Attwood 1731-4 Turbo 3000 Series In-Line Bilge Blower, Εσωτερικός σωλήνας εξαερισμού 3 ιντσών, 12 Volt

Brand:Attwood

3.6/5

77.78

Αυτός ο φυσητήρας Attwood Turbo 3000 Series In-Line παρέχει εξαιρετική ροή αέρα εξαερισμού για χώρους όπως διαμερίσματα κινητήρα, μαγειρεία, υδροσυλλέκτες και κεφαλές. Διαθέτει πατενταρισμένη, εν σειρά σχεδίαση και ο ανεμιστήρας 5 λεπίδων μεγιστοποιεί τη ροή αέρα και την απόδοση. Η σάρωση και το βήμα της λεπίδας έχουν σχεδιαστεί για υψηλό συντελεστή ανύψωσης, που οδηγεί σε αυξημένη ταχύτητα ροής αέρα για βελτιστοποιημένο αερισμό. Κανένας άλλος φυσητήρας υδροσυλλεκτών στη βιομηχανία δεν παρέχει τόσο ισχυρή απόδοση συστήματος σε τόσο χαμηλή ισχύ εισόδου σε μικρό μέγεθος. Η ροή αέρα του συστήματος υπερβαίνει τους εν σειρά φυσητήρες παλαιότερου τύπου έως και 25%. Είναι επίσης έως και τέσσερις φορές πιο αποτελεσματικό από τους ανταγωνιστικούς φυσητήρες καθώς αντλεί έως και 40 τοις εκατό λιγότερους ενισχυτές. Αυτός ο φυσητήρας προστατεύεται από ναυτική ανάφλεξη και έχει ενσωματωμένα πόδια στήριξης που επιτρέπουν την εύκολη κάθετη ή οριζόντια εγκατάσταση. Αυτός ο λευκός φυσητήρας 12 βολτ προορίζεται για χρήση με εύκαμπτο σωλήνα αερισμού εσωτερικής διαμέτρου 3 ιντσών. Τοποθετείται με κουμπώματα #10. Η Attwood Corporation είναι ένας βραβευμένος ηγέτης στη μηχανική, τις δοκιμές και την κατασκευή θαλάσσιων προϊόντων υψηλότερης ποιότητας για περισσότερα από 100 χρόνια. Παρέχουμε ασφαλή και αξιόπιστο φωτισμό, συστήματα καυσίμων, συστήματα νερού, καθίσματα και βάθρα, σκάλες κολύμβησης, προσαρμοσμένες ταπετσαρίες και γενικά αξεσουάρ θαλάσσης που είναι εύκολο να εγκατασταθούν και πληρούν τις κανονιστικές ρυθμίσεις.

Δεν υπάρχουν διαθέσιμες μονάδες
Μην λειτουργείτε σε περιοχή με υψηλή θερμοκρασία πάνω από 160º F (71º C). Προστατεύεται από θαλάσσια ανάφλεξη και έχει ενσωματωμένα πόδια στήριξης για εύκολη κάθετη ή οριζόντια εγκατάσταση. Έως και τέσσερις φορές πιο αποδοτικοί από τους ανταγωνιστικούς φυσητήρες καθώς αντλεί έως και 40 τοις εκατό λιγότερους ενισχυτές. Η ροή αέρα του συστήματος υπερβαίνει τους εν σειρά φυσητήρες παλαιότερου τύπου έως και 25%. Η σάρωση και το βήμα της λεπίδας έχουν σχεδιαστεί για υψηλό συντελεστή ανύψωσης, με αποτέλεσμα αυξημένη ταχύτητα ροής αέρα για βελτιστοποιημένο αερισμό. Διαθέτει πατενταρισμένη, εν σειρά σχεδίαση και ο ανεμιστήρας 5 λεπίδων μεγιστοποιεί τη ροή αέρα και την απόδοση. Παρέχει εξαιρετική ροή αέρα εξαερισμού για χώρους όπως διαμερίσματα κινητήρα, μαγειρεία, υδροσυλλέκτες και κεφαλές.
Brand Attwood
Brand ‎Attwood
Brand Name ‎Attwood
Color Unspecified
Color ‎Unspecified
Customer Reviews 4.6 4.6 out of 5 stars 539 ratings 4.6 out of 5 stars
Included Components End Product & Information
Included Components ‎End Product & Information
Item Dimensions LxWxH 11.75 x 11.5 x 5.75 inches
Item Dimensions LxWxH ‎11.75 x 11.5 x 5.75 inches
Item Package Dimensions L x W x H ‎10.35 x 5.24 x 3.86 inches
Item Weight 0.01 Ounces
Item Weight ‎0.01 Ounces
Manufacturer ‎Attwood
Material Other
Material ‎Other
Model Name Attwood Boating Tools
Model Name ‎Attwood Boating Tools
Number of Items ‎1
Package Weight ‎0.39 Kilograms
Part Number ‎1731-4
Size ‎One Size
Sport Type ‎Boating
Suggested Users ‎Unisex-adult

