Πρότυπο εγκατάστασης υλικού συρταριού Amerock TMPDRWR

Brand:Amerock

3.5/5

41.42

Περιλαμβάνει απλές, εύκολες στην εφαρμογή οδηγίες. Καταργεί τις εικασίες από την εγκατάσταση υλικού του ντουλαπιού σας. Για χρήση με όλα τα πόμολα και έλξεις Amerock που κυμαίνονται από 3 ίντσες (76 mm) μεταξύ των κέντρων οπών έως 5-1/16 ίντσες (128 mm) μεταξύ των κέντρων οπών. Απλοποιεί την εγκατάσταση υλικού ντουλαπιού. Πρότυπο εγκατάστασης υλικού ντουλαπιών για συρτάρια.

Περιλαμβάνει απλές, εύκολες στην εφαρμογή οδηγίες. Καταργεί τις εικασίες από την εγκατάσταση υλικού του ντουλαπιού σας. Για χρήση με όλα τα πόμολα και έλξεις Amerock που κυμαίνονται από 3 ίντσες (76 mm) μεταξύ των κέντρων οπών έως 5-1/16 ίντσες (128 mm) μεταξύ των κέντρων οπών. Απλοποιεί την εγκατάσταση υλικού ντουλαπιού. Πρότυπο εγκατάστασης υλικού ντουλαπιών για συρτάρια.
Brand Amerock
Handle Type Knob
Material Plastic
Product Dimensions 7.5"L x 6.75"W
Style Simple

3.5

10 Review
5 Star
72
4 Star
11
3 Star
9
2 Star
3
1 Star
5

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: Kady B
Save your time and spend your money on this
I am a DIYer and this tiny tool has saved me so much time installing polls knobs on drawers and cabinets, etc. This tool is simple and it’s made out of plastic but it gets the job done.
Scritto da: Belal Baydoun
Does not work on the bigger drawers
It’s good for smaller drawers but doesn’t work for bigger drawers
Scritto da: melissa f
Super easy to use
Super easy to use. The other one I already had only had 4 inch hole spacing, so needed to buy one that fit my 5 inch drawer pulls. This worked great and only goes to 5 inches cc, so if you need even larger hole spacing this isn't for you. I will say that the one I had purchased a few years ago from Home Depot (some Liberty brand) had the drill bit included. This one didn't and if you only need up to 4 inch center to center, I would get the Liberty that has a nice sharp drill that's standard for the screws.
Scritto da: Svon
Great for knobs
Inexpensive and worth the piece of mind that my knobs would be straight. This is perfect if you are adding knobs but I’m not sure if it’s the right one to buy for adding vertical pull handles
Scritto da: Private
not very useful
For $3, it was OK. The hole "spread" was correct for my handles, but the tool is so short it only works on very shallow drawers. I put together some spacers to make it work for deeper drawers, but if I had wanted to do all that work, I could have just made a template.
Scritto da: Blue Racer
Contractor liked and used this
Having seen some horror story pictures of other contractors’ erroneously drilled/filled holes, I took fate into my own hands and gave this template to our kitchen remodeler to use along with the new SS handles. He seemed pleased with it and used it on all our new kitchen doors and drawers. End result, perfectly spaced handles and no erroneously drilled and filled holes in our cabinetry. Cheap insurance...
Scritto da: Tony
Perfect match
Perfect match for Amazon basic knobs 3.75 inches. Saved me a lot of time and hassle.
Scritto da: Adam F
A+
Quick and easy to make repetitive marks. Excellent product. Used this to make 12 drawers and well worth getting for such a project.
Scritto da: Nicole
Four Stars
Ideal for a Non professionnel like me
Scritto da: O. T.
Trouble sealing
I have trouble sealing them after using them couple of times. Got them in May, some are already useless since they dont seal anymore.

Σχετικά προϊόντα

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array