0
0

Σύνολο:€ 0.00

Δείτε καλάθιΟλοκλήρωση αγοράς
LoginRegister
0

Σύνολο:€ 0.00

Δείτε καλάθιΟλοκλήρωση αγοράς
LoginRegister

Yost Vises ADI-8 Heavy Duty Vise

Brand:Yost Vises

3.5/5

€
956.36

Αυτή η μέγγενη είναι μια μέγγενη πάγκου εργασίας επαγγελματικής ποιότητας κατασκευασμένη από ολκή σίδηρο. Διαθέτει περιστρεφόμενη βάση για κινητικότητα με δύο κλειδώματα για σφιχτό κράτημα και ρυθμιζόμενες ράγες οδήγησης για ομαλή λειτουργία. Η Yost Vises παράγει υψηλής ποιότητας μέγγπες και αξεσουάρ μέγγενης από το 1908. Προμηθεύουμε τα προϊόντα μας τόσο σε μεγάλους διανομείς όσο και σε μεμονωμένους τεχνίτες σε όλο τον κόσμο, από μέγγγες βιομηχανικής ποιότητας, επαγγελματικού τύπου μέγγενες, μέγγγες εργαστηρίου, ελαφριές έως βαριές μέγγενες εργασίας, μέγγενες πολλαπλών λειτουργιών, μέγγενες συγκόλλησης κ.λπ. Τα προϊόντα μας πληρούν ή υπερβαίνουν το βιομηχανικό πρότυπο της ομοσπονδιακής προδιαγραφής GGG-V-410A, παρέχοντας στους καταναλωτές προϊόντα ποιότητας που διαρκούν για χρόνια σε εξαιρετική τιμή.

Ποσό
Προσθήκη στο καλάθιΑγορασε τωρα

EAN: 0789755000540

Κατηγορίες Βιομηχανικά & Επιστημονικά, Εργαλεία & Είδη οικιακής βελτίωσης, Εργαλεία ισχύος & χειρός, Εργαλεία χειρός, Εργαλεία συγκράτησης, Σφιγκτήρες, Σφιγκτήρες πάγκου,

ΕΓΓΥΗΣΗ: Συνοδεύεται από περιορισμένη εγγύηση διάρκειας ζωής και επιστροφή 90 ημερών. ΠΛΗΡΟΦΟΡΙΕΣ ΑΣΦΑΛΕΙΑΣ: Η κακή χρήση μέγκων μπορεί να προκαλέσει σοβαρό τραυματισμό στα μάτια, στα χέρια και σε άλλα μέρη του σώματος. Οι μέγγενες πρέπει να τοποθετούνται και να χρησιμοποιούνται σωστά. Πριν από τη ρύθμιση και τη χρήση, διαβάστε, κατανοήστε και ακολουθήστε όλες τις οδηγίες που περιγράφονται στο εγχειρίδιο. ΠΟΙΟΤΗΤΑ YOST Vises: Κάθε εργαλείο Yost Vises έχει σχεδιαστεί για να έχει υψηλά πρότυπα ποιότητας, αντοχής και ανθεκτικότητας. Εκτιμούμε την ποιότητα σε σχέση με την ποσότητα και κατασκευάζουμε προϊόντα που είναι ασφαλή και εύκολα στη χρήση. Προσφέρουμε τεχνική υποστήριξη εφ' όρου ζωής για να υποστηρίξουμε την εγγύηση ποιότητας. ΤΡΟΠΟΣ ΧΡΗΣΗΣ: Βεβαιωθείτε ότι η μέγγενη είναι στερεωμένη με ασφάλεια στον πάγκο εργασίας και ότι η περιστρεφόμενη κλειδαριά βάσης είναι ασφαλισμένη. Ανοίξτε τη μέγγενη περιστρέφοντας τη λαβή της μέγγενης αριστερόστροφα. Τοποθετήστε το αντικείμενο ανάμεσα στις οδοντωτές σιαγόνες. Κλείστε τη μέγγενη περιστρέφοντας τη λαβή της μέγγενης δεξιόστροφα μέχρι να σφίξει το αντικείμενο στις οδοντωτές σιαγόνες, συνεχίστε να σφίγγετε μέχρι να μην μπορείτε πλέον να μετακινήσετε το αντικείμενο. Μην σφίγγετε υπερβολικά γιατί μπορεί να καταστρέψετε το αντικείμενο και ή τη μέγγενη. Όταν ολοκληρώσετε την εργασία στο αντικείμενο, γυρίστε τη λαβή της βίδας αριστερόστροφα για να απελευθερώσετε το αντικείμενο. ΒΑΣΗ ΠΕΡΙΣΤΡΕΦΟΜΕΝΗΣ: Συμπλεκόμενη (με γρανάζι) Περιστρεφόμενη βάση 360 μοιρών με δύο κλειδώματα και βάση ADI με τρεις οπές στερέωσης. Μεγάλη επιφάνεια εργασίας με αμόνι. ΤΕΧΝΙΚΑ ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ: Πλάτος σιαγόνας 8 (20,32 cm), Άνοιγμα σιαγόνων 9,5 (24,13 cm), Βάθος λαιμού 4,5 (11,43 cm), Ελάχιστη χωρητικότητα σωλήνα 0,5 (1,27 cm), Μέγιστη χωρητικότητα σωλήνα 4 (10,16 cm). ΜΕΤΓΓΑΝΑ ΒΑΡΕΩΝ ΚΑΤΑΣΤΑΣΕΩΝ: Η Yost Vises ADI-8 είναι μια μέγγενη πάγκου εργασίας 8 ιντσών επαγγελματικής ποιότητας κατασκευασμένη από όλκιμο σίδηρο 130.000 PSI. Διαθέτει συμπλεκόμενη (με γρανάζι) περιστρεφόμενη βάση 360 μοιρών. Η λαβή, οι κλειδαριές και οι αντικαταστάσιμες οδοντωτές οδοντωτές σιαγόνες από σκληρυμένο χάλυβα και οι σιαγόνες σωλήνων είναι επικαλυμμένες με ψευδάργυρο.
Brand Yost Vises
Color Powder Coat Red
Is Discontinued By Manufacturer No
Item Dimensions LxWxH 24 x 8 x 12 inches
Item model number ADI-8
Item Weight 57 Pounds
Manufacturer Yost Tools
Material 130,000 PSI Tensile Strength Austempered Ductile Iron
Product Dimensions 24 x 8 x 12 inches; 57 Pounds
Style Modern

