0
0

Σύνολο:€ 0.00

Δείτε καλάθιΟλοκλήρωση αγοράς
LoginRegister
0

Σύνολο:€ 0.00

Δείτε καλάθιΟλοκλήρωση αγοράς
LoginRegister

Προϊόντα PC PC-Marine Epoxy Putty, 2oz Stick, White (25567) 2 oz

Brand:PC Products

3.5/5

€
44.00

ΠΕΡΙΓΡΑΦΗ ΠΡΟΪΟΝΤΟΣ Το PC-Marine είναι ένα χυτευόμενο στο χέρι εποξειδικό στόκο σχεδιασμένο για γρήγορες επισκευές έκτακτης ανάγκης. Το PC-Marine έχει σχεδιαστεί για να προσκολλάται σε υγρές, στεγνές και βυθισμένες, υποβρύχιες επιφάνειες που είναι καθαρές. Κόβουμε, ανακατεύουμε και εφαρμόζουμε. Το PC-Marine επιτρέπει χρόνο εργασίας περίπου 15 λεπτών και ωριμάζει για σέρβις σε 60 λεπτά. Το PC-Marine δεν θα κολλήσει με χαρτί κεριού, τεφλόν, πολυαιθυλένιο και ορισμένα άλλα πλαστικά. Υπάρχουν εκατοντάδες χρήσεις σε χιλιάδες συνδυασμούς. Χρησιμοποιείται για τη συγκόλληση οπών σε υαλοβάμβακα, PVC, μέταλλο, σκάφη, σπα, πισίνες, δεξαμενές αποθεμάτων και άλλα. ΑΠΟ ΤΟΝ ΚΑΤΑΣΚΕΥΑΣΤΗ PC-Products, γιορτάζοντας τα 75 χρόνια “Fixing Your Things”, με ποιοτικά, αξιόπιστα προϊόντα επισκευής. Λύσεις επισκευής για σχεδόν οτιδήποτε χρειάζεται επισκευή ή ό,τι καταφέρετε να σπάσετε. Από το σκυρόδεμα μέχρι την αποκατάσταση ξύλου και τις μόνιμες επισκευές βαρέως τύπου, σας έχουμε καλύψει. Ναι. Μπορούμε να το διορθώσουμε

Ποσό
Προσθήκη στο καλάθιΑγορασε τωρα

EAN: 742839406188

Κατηγορίες Βιομηχανικά & Επιστημονικά, Adhesives, Σφραγιστικά & Λιπαντικά, Epoxies, Εποξειδικό κεραμίδι Συγκολλητικά,

Χύτευση στο χέρι χωρίς να χρειάζονται εργαλεία ανάμειξης ή εφαρμογής. Λευκός εποξειδικός στόκος δύο συστατικών για γρήγορες επισκευές θαλάσσιων, πισίνας και υδραυλικών εγκαταστάσεων σε βρεγμένες, στεγνές και υποβρύχιες επιφάνειες. Επισκευή σκαφών, spa, πισίνες, νιπτήρες, δεξαμενές αποθεμάτων, σωλήνες χαλκού και PVC. Θεραπεύει το λευκό. κολλάει σε πλακάκια, υαλοβάμβακα, σκυρόδεμα, gunite, ενέματα, PVC, ξύλο και διάφορα μέταλλα. Εποξειδικό στικ στόκου για γρήγορες επισκευές σε βρεγμένες ή στεγνές επιφάνειες. επιστροφή στην υπηρεσία σε λιγότερο από 60 λεπτά.
Brand PC Products
Color White
Compatible Material Wood, Fiberglass, Plastic, Concrete, Metal
Country of Origin USA
Domestic Shipping Item can be shipped within U.S.
International Shipping This item can be shipped to select countries outside of the U.S.
Is Discontinued By Manufacturer No
Item Form 2oz,Putty,Stick
Item model number 25567
Manufacturer Protective Coating Co.
Material Putty
Product Dimensions 4 x 1.5 x 8.25 inches; 1.6 Ounces

