Υποστήριξη κάμψης Highcraft PXBND12-10 PEX 1/2 ίντσες, Κρεμάστρα σωλήνα σωλήνωσης τοίχου 90 μοιρών με πλάκα καρφιών, πολυαιθυλένιο (10 πακέτο), μαύρο 1/2 ίντσες.

Brand:Highcraft

3.5/5

56.53

✔Η ΕΠΑΝΑΣΤΑΣΗ PEX: Το PEX είναι η προτιμώμενη επιλογή για Εφαρμογές Παροχής Νερού και Υδρικής Θέρμανσης, με μειωμένο κόστος, ταχύτερη εγκατάσταση, ευελιξία, ανθεκτικότητα, αντίσταση στο πάγωμα και αντοχή στη διάβρωση! !. ✔ΔΙΑΣΤΑΣΕΙΣ: 5 ίντσες Μακρύ, χωράει 1/2 ίντσες Σωλήνας PEX, με πλάκα καρφιών με 2 προ-τρυπημένες τρύπες (Δεν περιλαμβάνονται τα καρφιά). ✔ΛΕΙΑ ΠΛΑΣΤΙΚΗ ΚΑΤΑΣΚΕΥΗ: Μειώνει τον θόρυβο, τους κραδασμούς, τις τσακίσεις, την υπερβολική κάμψη και τον περιορισμό της ροής του νερού. ✔ ΕΥΚΟΛΗ ΕΓΚΑΤΑΣΤΑΣΗ: Μειώστε σημαντικά το κόστος εργασίας με αυτήν την υποστήριξη γωνίας PEX υψηλής απόδοσης. Δεν απαιτούνται εργαλεία, συγκόλληση ή πτύχωση. Απλώς καρφώνετε την πλάκα στερέωσης στην επιφάνεια (προ-ανοιχτές τρύπες για μεγαλύτερη ευκολία) και κάντε κλικ στη σωλήνωση PEX στο εξάρτημα. Είναι τόσο εύκολο όσο αυτό! Μπορεί να αφαιρεθεί και να επαναχρησιμοποιηθεί πολλές φορές. ✔ ΥΠΕΡ ΑΣΦΑΛΗ ΠΡΟΣΑΡΜΟΓΗ PEX HANGER: Παρέχει άκαμπτη υποστήριξη κάμψης 90° για σωλήνες PEX που τρέχουν δίπλα στον τοίχο ή τη δοκό.

✔Η ΕΠΑΝΑΣΤΑΣΗ PEX: Το PEX είναι η προτιμώμενη επιλογή για Εφαρμογές Παροχής Νερού και Υδρικής Θέρμανσης, με μειωμένο κόστος, ταχύτερη εγκατάσταση, ευελιξία, ανθεκτικότητα, αντίσταση στο πάγωμα και αντοχή στη διάβρωση! !. ✔ΔΙΑΣΤΑΣΕΙΣ: 5 ίντσες Μακρύ, χωράει 1/2 ίντσες Σωλήνας PEX, με πλάκα καρφιών με 2 προ-τρυπημένες τρύπες (Δεν περιλαμβάνονται τα καρφιά). ✔ΛΕΙΑ ΠΛΑΣΤΙΚΗ ΚΑΤΑΣΚΕΥΗ: Μειώνει τον θόρυβο, τους κραδασμούς, τις τσακίσεις, την υπερβολική κάμψη και τον περιορισμό της ροής του νερού. ✔ ΕΥΚΟΛΗ ΕΓΚΑΤΑΣΤΑΣΗ: Μειώστε σημαντικά το κόστος εργασίας με αυτήν την υποστήριξη γωνίας PEX υψηλής απόδοσης. Δεν απαιτούνται εργαλεία, συγκόλληση ή πτύχωση. Απλώς καρφώνετε την πλάκα στερέωσης στην επιφάνεια (προ-ανοιχτές τρύπες για μεγαλύτερη ευκολία) και κάντε κλικ στη σωλήνωση PEX στο εξάρτημα. Είναι τόσο εύκολο όσο αυτό! Μπορεί να αφαιρεθεί και να επαναχρησιμοποιηθεί πολλές φορές. ✔ ΥΠΕΡ ΑΣΦΑΛΗ ΠΡΟΣΑΡΜΟΓΗ PEX HANGER: Παρέχει άκαμπτη υποστήριξη κάμψης 90° για σωλήνες PEX που τρέχουν δίπλα στον τοίχο ή τη δοκό.
Batteries Required? ‎No
Color ‎Black
Country of Origin ‎China
Customer Reviews 4.5 4.5 out of 5 stars 278 ratings 4.5 out of 5 stars
Item model number ‎PXBND12-10
Item Package Quantity ‎1
Item Weight ‎6.7 ounces
Manufacturer ‎Highcraft
Part Number ‎PXBND12-10
Product Dimensions ‎5 x 0.5 x 0.5 inches
Size ‎1/2 in.

3.5

10 Review
5 Star
70
4 Star
15
3 Star
9
2 Star
3
1 Star
2

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: Xerocool
perfect
no fails or issues. works as it should
Scritto da: Stephen P. Berzins
Not as pictured. What I received was like most of the her ones, attachment inside the bend.
Worked fine, but ordered this 10 pack instead of just two I needed only because I wanted the different attachment point, on top, not under the the bend. But, in the end they worked just fine
Scritto da: DustStorm
3/4 inch PEX is very, very, very, very, very, very, very hard to bend 90 degrees!
Obviously, most important part of using these supports is to be able to bend the PEX piping. It seems that everyone who deals with PEX espouses the virtues of its flexibility, which of course is true. But, working by myself, I found the reality of bending ¾” PEX to a 90° angle virtually impossible. I gave up, found that I could make due with less sharp turns. (I give 5 stars because I couldn’t use the supports! Returned.)
Scritto da: Bugs
Considering how easy this break, you may want to be sure you order some extras
Maybe its that were a little bit stronger than they are, but it did surprise me when the second one snapped. Get extras so you’re not stuck without finishing your work.
Scritto da: Michael Maddux
These are needed
These work well for molding pex into a turn. The pex is flexible but it has a memory and try to return to its original shape. These hold it into shape even if you need to make a turn without needing to secure it.
Scritto da: WilliamB
Good if you add a little heat and aren't rough.
Broke the first one trying to make a bend on pex at about 68F. I used a heat gun to gently warm the pex and was able to get 4 on without much issue. It was critical to hold the pipe at the 90° angle until it cooled a little or it would extend to around 110°. Not bad, but not at strong as the metal ones from sharkbite. The mounting holes worked well.
Scritto da: PigPen4x4
Not rigid...
Whether these are good or not depends on your expectations. I needed a pretty tight bend and the metal style would hold this very well. These being plastic, have some give so the bend is more like 75-80 degrees (I dunno, didn't measure) rather than 90. Many places these will be OK, others not so much.
Scritto da: Wayne Richardson
Weak plastics
I purchased 1 pack of 10 and started to install them. The first two installed properly, the next two snapped when I was trying to insert the pipe. These plastic supports don't give much support, and snap too easily. I will not purchase again.
Scritto da: Robert Marin
Light and snap well
I had a few break on me
Scritto da: KM Purcell
They seem to make a bit too small of a circle. But I am sure it will work fine.
It is very sharp on the edges. I have to learn how to use properly. It can mark up or scratch the pex very easily. But I have never used this type. So, I'm a newbie..

Σχετικά προϊόντα

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array