Όρεγκον αλυσοπρίονο Premium Steel Grease Gun 110534

Brand:Oregon

3.6/5

84.85

ΠΕΡΙΓΡΑΦΗ ΠΡΟΪΟΝΤΟΣ Ιδανικό για επαγγελματίες και συχνούς χρήστες, αυτό το πιστόλι γράσου από χάλυβα υψηλής ποιότητας με προσαρμογέα zerk και φυσίγγιο επαναπλήρωσης μειώνει την τριβή και βελτιώνει την απόδοση σε μια ποικιλία εφαρμογών αλυσοπρίονων. Βοηθά στην πρόληψη της πρόωρης φθοράς, ειδικά στις μύτες της ράβδου οδηγών Περιλαμβάνεται αντάπτορας Zerk και μία κασέτα επαναπλήρωσης. Εύκολο στη χρήση, μπορεί να εφαρμοστεί με το ένα χέρι. Πρόσθετες κασέτες επαναπλήρωσης διατίθενται για αγορά ξεχωριστά. Γενικός Όγκος 82,69 in³ Προϊόν UOM Κάθε Βάρος (με συσκευασία) 0,03 Lb ΑΠΟ ΤΟΝ ΚΑΤΑΣΚΕΥΑΣΤΗ Η αλυσίδα κοπής Oregon χρησιμοποιείται ως πρωτότυπος εξοπλισμός από το 90 τοις εκατό των παγκόσμιων κατασκευαστών αλυσοπρίονων και από τους περισσότερους επαγγελματίες υλοτόμους, αγρότες και ιδιοκτήτες σπιτιού στον κόσμο. Γιατί; Επειδή θέλουν τα πριόνια τους να προσφέρουν απαράμιλλη απόδοση κοπής και το υψηλότερο δυνατό επίπεδο ικανοποίησης από το προϊόν. Να τι παρέχει στους χρήστες το Όρεγκον: Προηγμένα υλικά κατασκευής, καινοτόμα χαρακτηριστικά προϊόντων και εξαιρετική ποιότητα που μεγιστοποιεί την υψηλή αξία που είναι ενσωματωμένη στα αλυσοπρίονα, Κοπτική αλυσίδα χωρίς προβλήματα --- που κόβει κάθε τύπο ξυλείας, στέκεται όρθια σε κάθε είδους καιρό και παραμένει μαζί σε όλες τις συνθήκες κοπής, Αλυσίδα κοπής που παραμένει πιο αιχμηρή από όσο περιμένουν ποτέ οι περισσότεροι χρήστες πριονιού, αλλά είναι εύκολο να ακονιστεί ξανά όταν έρθει η ώρα, Αλυσίδα κοπής που κατασκευάζεται σε πολλούς τύπους και μεγέθη για να ταιριάζει με την ισχύ των περισσότερων πριονιών και τα είδη χρήσης για τα οποία έχει σχεδιαστεί κάθε πριόνι, Αλυσίδα κοπής που διαθέτει ενσωματωμένα χαρακτηριστικά ασφαλείας λίπανσης, ακόνισμα, χαμηλών κραδασμών και χαμηλού κλοτσήματος και αλυσίδα κοπής που είναι διαθέσιμη για αντικατάσταση οπουδήποτε στον κόσμο για να διασφαλιστεί το υψηλότερο δυνατό επίπεδο εξυπηρέτησης και υποστήριξης πελατών. Από την ανάπτυξη της πρώτης αλυσίδας θρυμματιστή πριν από περισσότερο από μισό αιώνα, το Όρεγκον ήταν, και παραμένει, στην πρώτη γραμμή της τεχνολογίας συστημάτων κοπής αλυσοπρίονων και συνεχίζει να παράγει την πιο προηγμένη σειρά αλυσίδας κοπής που είναι διαθέσιμη σήμερα. Το πιστόλι γράσου Oregon χρησιμοποιείται για τη μείωση της τριβής και τη βελτίωση της απόδοσης σε μια ποικιλία εφαρμογών αλυσοπρίονων