3.5

13 Review
5 Star
72
4 Star
14
3 Star
6
2 Star
4
1 Star
4

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: Ellie d
It does work under water
I use this apoxy in my containers that hold water for fountains and small floating container gardens. It seems to do the job. Have tried a lot of products. This one is the best so far. No leaks.
Scritto da: cynthia
Love this product.
A couple/three years ago, I was looking to repair something that was chipped --- I needed the repair to adhere to the original object. This product was referred to me by a hardware store employee who used it regularly in his side hustle as an artist/sculptor. I've used it in a wide variety of ways ever since --- to repair things and to create things from scratch. Easy to cut off a chunk, knead it into a uniform consistency, and a decent work time. You can even sand it and paint it. I've bought it repeatedly and I love it!
Scritto da: PJ
Excellent product.
Perfect for what it’s designed for.
Scritto da: J. Bruha
Water epoxy
This is epoxy rated for wet use, even underwater. Have used both this and 'water weld'. The water weld is a thick paste, so it stays put where you apply it. This is like thick honey, it will slowly ooze downhill. However, in my opinion, this 'sticks' better than water weld. If you have a situation where it will stay in place, or if you can put on more layers to build up where it oozes thin, I prefer this to the Water Weld. It adheres better, and leaves a smoother surface, so you don't have to sand as much if at all to smoothen it.
Scritto da: Keith
Is best to remove water and let the putty cure
This worked very well for fixing a leak between the toilet tank and bowl. Make sure to have a dry toilet let it cure for an hour or 2 then all set
Scritto da: DaveM
Works but....
Comes in a plastic tube with a cap on the end. Take out the epoxy and it is wrapped with cellophane a green film. I assume you mix the green with the white epoxy. Seems odd to mix green with white, but..... it kinda worked.
Scritto da: T. Ciardullo
USED ON CAR REPAIR, ALUMINUM SIDING AND PORCELAIN TUB
I used this epoxy to fix a stubborn aluminum siding problem. Tried Bondo and other outside products but they never lasted more than a season. The siding is on the hot side of the house and the sun and rain would loosen any fix I tried. It was easy to mold and match the texture of the siding unlike bondo which you have to get right the very first few minutes or forget it. We also have used it to fill in a crease dent on a bumper before painting just to minimize the appearance of the damage. And the original purpose of the stuff was to fix a chip in a white porcelain tub. The only thing that would stay in the chip year after year. The color wasn't a perfect match but a big black chip really looks bad where this stuff was easy to smooth to the tub height and looked better than just painting the chip. Very happy with the product. You can use your fingertip lightly moistened to really get it nice and smooth.
Scritto da: BK
Very easy to use, works like a charm
You literally slice off a piece of the roll about the size of what you need, roll it around with your fingers until the color evens out between the green and the white and apply it. It takes about 15 minutes to set so that you can have the time to work with it. Great for marine uses as its waterproof
Scritto da: Jank
Emergency fix
I dropped the shampoo bottle and the bottle top cracked the bath in an almost perfect circle about the size of a 10p. Not wearing my glasses in the shower I didn't notice and the kitchen ceiling below was soaked. Panicking that the bath was going to have to be replaced and would be out of use until then I googled how to repair and found marine putty. I broke a chunk of and mixed it in my hand, with gloves on because it starts out dk green, I pushed some into the hole from above and pushed some up from below. I used some water on my finger to try to smooth it as much as possible. I waited 24 hours just to be safe and so far it has done the job perfectly. It dried light grey and does show on the white bath but has saved a lot of money and hassle so I will live with it. I still have plenty left if anything else happens but feel confident with the repair.
Scritto da: Neilisforeal
Seems to work.
So far this has held up nicely. I used it to repair a water butt, the tap had come loose at the the thread end and there was no other way to repair it... One cannot reach it from the inside and a new tap was no good as the barrel part had been stripped. I know that patching from the outside is iffy due to adhesion forces required to keep water in is immense and whether it would stick to both the barrel and tap due to the plastic types was a gamble, but it seems too have paid off. Although I've not had a full barrel of water to test it under true pressure, it hasn't leaked at around 1/4 full. It has yet to go through the test of winter frost etc but has held up the last few months. Being solid is a problem as it can't flex with the expansion of the material it's bonded to, so consider that, but it's holding well in this application so far.
Scritto da: Nimbus
Seems to work well
I used this PC Products PC-Marine Mouldable Epoxy Putty to repair a composite birdbath that had cracked. What I like about this putty is that even though you have to mix the putty and hardener it's made easy by the way it's packed. You just cut off a slice of the right size and mix it until the green core is fully mixed with the white exterior to form an off-white ball of putty - then you know it's ready to use. The putty is easy to work with and even on a hot day mine was workable for around 15 minutes. it did take a bit longer than the quoted hour to fully harden and if you can leave it 24 hours my sense is that would be good. I found the surface easy to smooth with fine-grade sandpaper. The resulting repair is waterproof and looks fine, of course, there is the long-term test of longevity but my sense is that this product has worked well in the case of my birdbath. I'm pleased with the end result.
Scritto da: TeenB
Easy to use and worked!
Got a tip off Garden Rescue programme to use this to block up a hole to make a waterfeature - and it worked! I had a very ancient butler style sink in the garden - I did use a yoghurt pot lid in the whole to give the putty something to ‘sit on’ - I really didn’t expect it to be watertight and upped the water level gradually over a few days - still no leaks! - now planted up with a solar fountain in it. Very pleased.
Scritto da: Ryan
DOES NOT BOND TO WET SURFACES!
DOES NOT BOND TO WET SURFACES! Terrible product, the putty slides on wet surfaces and you cannot get an airtight deal with this product. USELESS!