3.5

8 Review
5 Star
76
4 Star
11
3 Star
3
2 Star
5
1 Star
5

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: David Appleby
ADI-4 fit & finish and installation
ADI-4 - well packed in a sturdy box; paint not chipped, vise not scuffed or dented. Somehow bigger than I thought it would be. For me, I wouldn't want any bigger. The jaws open more than 5" and align well. The vise doesn't have the best paint job ever, but covered where it should be and not covered where it shouldn't be. I didn't see any mechanical imperfections. I took it apart, wiped it down well, and used the base as a template for drilling the holes in my bench. Rotation locks are M10 x 1.5; I added M10 grade 8.8 washers to these. I checked the mounting tabs with one of the rotation lock bolts and liked that size, so I ended up with M10 x 1.5 x 90mm bolts (which is a 17mm head - awfully close to 11/16") to secure my vise. 80mm would have been better, maybe even 75mm, through my 1.75" bench. I used neoprene washers sandwiched by 2" x 3/8" galvanized washers top and bottom, between vise and bench on top. Added M10 grade 8.8 washers under the mounting bolts and above the nuts on the bottom. I took my time to position and clamp the base before I drilled. Remember, you want your fixed jaw either even with or slightly in front of the front edge of your bench so if you need to clamp something that hangs down, it will clear the edge of your bench. I used one of my bolts hunting through my drill index to find a good fit. With the base securely clamped and a sacrificial wood block clamped underneath to eliminate tear out, I drilled the back hole first and ran a bolt through it, then aligned the two front mounting tabs so a line between them is exactly parallel with the front of the bench, clamped again and drilled both front holes. Remember to put rotation lock plate in the base with the bolts in it; it won't quite fit with the mounting plate mounted (gee, how could he know that? ;) ). I greased the top of the base and its mate on the vise itself, the rails, and the main screw. Then I bolted it together and wiped it down. I got by with a little clamp-on vise that really didn't hold well for years because I didn't want to drill holes in my bench. What's the point of a nifty workbench if it doesn't have a vise on it? Now to put her to use.
Scritto da: William N
I like this Yost so much that I will be buying another one soon.
I went through decades of cheap made in China cast iron vices that are weak, sloppy, and prone to fracturing. I never actually had one crack on my but you know what, I wanted some quality. This one is made in Taiwan and is of solid forged steel. Yost is an old respected name. This is a real machinists vise. I overpaid for mine a bit have seen them as low as a hundred but still very happy. For a 4" vice the strength of this vice is incredible. I mounted mine over the lip of my workbench so I can clamp tall objects. So when the vice is closed it overhangs the edge of your bench. Don't quote me but I think the clamping strength of this Yost vice is about 8,000 pounds. It is easy, one finger operation. The first thing I did before ever using is was to remove the waxy, brown Cosmoline type shipping greast from all surfaces of the vice including the main screw underneath. Then I lubed the screw and all sliding surfaces with Magnalube G lube which in my opinion is the finest lubricant grease in existence. All moving or sliding parts were lubed and I also worked in a thin coat on the top anvil surface for corrosion resistance. I have had the vice for six months now and it is centerpiece of my workbench. I am seriously thinking about ordering a second one for the 41" Kobalt 8-drawer tool cart I just bought which in reality is a mobile workbench. I can't say enough about the quality of this vice I use it daily. For example I invert a portable belt sander and clamp it in the vice, turning it into a stationary belt sander. Lately I have been re-soling some favorite shoes I otherwise would through out it is great for clamping them after joining the sole to the shoe. Also the built in pipe clamp set of jaws underneath is great for cutting pipe. There is not play or slop in this mechanism whatsoever and that combined with the literally, one-finger operation makes this vice a joy to use. You would need a 5" vice at least of a lesser brand, and still not as useful as this Yost vice. This is really an industrial quality vice in a 4" size. Surprisingly compact for its power but make no mistake this is still a large vice. One last point maybe the quality of the paint is variable on these but mine looks just fine. I am not looking for a show car paint finish this is a vice. As long as the paint doesn't chip or have unpainted spots or big drippy gobs of paint on it, I am happy. The paint is on there smooth not perfect but more than good enough for the job. Nice looking BRIGHT red color much brighter than the Amazon photo. Highly recommended.
