Monarch Rain Chains 20042 Aluminium Black Powder Coated Gutter Adapter Rain Chain Installation, Standard

Brand:Monarch Rain Chains

3.7/5

53.10

Ο προσαρμογέας υδρορροής με μαύρη επίστρωση αλουμινίου της Monarch για κιτ εγκατάστασης αλυσίδας βροχής, τυπικό μέγεθος βελτιώνει τη ροή του νερού, μειώνει το πιτσίλισμα και συμπληρώνει την αλυσίδα βροχής. Ταιριάζει στις περισσότερες υδρορροές και συνοδεύεται από επιπλέον χάλκινη πλάκα για να χωράει μεγαλύτερες υδρορροές. Εύκολη εγκατάσταση που δεν απαιτεί εργαλεία.

Δεν υπάρχουν διαθέσιμες μονάδες
ΓΕΝΙΚΕΣ ΔΙΑΣΤΑΣΕΙΣ ΕΙΔΟΥΣ: Ο μειωτήρας υδρορροής αλυσίδας βροχής έχει διαστάσεις 5” (L) x 3,5” (Π) x (3)” Υ. Άνοιγμα κορυφής 2 ίντσες, άνοιγμα κάτω 1,75 ίντσες. Φροντίστε να καθαρίσετε τις υδρορροές σας πριν εγκαταστήσετε το κιτ προσαρμογέα υδρορροής αλυσίδας βροχής στην αλυσίδα βροχής εξωτερικού χώρου. ΕΥΚΟΛΗ ΕΓΚΑΤΑΣΤΑΣΗ: Ο εγκαταστάτης υδρορροής συνδέεται εύκολα απευθείας στην κορυφή των αλυσίδων υδρορροής. Το ορειχάλκινο μπουλόνι στον προσαρμογέα υδρορροής αλυσίδας βροχής μικρό έχει μια κεντρική αυλάκωση για να κρεμάτε και να ασφαλίζετε τις αλυσίδες βροχής για υδρορροές. INCREASE CURB APPEAL: Ένας εγκαταστάτης αλυσίδων βροχής, σε συνδυασμό με στόμια κατάρριψης αλυσίδων βροχής για υδρορροές, προσφέρει μοναδική απήχηση που θα βελτιώσει την εμφάνιση του σπιτιού σας. Ολοκληρώστε την εμφάνιση προσθέτοντας μία από τις λεκάνες αγκύρωσης ή τους πασσάλους αγκύρωσης. ΚΑΤΑΣΚΕΥΗ ΑΡΙΣΤΗ ΠΟΙΟΤΗΤΑΣ: Ο εγκαταστάτης υδρορροών αλυσίδας βροχής είναι κατασκευασμένος από αλουμίνιο με ορειχάλκινο μπουλόνι για να κρεμάτε την αλυσίδα βροχής σας. Το κιτ αδιάβροχης αλυσίδας παρέχει έναν ασφαλή τρόπο χωρίς ραφή για να κρεμάσετε τις αλυσίδες βροχής σας από την υδρορροή. ΛΕΙΤΟΥΡΓΙΚΟΣ ΣΧΕΔΙΑΣΜΟΣ: Ο προσαρμογέας της αλυσίδας βροχής έχει σχεδιαστεί για να ταιριάζει στην υδρορροή βροχής πάνω από την οπή αποστράγγισης όπου υπάρχει εκροή προς τα κάτω. Το στήριγμα της αλυσίδας βροχής συλλαμβάνει το νερό της βροχής και μειώνεται προς τα κάτω για να κατευθύνει το νερό από την υδρορροή στα στόμια της αλυσίδας βροχής.
Country of Origin India
Customer Reviews 4.6 4.6 out of 5 stars 1,067 ratings 4.6 out of 5 stars
Item model number 20042
Item Weight 4.6 ounces
Manufacturer Monarch Rain Chains
Product Dimensions 5 x 3.5 x 3 inches

3.7

13 Review
5 Star
78
4 Star
14
3 Star
5
2 Star
2
1 Star
2

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: Juana
Useful
These adapters for use with rain chains were easy to install and use immediately. I had three installed, with the rain chains in about an hour. Waiting for rain so we can watch them in action.
Scritto da: Cary Alburn
A pain to install, but once installed, worked perfectly.
The media could not be loaded. This adapter might work well in a pre-existing downspout hole, but cutting a hole where there wasn’t one was a pain. It would have been helpful if the instructions stated what size hole saw might be appropriate, but it didn’t. I think a 2 1/4” would work, but I only had a 2” and 2 1/2” in my tool box, so I used the larger one—hole saws are expensive. And cutting into a thin aluminum gutter is difficult. The reinforcement plate provided is slightly too wide for a standard 5” K gutter—so I cut off about 1/4” with tin snips so that it would lay flat in the bottom of the gutter. That’s something that the manufacturer should change, to make it easier to install in a 5” gutter—it would still have to be shaved for a 4”, but very few gutter installers install 6” gutters. I then sealed both the adapter and the reinforcement plate with gutter sealant, gluing them in place. My timing was perfect, because the gutter sealant instructions said to wait 24 hours—a driving rain happened 26 hours later. End results: great!
Scritto da: Goldens
Was exactly what we needed
Great fit for our rain chain
Scritto da: Meche
Larger adapter plate very helpful!
This Monarch rain chain install kit was just what I needed for my older gutters. The adapter piece on its own was not big enough to cover the shape and size of my gutter outlet so I put the larger plate through the top hat and glued them together with roof cement then dropped it through the gutter outlet and sealed in place. Kudos to the Monarch manufacturer for furnishing different size plates. I also like that the material is powder coated aluminum because the copper type would cause a corrosive reaction. Photos attached
Scritto da: Amazon Customer
Seems sturdy
I think some water leaks around from the sides but I guess it doesn't make a difference. It seems sturdy enough and u hooked a rain chain that was kinda heavy. Worked well for me.
Scritto da: Robert D.
Necessary to attach chain to gutter.
There were no instructions. Basically you will need a 2" hole saw to punch a hole in the bottom of the gutter. The adapter will just fit through thru. There is no way to attach or seal it to the bottom of the gutter. I used some silicone caulk to seal it and then drilled holes at each end of the adapter and screwed it to the gutter. The installation took 10 minutes - that is after I located a 2" hole saw, caulk and screws.
Scritto da: R S Cobblestone
Works great!
Works great with a Monarch Rain Chain link in my downspout!
Scritto da: JMLMT
Perfect and easy to install
This was so easy to install; drop it into place, and you're done after attaching the rain chain. It took me more time to remove the old spout (merely for aesthetics) and attach chain. A DIY project for sure
Scritto da: Francisco Garcia
Muy resistente
Todavia no lo instalo, pero es muy resistente
Scritto da: Leslie K.
Bad fit
They didn’t fit in my eves troughs. Totally useless and too late to return
Scritto da: Shannell
Superfluous to need
As above
Scritto da: Tinus
Good
Good system for rain chains
Scritto da: Judith A
easy to install addition to the rain chain
essential addition to the rain chain

Σχετικά προϊόντα

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array