Ατσάλινο οριζόντιο πιάτο και Olympic Bar Rack Organizer με ατσάλινο πλαίσιο και ρόδες μεταφοράς STB-0130, καφέ

Brand:Steelbody

3.7/5

273.25

Το μεγαλύτερο δεν είναι πάντα καλύτερο, ειδικά όταν πρόκειται για τη διαχείριση του χώρου στο γυμναστήριό σας. Αν δυσκολεύεστε να κρατήσετε όλες τις πολύτιμες πλάκες ανύψωσης στη θέση τους, τότε ήρθε η ώρα να αποκτήσετε το Steelbody Horizontal Plate Rack! Η άντληση σιδήρου είναι διαφορετική για τον καθένα και η προσαρμογή των βαρών είναι απαραίτητη για να αξιοποιήσετε στο έπακρο κάθε προπόνηση. Ωστόσο, μπορεί να είναι δύσκολο να αλλάζετε πιάτα για κάθε διαφορετικό πρόγραμμα προπόνησης. Το Steelbody Plate Rack κρατά όλα τα βάρη σας κοντά με το σκληρό ατσάλινο πλαίσιο με τους ενσωματωμένους τροχούς και τη λαβή για απρόσκοπτη μεταφορά. Ένα φινίρισμα με επίστρωση πούδρας κάνει αυτό το ράφι ανθεκτικό στον ιδρώτα και το νερό, το οποίο βοηθά στην αποφυγή της συσσώρευσης σκουριάς για μακροχρόνια χρήση. Ο σχεδιασμός εμπορικού στυλ διατίθεται σε χαμηλό προφίλ για εύκολη πρόσβαση σε πλάκες βάρους. Με μέγιστη χωρητικότητα βάρους 300 λίβρες, η οριζόντια σχάρα πλάκας μπορεί να χωρέσει πλάκες και ράβδους βάρους ολυμπιακών διαστάσεων με κάθε διαχωριστικό σε απόσταση 6 ιντσών μεταξύ τους. Είτε πρόκειται για το γυμναστήριο του σπιτιού σας είτε για επαγγελματική χρήση, το Steelbody Horizontal Plate Rack διευκολύνει την οργάνωση των βαρών σας, επιτρέποντάς σας να εστιάσετε στην άρση βαρέων βαρών! Με το ανθεκτικό ατσάλινο σκελετό του, αυτό το πλατό δέντρο σας προσφέρει εξαιρετική αξία για τα χρήματά σας.

Εταιρεία με έδρα τις ΗΠΑ με ομάδα εξυπηρέτησης πελατών εδώ για να σας βοηθήσει με οποιεσδήποτε ερωτήσεις μπορεί να έχετε. Με την εγγύηση κατασκευαστή Marcy, μπορείτε να είστε σίγουροι ότι λαμβάνετε την καλύτερη εξυπηρέτηση στον κλάδο. Είτε πρόκειται για ανταλλακτικό είτε για ερώτηση σχετικά με την εγκατάσταση, είμαστε εδώ για να σας βοηθήσουμε. ΜΕΓΑΛΗ ΑΞΙΑ - Ολοκληρώστε το γυμναστήριό σας με αυτό το ράφι βαρών. Με συνολικές διαστάσεις 40,5L x 11,5W x 10H ίντσες, βοηθά στην οργάνωση όλων των ανυψωτικών πλακών σας με σχεδιασμό χαμηλού προφίλ που είναι στιβαρό και ανθεκτικό. ΦΟΡΗΤΟ ΒΑΡΗ ΟΡΓΑΝΙΣΤΗ – Αυτή η σχάρα μπορεί να χωρέσει έως και 300 λίβρες. των βαρών. ΠΟΛΥΛΟΓΟΣ – Αυτή η σχάρα μπορεί να φιλοξενήσει πλάκες βάρους ολυμπιακών διαστάσεων και δύο ράβδους ανύψωσης Ολυμπιακών Αγώνων, δίνοντάς σας την ελευθερία να αλλάζετε γρήγορα μεταξύ των πιάτων. Ο σχεδιασμός χαμηλού προφίλ διευκολύνει τη χρήση για παραγωγικές προπονήσεις. ΕΥΚΟΛΗ ΜΕΤΑΦΟΡΑ – Οι ενσωματωμένοι τροχοί αυτής της σχάρας επιτρέπουν τη μεταφορά χωρίς προβλήματα στο σπίτι ή στο γυμναστήριο, εξαλείφοντας την ανάγκη για κουραστική ανύψωση.
Brand Steelbody
Brand ‎Steelbody
Brand Name ‎Steelbody
Color ‎brown
Customer Reviews 4.7 4.7 out of 5 stars 1,552 ratings 4.7 out of 5 stars
Frame Type ‎Steel
Included Components ‎Warranty card, one weight plate storage with bar rack, User manual
Item Dimensions LxWxH 40.5 x 11.5 x 10 inches
Item Dimensions LxWxH ‎40.5 x 11.5 x 10 inches
Item Package Dimensions L x W x H ‎36.2 x 12.4 x 10.9 inches
Item Weight 23 Pounds
Item Weight ‎23 Pounds
Manufacturer ‎IMPEX
Material Alloy Steel
Material ‎Alloy Steel
Model Name ‎STB-0130
Model Year ‎2007
Number of Racks ‎4
Package Weight ‎11.84 Kilograms
Part Number ‎STB-0130
Product Dimensions ‎40.5"D x 11.5"W x 10"H
Size ‎41”L x 11”W x 9.5”H
Sport Type ‎Exercise & Fitness
Style Bumper Plate Rack
Style ‎Bumper Plate Rack
Suggested Users ‎Unisex-Adult
Warranty Description ‎2 year manufacturer warranty
Weight Limit ‎300 Pounds

