Pitsco Basic Moousetrap Vehicle Kit (Ατομικό Πακέτο) Για 1 Μαθητή

Brand:Pitsco

3.2/5

74.87

Το κιτ Pitsco Balsa Wood Basic Mousetrap Vehicle παρέχει στους μαθητές των τάξεων 6-12 μια πρακτική δραστηριότητα για να σχεδιάσουν και να κατασκευάσουν ένα μοντέλο αυτοκινήτου που επιδεικνύει επιστημονικές έννοιες όπως η ταχύτητα, η δύναμη, η κίνηση και οι νόμοι της φυσικής του Νεύτωνα και διδάσκει μηχανικό σχεδιασμό. Οι μαθητές μπορούν να κατασκευάσουν το αυτοκίνητο από το κιτ και μπορούν να τροποποιήσουν το αυτοκίνητο για βελτιωμένη απόδοση και μεγαλύτερη ταχύτητα. Το κιτ περιλαμβάνει ποντικοπαγίδα, κομμάτια ξύλου μπάλσα μήκους 12 και 18 ιντσών, συμπαγείς δίσκους κανονικού μεγέθους για τροχούς, αποστάτες τροχών, ροδέλες ώσης, κομμάτια ορειχάλκινου σωλήνα 12 ιντσών, εξαιρετικά λεπτή χορδή και οδηγίες. Τα κιτ Pitsco 57034 (συσκευασία των 10 κιτ) και 57035 (συσκευασία των 30 κιτ) περιλαμβάνουν επίσης ένα αντίγραφο του εγχειριδίου, το Mousetrap Powered Cars and Boats του Doc Fizzix. Το τελικό όχημα έχει διαστάσεις περίπου 4,5 x 5 x 26,5 ίντσες (Υ x Π x Β). (H είναι το ύψος, η κατακόρυφη απόσταση από το χαμηλότερο προς το υψηλότερο σημείο, το W είναι το πλάτος, η οριζόντια απόσταση από τα αριστερά προς τα δεξιά, το D είναι το βάθος, η οριζόντια απόσταση από μπροστά προς τα πίσω.) Ένα κιτ οχήματος ποντικοπαγίδας χρησιμοποιείται συνήθως σε εκπαιδευτικό περιβάλλον για την επίδειξη μηχανικής και φυσικής. Η κατασκευή απαιτεί λευκή κόλλα, χάρακα, μαχαίρι χόμπι, κόφτη καλωδίων και ένα τρυπάνι ή εργαλείο Dremel (όλα πωλούνται χωριστά). Τα προϊόντα επιστημονικής εκπαίδευσης ενσωματώνουν εφαρμοσμένες αρχές μαθηματικών και φυσικών επιστημών σε έργα στην τάξη. Οι δάσκαλοι σε τάξεις προσχολικής ηλικίας, δημοτικού και δευτεροβάθμιας εκπαίδευσης χρησιμοποιούν κιτ και προϊόντα επιστημονικής εκπαίδευσης παράλληλα με το πρόγραμμα σπουδών επιστήμης, τεχνολογίας, μηχανικής και μαθηματικών (STEM) για να επιδείξουν έννοιες STEM και εφαρμογές του πραγματικού κόσμου μέσω πρακτικών δραστηριοτήτων. Τα προγράμματα επιστημονικής εκπαίδευσης περιλαμβάνουν ένα ευρύ φάσμα δραστηριοτήτων, όπως πρακτικά πειράματα στη μηχανική, την αεροναυπηγική, τη ρομποτική, την ενέργεια, τη χημεία, τη φυσική, τη βιολογία και τη γεωλογία. Το Pitsco Education αναπτύσσει πρόγραμμα σπουδών K-12 για τις επιστήμες, την τεχνολογία, τη μηχανική και τα μαθηματικά (STEM) , εκπαιδευτικά κιτ και εργαλεία τάξης. Η εταιρεία, που ιδρύθηκε το 1971, έχει την έδρα της στο Pittsburg, KS. What's in the Box; * Pitsco Balsa Wood Basic Moousetrap Vehicle Kit * Ποντικοπαγίδες (μία ανά αυτοκίνητο) * Ξύλινα κομμάτια Balsa (3 ανά αυτοκίνητο) * Συμπαγείς δίσκοι (4 ανά αυτοκίνητο) * Αποστάτες τροχών (4 ανά αυτοκίνητο) * Ροδέλα (4 ανά αυτοκίνητο) * Σωλήνες ορείχαλκου (2 μήκη ανά αυτοκίνητο) * Εξαιρετικά λεπτή χορδή (1 μήκος ανά αυτοκίνητο) * Ένα εγχειρίδιο, Doc Fizzix's Mousetrap Powered Cars and Boats (10 πακέτα και 30 πακέτα μόνο) * ΟδηγίεςΣημείωση: Οι τροχοί που απεικονίζονται δεν είναι τυπικοί, αλλά αποτελούν παράδειγμα πώς οι μαθητές μπορούν να ζωγραφίσουν και να διακοσμήσουν τα οχήματά τους.

