Simpson Strong-Te T18N200FNB 2 18ga 316SS Straight Finish Nails 500ct

Name: Simpson Strong-Te T18N200FNB 2 18ga 316SS Straight Finish Nails 500ct
Brand: Simpson Strong-Tie
SKU: 0744039614974
Price: 79.80 EUR
Availability: InStock

Brand:Simpson Strong-Tie

2.3/5

€
79.80

ΑΠΟ ΤΟΝ ΚΑΤΑΣΚΕΥΑΣΤΗ Simpson Swan Secure T18N200FNB 316 από ανοξείδωτο ατσάλι 18-gauge Brad Nails περιέχουν περισσότερο νικέλιο από ένα συγκρίσιμο συνδετήρα 304SS. Αυτό αυξάνει την προστασία από τη διάβρωση στα πιο σκληρά περιβάλλοντα. Τα καρφιά από ανοξείδωτο χάλυβα Simpson Swan Secure 316 κατασκευάζονται με πολύ υψηλές αντοχές εφελκυσμού από χάλυβα που κυμαίνονται από 125.000 έως 145.000 λίβρες ανά τετραγωνική ίντσα, καθιστώντας τους ηγέτες στον κλάδο. Τα βολικά πακέτα 500 αριθμών είναι ένας οικονομικός τρόπος για να αγοράσετε 316 συνδετήρες από ανοξείδωτο χάλυβα.

Ποσό

Προσθήκη στο καλάθι Αγορασε τωρα

EAN: 0744039614974

Κατηγορίες Βιομηχανικά & Επιστημονικά, Καρφιά, Βίδες & συνδετήρες, Συνδετήρες με σπείρωμα, Καρφιά με στυπιοθλίπτη, Καρφιά για φινίρισμα,

Ταιριάζει σε Bostitch, DeWalt, Hitachi, Paslode, Porter Cable και άλλα συμβατά καρφωτικά brad 18 Gauge. 500 ανά κουτί. Νύχια brad 2 ιντσών 18-Gauge. Ανοξείδωτο ατσάλι 316 για μέγιστη προστασία από τη διάβρωση στα πιο σκληρά περιβάλλοντα.

Batteries Required?	‎No
Customer Reviews	3.3 3.3 out of 5 stars 13 ratings 3.3 out of 5 stars
Finish	‎Type 316 Stainless Steel
Head Style	‎Brad
Is Discontinued By Manufacturer	‎No
Item model number	‎T18N200FNB
Item Package Quantity	‎1
Item Weight	‎6.4 ounces
Manufacturer	‎Simpson Swan Secure
Material	‎Stainless Steel 316
Measurement System	‎Inch
Part Number	‎T18N200FNB
Product Dimensions	‎3.3 x 2.7 x 0.7 inches
Warranty Description	‎Limited warranty, available at www.strongtie.com/limited-warranties.

5 Star

4 Star

3 Star

2 Star

1 Star

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με^*

Η βαθμολογία σας

Scritto da: Albert Felten

Works Fine

They work well. No problems. I used a couple thousand nails. I bought them because I wanted to make sure I did not see any corrosion over time. I probably could have saved money and bought the 304ss. I did not have one jam. I am using a pneumatic Bostitch Smart Point nailer that is a couple years old, but has several projects on it already. I was using 7/8" cedar boards and did not see any splitting. All nails were driven into the wood the same depth (cedar top layer and pressure treated lumber bottom layer). I do not have any complaints.

Scritto da: J. A. Nelson

It could be just me, but I really, really DOUBT IT!

So I have a Old Black and Decker 12 volt cordless nailer that I have used consistently for a few years and it has performed flawlessly using bostich brad nails. So I am starting to do some work that requires stainless steel brads and I purchased these in 2". The B&D shoots these in Bostich steel all day long and with no jambing. I don't even get into my second stick and these things misfire and after clearing the jamb, put a new stick and shoot about 7 nails and another jamb. But this time it screws up my B&D plunger in the gun and it won't finish firing. So I go get a Bostich Air Brad Nailer and these brads jamb it as well constantly but have not bent the plunger yet so buyer beware. This is the first time that this has happened in my guns and I fully blame these nails. As soon as I finish this required project. I will trash the remainder of nails and attempt using another brand of brads if need be in stainless steel. I lost the use of a nice tool and I hope that I can get it repaired because of these nails. 't

Scritto da: Leah

A few jams but over all OKAY nails

A few of the nails jammed in my brad nailer, I haven't had this problem with standard brads so I believe the brand might be the issue. Too soon to tell if they'll stand the test of time but so far they seem good.

Scritto da: Amazon Customer

Five Stars

As expected. Not sure what else to say!

Scritto da: C. Beard

Great for pvc trim

I use these to install pvc trim, other types will turn black or rust then bleed onto the trim. Don't be cheap, buy once, cry once.

Scritto da: Matt Nadalin

Sure their stainless but the cost…?

I bought these before shopping around. $35 ish dollars for 500 nails seemed steep and after buying a pack and needed more I realized these are way way over priced. Found some for $8 at Home Depot for double the amount. Both stainless steel 2” nails.