3.6

13 Review
5 Star
76
4 Star
14
3 Star
6
2 Star
1
1 Star
3

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: Buffalo Bill
Came as advertised
Replaced the old one and works as advertised.
Scritto da: Christopher
Decent product
I’m using this fan to vent the fume from my 3D printer. I made a fumigation hood. The fan is small and works well it’s very loud. I honestly didn’t expect it to be as loud as it is and for how loud it is, I’d expect it to work a little more efficiently. Honestly it does what I paid for it to do.
Scritto da: Jerome Mcnutt
Great product.
Easy to install
Scritto da: JW
Unit plows/sucks with a lot of volume!
Great operation but pretty loud.
Scritto da: rey balam prieto
Excelente
Muy buen producto recomendado al 100%
Scritto da: Jon Wood
Used inside X3 Max UTV inlet air ducts to suck in more cold air into the housing CVT belt ...
Used inside X3 Max UTV inlet air ducts to suck in more cold air into the housing CVT belt area to help keep the Temperature down on the belt. It really is the best choice. Need to trim off a Arm and buy a rubber reduce4re to make it work and fit snuf into the 3" INCH INLET OF THE X3 Maverick Can Am. What a difference from my venting tubes compared to stock with No CFM except the rotation of the Secoundary & Primarry. CFM 170+ AWESOME . The 4 Inch is too big I wish I could use the 4" with 270 CFM. The 3 inch is working great. Keep the belt way cool.. Happy Trails. Arizona Rider + Dunner.
Scritto da: Mark
Loud but can be fixed with speed controller (link in my review)
Firstly, I did not purchase this for use in a boat I purchased it for use as an exhaust blower for a diy humidifier I made for a grow tent. It blows way to hard for that purpose but after buying- HiLetgo 12V~40V 10A PWM DC Motor Speed Control Switch Controller Voltage Regulator Dimmer for Arduino- that totally solved the issue, great fan, powerful should you need it but it does work with the variable control knob I bought a d fashioned onto it perfectly, will be buying again.
Scritto da: bikertorq
works on a sxs
I bought this blower to push extra air through my cvt transmission in my side by side. it works as expected and helps cool the cvt. The most improvement i observed was at low engine RPMs. i will update if it fails quickly.
Scritto da: brad mac intosh
quiet little unit
This blower fit well...installation was easy and it is much quieter than my original..very satisfied with this product.
Scritto da: Gordon Michael
Powerful blower
Easy to install and quite powerful.
Scritto da: Barry Tanner
Very quiet
Good and quiet
Scritto da: Barnacle
Quality product, prompt delivery.
Bought this bilge blower to replace a squirrel cage blower that was taking up a lot of room in my 19 ft day cruiser ( 4.3 ltr. MCM I/O). The inline blower provided mounting location options while the squirrel cage unit could only be mounted at the discharge port. Seems to have lots of power and I expect it will last for years and be easily replaceable.
Scritto da: Bob pigeau
Simply abs adp fit
Install as cooling fan for cat sxs

Σχετικά προϊόντα

hot
Sierra International FS40750, Bus Bar
3.4/5

€ 58.12

Sierra International FS40750, Bus Bar
3.4/5

€ 58.12

hot
Weaver Leather Steel Y Piece, Blower Part
0.1/5

€ 136.67

Weaver Leather Steel Y Piece, Blower Part
0.1/5

€ 136.67

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array