3.7

13 Review
5 Star
81
4 Star
12
3 Star
3
2 Star
2
1 Star
2

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: Jonathan G. Wares
Only works for very large weights - though modifiable for smaller (older; ex., Weider brand) weights
Accommodation of smaller sized (ex., traditional Weider brand metal weights) is done by adding two (2) struts, each having one (1) thru-hole (see photo). Although the handle bar holes are utilized (forgoing use of the handle), no alteration of the original plate rack needed. With disassembly of the struts, rack assembly with handle is still an option available when rolling transport movement is necessary.
Scritto da: MJ
Great
Great weight rack for good value!
Scritto da: Kelsie Bailey
Completely satisfied
Useful & easy to move. I have a home gym with multiple bars, plates, and bummer plates. It is identical to numerous racks in professional gyms.
Scritto da: Teresa
Commercial gym level product
This is the perfect plate rack for the floor. It’s sturdy and made of high quality metal. I might get another one. For me this was a good solution since I didn’t want it to take up much space.
Scritto da: Big Red
Bullet proof, just not a tower
While I must say I would love love love a tower, I prefer this. I mean what’s not to love, it’s easy to move around, gets the job done and organizable. Plus did I mention bomb proof?
Scritto da: JD
Meets expectations.
On time delivery, easy to assemble (it's just the handle to add). Wheel mobility isn't as good as some higher-end products with the in-line skate type wheels but not expecting to have to move it around too much. Bought for a simple storage solution for set of bumper plates, perfect capacity for our home gym use. Not over the top, but neither was the price.
Scritto da: Mike Blay
Missing nut to balance stand..
This unit came with 1 rubber base screwed on and the other was off and the nut was no where in the box. Pretty frustrating because the unit is now unstable..
Scritto da: Michael Winczuk
Very sturdy
I use this for my bumper plates and curl bars. I love that it has wheels and is strong. My home gym is a bit cramped so ot helps to be able to move this around. I love it
Scritto da: Alex
Highly Recommended. Works perfectly with my equipment.
Unlike some other reviews (here and many on US site), my 2x45lbs bumpers fit perfectly in the last slot furthest from the handle, not tight at all, with wiggle room to easily add and remove the plates. So fitting my smaller plates is a non-issue. In total, it easily holds my set of 2x45, 2x35, 2x25, 4X10, with no mixing of sizes to get them to fit. I have bumpers by Northern Lights so the fit may vary depending on your plate models. The 2 bar holders are a nice bonus, holding both my straight and EZ curl bar. It's solidly built as well and the handle assembles easily. For the price and function I think this is an excellent value and perfectly fits my needs. Also you don't realize the energy wasted moving, bending, and lifting plates all over the floor to access what you need. Lovely to get that stuff off the floor. It makes changing plates a breeze so you can focus on your workout and actually use your rest time between sets to rest.
Scritto da: Charity
Great and affordably plate storage
I've had this for two lockdowns now. (Going into our third.) Very easy to put together. It fits all my plates and could fit more. My 45s (comp plates) fit in one partition, 35s in another, and 25s in another. Both my 10s and 15s (bumper plates) fit in the last slot. There would likely be enough room for 10s in with the 25s as well. Perfect fit for what I have. People talk about the handle moving when you lift it. Not sure what the point would be to lift it while it's loaded.
Scritto da: AliSays
Great plate rack!!
Using this rack for my home gym equipment, I have all cast iron plates (plus one set of bumpers) so I am a little more careful about loading them onto this steel rack (avoiding chipping as much as possible). I do wish this rack had a rubber or vinyl coating so it would protect the cast iron plates more, but overall love how organized this makes my space. I can keep my barbells off the floor and out of the squat rack and all the plates are in one spot, making life easy when I need to load it all onto the bar. Definitely recommend for home gym equipment!
Scritto da: Melo
Solid weight rack - heavy duty
Impressed by this weight rack, it is heavy-duty and holds a lot. I have 355 pounds loaded onto it (bars included) and it feels solid. One slot can hold three 25# plates. Assembly was easy (just had to attach the handle), and the bar holders hold both 35 and 45. Highly recommend.
Scritto da: RCL
Works as intended
What can I say, others have said that their weights do not fit (2 side by side) I have steel plates and the 45 and 50lbs fit with room to spare (side by side) Not sure how thick your plates are that don't fit but I had absolutely no issue. Bar holder a nice bonus

Σχετικά προϊόντα

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array