Scritto da: Hurlrules
I purchased this yost ADI-5 vise because fireball tool tested this model along with several others
I purchased this yost ADI-5 vise not only because I wanted a good quality ductile iron type over a cast iron type of vise also because on fireball tools youtube channel he tested this model along with many other brands and this thing proved to be well worth the money also this seller had it marked at a cheaper price due to the distressed box witch they had actually mentioned in there descriptions hyperlink witch was nice there where others at a little bit cheaper but those sellers had no description when clicking on there descriptions hyperlink where this seller did have a description for there's witch was really nice to see anyways the box was not that badly distressed and lastly there was only one of the two rubber rings for the handle to keep it attached to the vise witch was in no way a deal breaker because I intended to replace with metal collars that have set screws anyways
Scritto da: Guillaume Lambany
Sure is a nice vise
Haven't tried many brands of vise but, it is a very smooth vise. The set screws are quite loose tho, might have to loctite-blue them for the setting not to change over time. Jaws were slightly offset when I received the vise but, easily adjusted with the play there was in the two screws that holds the jaws. Now its aligned perfectly. Very happy to be upgrading my previous 4 inch, mastercraft vise, which someone else at work bought, and it was garbage. I think this will make my work much, much easier from now on. Entirely satisfied with the purchase, this seems like a high quality vise to me.
Scritto da: V G
Very good vise for the price
I received the ADI version, which is a direct replacement to their FSV line (which is now discontinued). I contacted the company and they were quick to respond to my question regarding the warranty, which the same as for the FSV series - lifetime warranty on the casting. Everything about this vise is solid. I disassembled it as soon as I got it to grease everything up again nicely. The only negative thing I noticed is that the paint chips off very easily in places and you'll see a lot of paint flakes when you disassemble it. Not a big deal, just coat it with some grease. Others have commented that the jaws did not line up on their units, but I had no issues with mine. Note that there are two black screws on the side which push against a small metal bar inside to adjust the play in the sliding section. Make sure to grease up the rails well and you can turn the screws almost all the way in to reduce the slop to close to zero.
Scritto da: JUAN ORTIZ
Excelente, mejor modelo del que es
No sabía si darle las 4 o 5 estrella al producto ya que el tornillo que se envió es ADI no es FSV, en si el ADI es un modelo más nuevo, costoso y resistente, pero como tal no es acero forjado, me quedaré con el tornillo por qué está muy bien, el hecho de que no de las 5 estrellas es que como tal no es el producto que dice, aunque sea algo mejor, no es lo que dice.
Scritto da: TSG
Whoa! Awesome Vise!
Been using this vise for a few months and damn... Soooo much better then any hardware store brand one's I've bought in the past. Those were all 5'' to 6'' cast iron vises unlike this beast. Forged Steel and the removeable pipe vise on the inside was a nice touch. Everything is solid on it. Recommend for sure! Don't waste money on cast iron no more and just wait for this one to go on sale. Worth every penny!
Scritto da: Amazon Customer
So far, so good
I've been using this vice in my work room for about a year now, after shattering my old cheap cast one. So far, it has taken all the abuse I have thrown at it, and been worth every penny. I was extremely impressed with the packaging, mounting instructions, and overall feel of the vice, right away. No broken English instructions, or cheap pot metal parts. It is well finished, no crude casting, or poor craftsmanship noticeable. My only complaint, if you can call it that, is that the pipe jaws aren't very spread out, so it allows round stock to move a bit when you push on it. That said, I barely use them, and the rest of the vice can't be beat for anywhere close to the price. I would definitely recommend a Yost vice to anyone who wants quality, but can't afford to spend $1000+ on a vice

