Viair 90001 1/8 Female BSP - 1/4 Male NPT Adapter - 2 Piece

Brand:VIAIR

3.5/5

38.20

Για να γίνει η εγκατάσταση πνευματικών συστημάτων όσο το δυνατόν πιο απλή, η VIAIR προσφέρει μια πλήρη σειρά εξαρτημάτων τοποθέτησης που περιλαμβάνουν κιτ μετεγκατάστασης πηγής αέρα, βαλβίδες ασφαλείας, ζεύκτες και μπουλόνια ταχείας σύνδεσης, βαλβίδες αντεπιστροφής, προσαρμογείς και άλλα.

Κατασκευή από μασίφ ορείχαλκο. Προτείνεται η χρήση ντουλαπιού με νήματα. Δύο εξαρτήματα ανά συσκευασία. Χρησιμοποιείται για υδραυλικές εγκαταστάσεις διαφορικού κλειδώματος αέρα. Προσαρμογή από 1/8 Γυναικείο BSP σε 1/4 Ανδρικό NPT.
Brand VIAIR
Brand ‎VIAIR
Color Silver
Color ‎Silver
Connector Type Adapter
Connector Type ‎Adapter
Country of Origin ‎China
Customer Reviews 4.4 4.4 out of 5 stars 135 ratings 4.4 out of 5 stars
Domestic Shipping Item can be shipped within U.S.
Exterior Brass
Exterior ‎Brass
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 3.1 x 2.1 x 1 inches
Item Dimensions LxWxH ‎3.1 x 2.1 x 1 inches
Item model number ‎90001
Item Weight 0.02 Pounds
Item Weight ‎0.02 Pounds
Item Weight ‎0.32 ounces
Manufacturer ‎Viair
Manufacturer Part Number ‎90001
Material Stainless Steel
Material ‎Stainless Steel
Model ‎90001
Number of Pieces 2
Number of Pieces ‎2
OEM Part Number ‎90001
Product Dimensions ‎3.1 x 2.1 x 1 inches
Size 1/8" x 1/4"
Size ‎1/8" x 1/4"
Thread Type NPT
Thread Type ‎NPT

3.5

13 Review
5 Star
69
4 Star
19
3 Star
4
2 Star
2
1 Star
6

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: Geoffrey White
Quick fix for fitting your Airbrush
Works great and got it a day early. If like myself you bought a iwata air brush with one of those cheap compressors this will make it so your air hose will connect. Only thing I didn't like was the fact that I had to order from the US Amazon instead of the Canadian due to the Canadian one being considered as a add-on item for my order so instead of $15 I had to spend $40 after rush shipping and conversion rates.
Scritto da: Ana Tobon
Fit perfectly
Fit perfectly to connect my 1/8 compressor male fitting to the 1/4 female airbrush hose that came with my Paasche airbrush. You will need Teflon or thread sealant on the compressor side otherwise it will leak.
Scritto da: FunkyLad
Nice adapter for Master airbrush compressor
Didn't necessarily want to buy this product but when I switched from my cheap Master airbrush setup to my Iwata Revolution, the Iwata air hose didn't fit. I was, to say the least, very disappointed. This product served to act as an adapter from my old setup to my new Iwata airbrush. The only problem is that it doesn't fit exactly and you will probably need to use thread seal tape. Overall a good and necessary purchase. Also it is neat that it comes with two of them just in case a problem arises and you need a replacement.
Scritto da: Timothy Barnum
Didn't work for my purpose
I thought this connector would adapt my Master air brush with its 1/8" BSP connector to attach to my 1/4"NPT hose on my compressor. However, there are two kinds of BSP (British) connectors. This one (BSPT) is tapered like the US NPT's. The Master airbrush is a parallel BSP (BSPP) and requires that it be threaded onto a rubber grommet at the bottom. I also got confused as to whether I needed male or female. TCPGlobal has the adapter needed for the Master Airbrush
Scritto da: Amazon Customer
Good quality
Perfect adapter
Scritto da: J.S.
Incorrect Product Image and Description
The product image does not show thread sealant and the description does not mention the threads are coated with a sealant. When I received the fittings they came coated with a red thread sealant and I'm unaware of what it's made of. I wanted to use these brass fittings for a potable water application and now I'm unsure whether the thread sealer is safe for drinkable water use. Also, there are less expensive options on Amazon of the same fitting but show the red thread sealant so if you were looking purely for an air application and didn't care about the sealant, those would have been the less expensive and equally as good choice. I avoided those b/c of the sealant.
Scritto da: Dunkine
Used to convert BSP air brush hose to NPT threads
Exactly what I need to convert my BSP threaded air brush hose to NPT for use with my air compressor. Used in conjunction with: PointZero Airbrush Male-Male Nipple Fitting Hose Coupling 1/8" BSP https://www.amazon.com/dp/B004KNHGY6/ref=cm_cr_ryp_prd_ttl_sol_0
Scritto da: TC
Four Stars
using to adapt to airbrush. too expensive for what you get, but works.
Scritto da: Amazon Customer
works exactly as it should and arrived within a day ...
works exactly as it should and arrived within a day or two. the only thing is that there was a bit of orange around the screw. Not sure if it is rust or the deliberate colouring of it. both pieces had the orange colour and rough texture.
Scritto da: I. Tan
Connected my Pasaache TG-SET Double Action Gravity Feed Airbrush to ...
Connected my Pasaache TG-SET Double Action Gravity Feed Airbrush to the TC20 Air Compressor by TCP Global Group. This is a hard to find and important connector for those who need it. I tried many connectors but they all did not work. This one worked perfectly. I cannot thank you enough.
Scritto da: April R.
Five Stars
Does what it's supposed to. Used it to connect my Paasche airbrush to my compressor.
Scritto da: jean guy pageau
Fast service
Good service and good product.
Scritto da: Mike C.
100%
No issues

Σχετικά προϊόντα

hot
Zurn AG-5 - Air Gap Fitting, Μπλε
0.1/5

€ 104.25

Zurn AG-5 - Air Gap Fitting, Μπλε
0.1/5

€ 104.25

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array