, and whatever else might come my way.

Scritto da: Ryan

Surprisingly Effective

Used it to dry cut granite flagstone for my patio. Had varying size pieces between 1/2 - 3". Couldn't make it all the way through 3" of course, but it was enough to cut half and knock the rest out with a hammer. Used a cheap HF grinder (4.5 amps), cut through surprisingly quick. Would slow on occasion on some of the bigger more dense pieces, but all in all very happy with it. Probably made a couple dozen cuts and there's still plenty of life left. Also note that it has a 7/8" center hole with an adapter washer for 5/8". Seems obvious now in reading the description and looking at the photo, but I didn't know about it when I was shopping and spent quite a bit of time trying to find a blade compatible with my angle grinder. Which, turns out to support either size as well. Live and learn.

Scritto da: RR

Good, clean cut on granite counter.

I purchased this to use on a skill saw to cut pieces out off my granite island to repurpose it on added cabinet/counter space. It was only purchased for this one purpose and it performed well. With constant water, this blade cut exceptionally clean and handled about 8 feet of cutting. During cutting, I encountered plywood which it will absolutely not touch. Of course, this was expected as it is not a toothed blade. It grinds away material. I set the plunge depth to only cut the granite, then came back with a jigsaw to cut the underlying plywood. This technique worked well. I ended up with a very clean edge and am very happy with this blade.