BriskHeat HSTAT051004 XtremeFLEX Θερμαντική Ταινία με Ρυθμιζόμενο Έλεγχο Θερμοστάτη, 144W, Μήκος 120 Volt: 4 πόδια πλάτος: 0,50 in

Name: BriskHeat HSTAT051004 XtremeFLEX Θερμαντική Ταινία με Ρυθμιζόμενο Έλεγχο Θερμοστάτη, 144W, Μήκος 120 Volt: 4 πόδια πλάτος: 0,50 in
Brand: BriskHeat
SKU: 7430988742419
Price: 242.69 EUR
Availability: InStock

Brand:BriskHeat

3/5

€
242.69

Ασφαλές στη χρήση: Ο θερμαντήρας σκαφών έχει γυάλινες και ηλεκτρικά αγώγιμες μεταλλικές επιφάνειες. το καλώδιο τροφοδοσίας 6 ποδιών εξασφαλίζει μεγαλύτερη προστασία για ένα πραγματικά ευέλικτο, ασφαλές προϊόν. Διαστάσεις: Αυτή η θερμαντική ταινία με θερμοστάτη έχει πλάτος 0,5 ίντσες και μήκος 4 πόδια. ιδανική λύση για την αποπάγωση σωλήνων και βαλβίδων. Ανθεκτικό και ευέλικτο: Το πολυκλωνικό σύρμα αντίστασης και το υφαντό θερμαντικό στοιχείο αυτής της θερμαντικής ταινίας σωλήνα είναι ανθεκτικό στην υγρασία και τα χημικά. Η θερμαινόμενη ταινία για σωλήνες νερού διατίθεται σε προστατευτική θήκη από καουτσούκ σιλικόνης. Ρυθμιζόμενος θερμοστάτης: Ο έλεγχος θερμοκρασίας αυτής της ηλεκτρικής ταινίας θέρμανσης παρέχει γρήγορη ομοιόμορφη θέρμανση έως 425°F (218°C). Ταινία θέρμανσης για σωλήνες νερού: Έχει σχεδιαστεί για έλεγχο θερμοκρασίας διεργασίας, προστασία από το πάγωμα και συμπληρωματική θερμότητα. Η θερμαινόμενη ταινία σωλήνα παρέχει ακριβή θερμική απόκριση όταν τη χρειάζεστε.

Ποσό

Προσθήκη στο καλάθι Αγορασε τωρα

EAN: 7430988742419

Κατηγορίες Βιομηχανικά & Επιστημονικά, Adhesives, Σφραγιστικά & Λιπαντικά, Κολλητικές ταινίες, Ταινία υψηλής θερμοκρασίας,

Brand	BriskHeat
Material	Silicone, Rubber
Number of Items	1
Size	length: 4 ft
Surface Recommendation	Metal

5 Star

4 Star

3 Star

2 Star

1 Star

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με^*

Η βαθμολογία σας

Scritto da: guitar man

Careful not to catch fire

Just like any heat tape, if your tape has air gaps behind it, it can easily burn up, melt, fall apart. Just be cautions on having a good connection between your tape and surface. Otherwise works fine.

Scritto da: Amazon4543

Can be dangerous

This can heat up incredibly hot, the temperature is very difficult to control. The only work around is a programmable outlet, one 1 minute, off 10 minutes. You will need to play around with the timing. Otherwise it's good.

Scritto da: Natson

Good and variable heat for wax melter.

Easy to set up on the valve of my wax melter and select the temperature that prevented clogging with beeswax without over heating. Flexible heating tape was easy to use. The control block was difficult to keep in place so I need to find special tape. Met my needs and recommended.

Scritto da: Cow paddy daddy

I like the product

I like the product. It seems to work well on brass and or copper fittings and pipes. It does not mention plastic pipes such as Pex. The thermostat is a bit out of sink and it would be nice to have a better labelling system on the dial. I had to use zip ties to hold it in place so hoping those will not melt. So far so good not more frozen pipes. If it works for a few more months I will recommend it to our tankless water heater providers and installers for freeze prevention product.

Scritto da: Ralph

Beware the model sent me was a BSTAT101004 That model ...

Update 6/18/2018 I purchased the HSTAT model installed it on a copper drain line that only has water in it 5-6 times a day. 4 tapes burned out because in my option they are not enginnerd to be installed on an empty copper pipe (drain line) my guess is the thermostat is not sensitive enough to detect temperatures at that density/mass of an empty copper pipe. I was determined to get this tape to work as i need the heat output watts/amps this product supplies. I should have contacted the mfg sooner they are in process of suggesting a different solution. FYI: I had no success in insulating and wrapping a copper drain from a HVAC evaporator . Beware the model sent me was a BSTAT101004 That model BSTAT is NOT thermastically controlled,.it is a time and percentage controller. I called tech support at BriskHeat because it would cycle on and off in no set or predictable time frame. They said you had to experment to detrmine the time in between on and off to heat to your target temp. I used a temp gun and set the timer so the copper pipe would reach about 100 degs which was less than a min i monitered as often as could i never came back and found it on and my pipe was warm but not at close to the 100 degs i needed. Caution: if left if on long enough (setting time longer) will heat to around 400 degs. Which will melt most rubber pipe insulation. This is what happened to me as i increased time hoping to keep pipe at close to my target temp.

Scritto da: R. T. Stange

My wife was happy - but now affraid of fire.- worked perfectly for about 6months.

Just what I needed. Problem of waiting 2-3 min to get hot water is gone. Mounted on under side of copper pipe. Only installation problem is mounting the control box so the temperature sensor (located directly below center of dial) is touching the pipe. The instructions are poor. More time was put into making instructions for multi language than information. UPDATE - Worked perfect for about 6 months. - Then, didn't go on an normal. Tested and set to just go on at current room temp. worked fine for another couple weeks. - Then I smelt something hot and maybe burning. Found unit running so hot insulation was falling off of pipe. Rechecked mountings and found thermostat still firmly attached to proper location on pipe. My wife is now scarred of this thing and said 'It is not worth a fire'.

Scritto da: Kung V.

gets very hot very fast, but the temperature dial ...

gets very hot very fast, but the temperature dial is way off!!! We took digital thermometer readings and when the temp is set to just the 50 degree ferinhiet mark, the heat tape reads at about 134 degrees ferinhiet

Scritto da: Amazon Customer

JUNK

If you are heat a pipe to room temperature, this is OK. If a higher temperature, grab some marshmellows to cook over the smoldering mess. The control know is also very flimsy and mine was lying in the box upon receipt, hence very inaccurate temperature settings. I thermocoupled since I did not trust and the rubber burnt at a little over 200-degree.