Σχετικά προϊόντα

hot
Wilton 4550R Αναστρέψιμη μέγγενη πάγκου, πλάτος σιαγόνων 5-1/2, άνοιγμα σιαγόνων 6-3/4 & 10-3/4 (28821)
3.6/5

€ 728.98

Wilton 4550R Αναστρέψιμη μέγγενη πάγκου, πλάτος σιαγόνων 5-1/2, άνοιγμα σιαγόνων 6-3/4 & 10-3/4 (28821)
3.6/5

€ 728.98

hot
Bessey BV-HD40 Heavy Duty Bench Menge, 4 In.
3.5/5

€ 183.41

Bessey BV-HD40 Heavy Duty Bench Menge, 4 In.
3.5/5

€ 183.41

hot
AFF General Duty Περιστρεφόμενη Μέγγενη Πάγκου, 6 Μέγιστο Άνοιγμα, Βάθος Λαιμού 3-1/2, 3942 Περιστρεφόμενη Μέγγενη General Duty 6
2.3/5

€ 663.42

AFF General Duty Περιστρεφόμενη Μέγγενη Πάγκου, 6 Μέγιστο Άνοιγμα, Βάθος Λαιμού 3-1/2, 3942 Περιστρεφόμενη Μέγγενη General Duty 6
2.3/5

€ 663.42

hot
Μέγγενη ξυλουργικής IRWIN, μέγγενη με σφιγκτήρα 3 ιντσών (226303ZR)
3.5/5

€ 91.65

Μέγγενη ξυλουργικής IRWIN, μέγγενη με σφιγκτήρα 3 ιντσών (226303ZR)
3.5/5

€ 91.65

hot
Milescraft 4022 TrackLock - Track Lock Πάγκος Σφιγκτήρας Βάση - Αξεσουάρ σύσφιξης για T-Tracks, Μαύρο Μεταλλικό
3.8/5

€ 45.89

Milescraft 4022 TrackLock - Track Lock Πάγκος Σφιγκτήρας Βάση - Αξεσουάρ σύσφιξης για T-Tracks, Μαύρο Μεταλλικό
3.8/5

€ 45.89

hot
Hot Max 27207 200 Amp Επιχαλκωμένοι σφιγκτήρες φορτιστή μπαταρίας Επιχαλκωμένοι 200 ​​Amp
3.5/5

€ 51.62

Hot Max 27207 200 Amp Επιχαλκωμένοι σφιγκτήρες φορτιστή μπαταρίας Επιχαλκωμένοι 200 ​​Amp
3.5/5

€ 51.62

hot
Yost Vises 650-C Mechanics Vise
3.5/5

€ 598.52

Yost Vises 650-C Mechanics Vise
3.5/5

€ 598.52

hot
Yost Vises UP360 Universal 6 ιντσών κάλυμμα γνάθου σε στιλ πρίσματος
3.6/5

€ 55.99

Yost Vises UP360 Universal 6 ιντσών κάλυμμα γνάθου σε στιλ πρίσματος
3.6/5

€ 55.99

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array

Σύνολο:€ 0.00

Δείτε καλάθιΟλοκλήρωση αγοράς

Κατηγορίες

Όλες οι κατηγορίες
Μενού Κατηγορίες Κοντά Καροτσάκι

Menu