Αριθμός μοντέλου: 110534. Χώρα προέλευσης: Γερμανία. Βοηθά στην πρόληψη της πρόωρης φθοράς, ειδικά στις μύτες της ράβδου. Επωνυμία: Όρεγκον.
Customer Reviews 4.6 4.6 out of 5 stars 180 ratings 4.6 out of 5 stars
Is Discontinued By Manufacturer No
Item model number 110534
Item Weight 1.76 ounces
Manufacturer Oregon
Product Dimensions 8.8 x 6.2 x 0.6 inches

3.6

9 Review
5 Star
79
4 Star
11
3 Star
5
2 Star
2
1 Star
3

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: Randy Heatherly
Perfect little grease gun
Works perfectly
Scritto da: C. Lee
Hard to load but works fine
I load synthetic grease onto it and it’s a very messy process. The device works very well in what it is designed for - pushing grease into the nose sprocket of a chainsaw bar. I like the small size making it easy to carry in a chainsaw case.
Scritto da: Nathan W.
chainsaw must have
Ever used one of those chain saw grease guns that you push and push and nothing comes out? Me too, very frustrating, so I bought this and couldn't be happier. It works when you want it to and works well.
Scritto da: Artmon
Works Great
This little Grease Gun works perfectly. Easy to load cartridges, and easy to use. The Instructions on the backside of the package, however, are downright confusing if you intend on using Cartridges. Apparently much was lost being translated from German to English. Hint: If you're using Grease Cartridges, you won't need the Inner Plastic Plunger W/Chain; so leave it out. Use that part only if you intend on filling it full of raw non-cartridged Grease. The Cartridges make it soooooooo simple and soooooo easy. Using the Oregon Cartridge Refills is by far the best approach. 1: Remove the Outer Lower-Cap from the Grease Gun Body. 2: Remove the Inner Plastic Plunger from the Grease Gun, and store it somewhere. 3: Unpack one of the Oregon Grease Cartridges, and remove the protective End-Cap from the Cartridge. 4: Scoot the Cartridge up-Inside the Gun Body, with the 'Open End of the cartridge' Toward the Inside of the Gun. 5: After Cartridge is All The Way Inside, use your Thumb to 'Push' the Lower Plastic Cap at the Bottom of the Cartridge, until it "Bottoms Out". (There's lots of Air in the Gun Body, so you have to 'Bleed it Out'). 5: After you've completed the above, Test the unit to confirm it's Ready. If not, Air or Obstructions could be the cause. 6: Lastly, place the Outer Lower-Cap back onto the bottom of the Grease Gun and go to work.
Scritto da: Gregp
A must have
Every time I sharpen my chainsaw I grease the bar. The most often forgotten part any chainsaw that uses Oregon Bars is the grease is the sprocket on the tip. A must grease and grease gun for all chainsaw bars to protect expensive parts.
Scritto da: James Wood
Handy tool to have!
I bought this for chainsaw bars, but it turns out the thing works good for other things as well. You can actually use it on a regular zerk even. So far it seems to be sturdy enough to put up with living in the "chainsaw stuff crate".
Scritto da: Roy
Good Grease
Use this th grease your bar sprocket and the clutch bearing if your saw's crank is drilled to accept grease. This is easy to use with gloves, and will accept bulk grease or cartridges. I started with the cartrige that came with it, but now I just fill it from the end with a grease gun. The gun draws well, and I haven't had any trouble with it at all. I did spray paint mine safety yellow before I got it all greasy, and It's held the paint well. Update: I came across this review again, and it's been four years since I wrote it. This little grease gun is still in my saw box, which must mean that the yellow paint was worth it. It's also still working like new.
Scritto da: Anthony Inkell
Good grease gun
I was thinking that I would give it a try and I am sure glad I did best grease gun for a chain saw I have had.
Scritto da: Bill Riddell
It is as claimed
Works well as advertised

Σχετικά προϊόντα

hot
MTD Replacement Part 3-in-1 Star Blade
3.5/5

€ 74.10

MTD Replacement Part 3-in-1 Star Blade
3.5/5

€ 74.10

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array