Δεν υπάρχουν διαθέσιμες μονάδες
Το τελικό όχημα έχει διαστάσεις περίπου 4,5 x 5 x 26,5 ίντσες (Υ x Π x Β). Ενισχύει τις έννοιες της τεχνολογίας, της μηχανικής και των μαθηματικών καθώς οι μαθητές τροποποιούν τα αυτοκίνητα με βάση παράγοντες που επηρεάζουν την απόδοση. Εκθέτει τους μαθητές στη διαδικασία σχεδιασμού και τους ενθαρρύνει να πειραματιστούν και να τροποποιήσουν το όχημα για μεγαλύτερη ταχύτητα ή απόσταση. Περιλαμβάνει εξαρτήματα που απαιτούνται για την κατασκευή ενός οχήματος που κινείται από ποντικοπαγίδα για διδασκαλία μηχανικού σχεδιασμού. Το κιτ οχήματος με ξύλινη ποντικοπαγίδα παρέχει στους μαθητές των τάξεων 6-12 μια πρακτική δραστηριότητα για να σχεδιάσουν, να κατασκευάσουν και να τροποποιήσουν ένα μοντέλο αυτοκινήτου που καταδεικνύει τις επιστημονικές έννοιες της ταχύτητας, της δύναμης, της κίνησης και των νόμων της φυσικής του Νεύτωνα.
Age Range (Description) 12+
Brand Pitsco
Country of Origin USA
Customer Reviews 4.1 4.1 out of 5 stars 202 ratings 4.1 out of 5 stars
Domestic Shipping Currently, item can be shipped only within the U.S. and to APO/FPO addresses. For APO/FPO shipments, please check with the manufacturer regarding warranty and support issues.
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer No
Item Dimensions LxWxH 17.9 x 4.6 x 0.4 inches
Item model number BG57033
Item Weight 0.4 Pounds
Item Weight 6.4 ounces
Manufacturer Pitsco
Product Dimensions 17.9 x 4.6 x 0.4 inches
Size For 1 Student

3.2

8 Review
5 Star
59
4 Star
14
3 Star
15
2 Star
4
1 Star
9

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: Britt
Not the wheels in the image
Clear, flimsy wheels came in this kit. I specifically bought this because I thought the wheels were stronger and looked cool. I was extremely disappointed. The kit is way overpriced for what's with it. The car came together ok with some upgraded wheels.
Scritto da: Jonathon D Leszczynski
This kit works, but you can make it much better with some intelligent improvements.
The directions are great and this is a perfect kit to MODIFY for a racer. Skip using the board you see below the mousetrap as one big board. Instead, glue the mousetrap straight to the two side boards (so the car is as wide as the mousetrap) after you cut off a couple more, mousetrap width pieces, from the big board. Use those additional pieces to stiffen up the frame. Use a pipe cutter to trim the axles and get some nylon washers from the hardware store to fit the axles (I used #10 sized.) The nylon washers help you keep the axles straight. If you really have time, you can drill out a bunch of holes to save weight. I also had some wider CD sized wheels that came from the packaging of 100 packs of DVD's, and those wheels easily accepted a wider rubber band to help provide traction to the drive tires. Also, consider a single front wheel over two, if you can manipulate it.
Scritto da: Mellisa Boan
Science Olympiad parent approved
Bought this for Science Olympiad from seeing other parents using this the year prior. Our child signed up for Mousetrap Vehicle AGAIN! We were not thrilled. Year prior we spent countless hours, days, weeks making the perfect mousetrap vehicle. We built around 3 and our kid’s friends parents build 4 or 5. You could imagine the stress this brought to our family. Well when our kids came home and was so happy about signing up for this endeavor again, we were shocked she didn’t remember the pain and anguish from the last year. I quickly bought this and it was PAINLESS and RELAXING. This is easy and fun, the way it should have been the first time. Instructions are kid friendly. Our 10 years did most of the work. Super convenient!
Scritto da: Jerry Stowers
Fun kit to build!
My daughter had this as a school project so we built it and it worked great, it was a science project about force! She painted it too, great fun!
Scritto da: shoppers voice
It worked. Price is a little high for what it is.
I ordered this on two day shipping, and it came on time for a school project. It was missing one of the plastic CDs, so I just used a junk one that I have. The brand for this product is wrong, this is actually a mousetrap car from DocFizzix.com from years ago, I'd assume that they are just re-branding them and selling off left over stock. As for the quality, its okay. The CDs are flimsy and I recommend using real disks for ease of build. Also I found out that it's actually cheaper to buy this off of their store, for like 15 dollars. After I finally managed to throw it together, it performed okay. This thing works best when you have it on longer and flatter surfaces, unlike my test trials (ie. a shorter hallway and on carpet). So, with all of this considered, I give this a 3/5. Is it worth 20 dollars? No, more like 15, or even 10. I also included some images of the build and the package it came in, some of the images may be poor quality so I apologize.
Scritto da: Mark M.
Good enough for 3rd place out of 25.
My daughter ended up with an 87’ run using this kit for a physics class project. Much simpler than trying to do it from scratch. The resulting car is great for a school project. By design it’s not made to be crashed into a fleet of toy trucks by an 8 year old. It did its job at our home and is destined for the trash can during a cleaning project a year from now ;).
Scritto da: Peter M.
A very worthwhile purchase for the curious minded.
The kit was very well made, and I loved the fact that the holes were predrilled. The instructions would be more helpful if it were a little more in dept, as the last steps were very confusing for me. If you by any chance use this kit for Science Olympiad, then you might face problems with the vehicle not fitting into the even parameters, but this issue could be easily fixed with some modifications. All in all, this was an excellent mousetrap vehicle.
Scritto da: James W Thomas
Sucks.
Wheels don’t stay on. Mousetrap spring broke off. Frame has no support. What a disappointment!

Σχετικά προϊόντα

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array