Σχετικά προϊόντα

hot
3M TALC Scotch-Weld Epoxy Adhesive DP100, Διαυγές, άκαμπτο εποξειδικό ταχείας ωρίμανσης δύο μερών, υψηλής αντοχής διάτμησης, υψηλής ροής, χαμηλού ιξώδους, αυτοεπιπεδούμενο, 200 mL (6,76 fl oz) Duo-Pak
4.1/5

€ 127.38

3M TALC Scotch-Weld Epoxy Adhesive DP100, Διαυγές, άκαμπτο εποξειδικό ταχείας ωρίμανσης δύο μερών, υψηλής αντοχής διάτμησης, υψηλής ροής, χαμηλού ιξώδους, αυτοεπιπεδούμενο, 200 mL (6,76 fl oz) Duo-Pak
4.1/5

€ 127.38

hot
Προϊόντα Η/Υ PC-7 Εποξειδική κόλλα κόλλας, βαρέως τύπου δύο μερών, 2 ουγκιές σε δύο βάζα, ανθρακικό γκρι 27776 2 ουγκιές σε δύο βάζα 1
3.5/5

€ 38.34

Προϊόντα Η/Υ PC-7 Εποξειδική κόλλα κόλλας, βαρέως τύπου δύο μερών, 2 ουγκιές σε δύο βάζα, ανθρακικό γκρι 27776 2 ουγκιές σε δύο βάζα 1
3.5/5

€ 38.34

hot
J-B Weld Original Epoxy, Steel Reinforced Epoxy, High Strength - 2 Pack, Dark Grey (8265S-2) 2 oz - 2 pack Epoxy
3.7/5

€ 52.76

J-B Weld Original Epoxy, Steel Reinforced Epoxy, High Strength - 2 Pack, Dark Grey (8265S-2) 2 oz - 2 pack Epoxy
3.7/5

€ 52.76

hot
3M Scotch-Weld Epoxy Adhesive DP125, Grey, Two-Part Epoxy, Versatile Flexible Adhesive, 400 mL (13,52 fl oz) Duo-Pak, 6/Case
0.1/5

€ 408.82

3M Scotch-Weld Epoxy Adhesive DP125, Grey, Two-Part Epoxy, Versatile Flexible Adhesive, 400 mL (13,52 fl oz) Duo-Pak, 6/Case
0.1/5

€ 408.82

hot
VersaChem 47909-12PK Titanium Epoxy System - Σωληνάριο 25 ml, (Συσκευασία των 12) , Γκρι
0.1/5

€ 98.64

VersaChem 47909-12PK Titanium Epoxy System - Σωληνάριο 25 ml, (Συσκευασία των 12) , Γκρι
0.1/5

€ 98.64

hot
Πιστόλι διανομής MG Chemicals για εποξειδικό φυσίγγιο 400 mL 1:1 (8DG-400-1-1)
3.5/5

€ 162.85

Πιστόλι διανομής MG Chemicals για εποξειδικό φυσίγγιο 400 mL 1:1 (8DG-400-1-1)
3.5/5

€ 162.85

hot
PC Products PC-Fast-N EZ Flexible Epoxy Adhesive Paste, 14 ml σε διπλή σύριγγα, ημιδιαφανής 61411
3.2/5

€ 42.88

PC Products PC-Fast-N EZ Flexible Epoxy Adhesive Paste, 14 ml σε διπλή σύριγγα, ημιδιαφανής 61411
3.2/5

€ 42.88

hot
3M TALC Scotch-Weld 87838 Epoxy Adhesive DP190, 200 mL, Translucent, 6.763 fl. ουγκιά.
0.1/5

€ 139.84

3M TALC Scotch-Weld 87838 Epoxy Adhesive DP190, 200 mL, Translucent, 6.763 fl. ουγκιά.
0.1/5

€ 139.84

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array

Σύνολο:€ 0.00

Δείτε καλάθιΟλοκλήρωση αγοράς

Κατηγορίες

Όλες οι κατηγορίες
Μενού Κατηγορίες Κοντά Καροτσάκι

Menu