AmpFlow M27-150 Brushed Electric Motor, 150W, 12V, 24V or 36 VDC, 3800 RPM

Brand:AmpFlow

2.8/5

103.13

Ο κινητήρας AmpFlow M27-150 έχει σχεδιαστεί για να προσφέρει καλή απόδοση και απόδοση σε οικονομική τιμή. Αυτό επιτυγχάνεται με τη χρήση τεσσάρων βουρτσών και προηγμένης ηλεκτρομαγνητικής μοντελοποίησης και σχεδίασης υπολογιστή. Ο κινητήρας έχει διάμετρο 2,7 ίντσες και μήκος 3,9 ίντσες. Ο άξονας κινείται σε δύο ρουλεμάν υψηλής ποιότητας. Τα καλώδια κινητήρα βαρέως διαμετρήματος έχουν μήκος 12 ίντσες. Ο κινητήρας ζυγίζει 3,0 λίβρες και είναι φινιρισμένος με μαύρη βαφή πούδρας. Αυτός ο αναστρέψιμος κινητήρας μπορεί να χρησιμοποιηθεί σε τάσεις που κυμαίνονται από 12V έως 36VDC. Στα 24 Volt, η ταχύτητα χωρίς φορτίο είναι 3800 RPM. Η ονομαστική ισχύς εξόδου είναι 150 W στις 2800 RPM στα 9 Amps. Η μέγιστη απόδοση είναι 79%. Αυτός ο κινητήρας παρέχεται με γρανάζι 11 δοντιών για αλυσίδα κυλίνδρων #25. Οι κινητήρες AmpFlow® χρησιμοποιούνται σε διάφορες εφαρμογές, όπως ρομπότ, ηλεκτρικά σκούτερ, ηλεκτρικά ποδήλατα και άλλα συστήματα προσωπικής μεταφοράς. Αναζητήστε στο Amazon για κινητήρες AmpFlow για περισσότερες επιλογές.

Παρέχεται με γρανάζι 11 δοντιών για αλυσίδα #25. Μέγιστη απόδοση στα 24V: 79%. Συνεχής ισχύς: 150 watt (1/5 ίππους). Σ.α.λ. χωρίς φορτίο: 3800 στα 24 βολτ. Μπορεί να χρησιμοποιηθεί με τάσεις που κυμαίνονται από 12V έως 36VDC. Έχει διάμετρο 2,7 ίντσες (68 mm) επί 3,9 ίντσες μήκος (99 mm).
Brand AmpFlow
Country of Origin USA
Horsepower 150 Watts
Item model number M27-150
Item Weight 3 Pounds
Manufacturer AmpFlow
Package Dimensions 6.6 x 4.4 x 4.4 inches; 3 Pounds
Speed 3800 RPM
Voltage 24 Volts, 12 Volts

2.8

5 Review
5 Star
48
4 Star
11
3 Star
11
2 Star
30
1 Star
0

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: Lorenzo Gonzalez
Good motor if you know what you need.
I work this thing pretty hard, driven by a Dimension Engineering "Sabertooth" motor controller. It whips a moving target system back and forth across 60 feet of cable very nicely and rapidly indeed, especially at 24V. I fashioned a very simple mount by drilling and milling a 4"-long piece of 1-1/2" x 1/8" L-angle aluminum (available at any good hardware store in 36" lengths and easy to cut with hacksaw, cordless drill, dremel, if you don't have a mill). Only two of the faceplate screws (#8 machine screws, if I recall correctly) go into the mount, but it's plenty.
Scritto da: chinatwanger
This could all be easily eliminated if they just turned a step in the ...
A cheap motor for cheap. So OK.Be careful taking off the sprocket... The threads on the motor shaft are LEFT-Handed (as they should be). So if you over tighten the shaft nut it will force the shaft bearing (inside the motor) down onto the armature coil. Then to get the motor to work again you'll have to try and pull that bearing off the coils and back into position. This could all be easily eliminated if they just turned a step in the shaft instead of using a collar under the sprocket. That would keep this from happening. But the motor works and was cheap so I can live with it.
Scritto da: Linhking
It's working well, but not very good.
I use it for my project handle a windmill turbine, it got hot to much after 30', I don't know how long it's alive if hot to much. with #25 chain not fit for normal teeth pulley, so take a lot of personal technical to make it working the way I need.
Scritto da: Zaen Q.
exactly what i expected
amazing generator, fairly free moving. Will definitely look to purchase the 300W dc motor soon.
Scritto da: jose
Five Stars
Ver y good

Σχετικά προϊόντα

hot
Packard Draft Inducers 115 Volts 3300 RPM
3.4/5

€ 229.16

Packard Draft Inducers 115 Volts 3300 RPM
3.4/5

€ 229.16

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array