Neiko 10072A 3/8-ιντσών Drive Extra Long Allen Hex Socket Set, SAE, 1/8-Inch - 3/8-Inch

Brand:Neiko

3.8/5

€
58.52

ΘΗΚΗ ΟΡΓΑΝΩΣΗΣ: Το σετ διατίθεται σε σκληρή πλαστική θήκη για εύκολη οργάνωση και αποθήκευση. ΚΟΙΝΗ ΜΕΓΕΘΗ SAE: Περιλαμβάνει μεγέθη υποδοχής μονάδας δίσκου 3/8 ιντσών (1/8, 3/16, 7/32, 1/4, 9/32, 5/16 και 3/8 ίντσες). FULL RANGE ALLEN HEX SET: Ένα πλήρες σετ SAE Allen και εξάγωνο σετ υποδοχής για DIY έργα στο σπίτι και επαγγελματική χρήση για κατασκευές, αυτοκίνητα και βιομηχανικές εφαρμογές. ΣΚΛΗΡΟ: Κατασκευασμένο από χάλυβα υψηλής αντοχής σε κράμα χρωμίου-βαναδίου με φινίρισμα χρωμίου-καθρέφτη για ανθεκτικότητα και μακροζωία. ΕΚΤΕΤΑΜΕΝΗ ΠΡΟΣΦΟΡΑ: Το εξαιρετικά μακρύ στέλεχος 4,3" παρέχει μεγαλύτερη εμβέλεια και ροπή για δυσπρόσιτα μπουλόνια και βίδες.

Δεν υπάρχουν διαθέσιμες μονάδες

EAN: 0837013100720

Κατηγορίες Εργαλεία & Είδη οικιακής βελτίωσης, Εργαλεία ισχύος & χειρός, Εργαλεία χειρός, Κλειδιά, Κλειδιά με υποδοχή,

Brand	Neiko
Drive System	Hex
Finish Type	Chrome, Polished, Steel
Item Dimensions LxWxH	7.8 x 4.7 x 1.6 inches
Size	7 PIECE SAE

5 Star

4 Star

3 Star

2 Star

1 Star

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με^*

Η βαθμολογία σας

Scritto da: Amazon Customer

Nice tools

Love it tool I will use often tried to borrow from my friend so I get my own everyone should have a set thank you

Scritto da: MEVEH

Exelente

Exelente herramienta

Scritto da: Pump1

Content buyer

They will work well for common work. To buy a truly great set, your costs will usually outweigh use

Scritto da: Rafael

Worked nice

Needed the long type to finish the job , worked great

Scritto da: Ivan Dorta

Good

Good

Scritto da: Mark P.

They work as intended, but don't buy for electricians.

I don't like that they are not the measured size for the whole shank. I cannot torque certain lugs (Siemens industrial breakers in particular) since the measured size is only about 5/8" long, then the shank expands to a larger hex stock to the drive adapter. I would not recommend this if you're an electrician and you care about proper torque. Anyone else, go right ahead!

Scritto da: Mad

Every day user

I use this Allen wrench set every day in my electrical work. They seem to be durable and a handy caring case is amazing. Usually break the tab off of it by now but it’s holding up.

Scritto da: David Sikking

Box furniture assembly

I just returned after 8 years in the Philippines with nothing but two suitcases. I rented an apartment and had to start from the word go again when it came to furniture. Some of the tables and chairs I assembled had Allen head screws instead of Philipps headed screws. Sure they give you the little 4mm Allen wrench to tighten them up with, but good luck to ever getting the screws that hold the legs on to tighten up well enough to hold securely. I actually found the solution by reading another review here on Amazon. I bought the long ones so that I did not have to fight with trying to fit my ratchet into the corner of the table. For that purpose, and for things like motorcycle farings etc. So that's my story on why I bought these Allen drives. I like the case which keeps the different sizes separated, making the right size easy to find. Altogether a great buy. A tip for those of you about how to get the legs to sit square. It says apply weight to the top. What weight you ask? A gallon of water weighs 10 lbs. Save your milk bottles and use them as weights to apply pressure.

Scritto da: Richard

Tools work well

The tools arrived in 2 days in perfect condition , I have used them once so far and that was to remove a metric bolt that holds the damper tube inside the forks on my 1986 Harley Davidson FLST , the length of the hex is 3 1/4 long

Scritto da: Corpus

Para tornillos hex de dificil acceso.

Estas puntas me sirvieron para aflojar tornillos con cabeza para allen, en donde el acceso alrededor del tornillo estaba muy limitado por otras partes de la maquinaria. La entrada "drive" de 3/8" de la punta me sirvió para acoplar una extensión y una "matraca" para aplicar mas palanca o torque a la hora de aflojar el tornillo (de 3/16" que era el que necesitaba quitar). Todo trabajó perfecto.

Scritto da: Asterixx

Nice bits

I work on European cars for a living and Lord knows some bolts are not easy to get a tool on. These long-shank bits do the job perfectly. So far, after half a year in my shop, they have not shown any visible wear or damage and fit the bolt heads tightly, as intended.

Scritto da: Kevin

Kick-ass long hex bits

I use this set daily as a CNC machine tool technician. I thought they would not hold up all that long in an industrial setting but to my surprise they have taking everything I throw at them. They have no sine of twisting or the ends stripping off and on occasion I have used them with a breaker bar. Would strongly recommend this set.

Scritto da: Bill G

Longer reach

They seem well made other than one of the Allen shafts was put in crooked. I will give a further review after more use. I work on Excavator drives so it will be a full workout of them.