Mayhew Pro 25017 3mm Pilot Punch 3mm X 4

Brand:Mayhew Tools

3.6/5

43.76

Το Mayhew 25017 Pilot Punch, 3mm έχει ένα πρωτότυπο πατενταρισμένο σχέδιο Mayhew με στρογγυλεμένο άκρο που εφαρμόζει άνετα μέσα σε έναν ρολό. Γνωστό και ως roll pin punch. Χρησιμοποιείται για την εισαγωγή και την αφαίρεση ακίδων ή άλλων κοίλων ακίδων τάνυσης. Φτιαγμένο στις ΗΠΑ. OAL: 4-ίντσες, μέγεθος σώματος: 1/4-ίντσα, τύπος σώματος: Στρογγυλό, πλάτος λεπίδας: 3 mm και βάρος: 0,04-λίβρα. Το Mayhew σημαίνει ποιότητα, αξιοπιστία και εμπιστοσύνη. Όταν το διαμέτρημα των εργαλείων είναι εξίσου σημαντικό με τις δεξιότητες των επαγγελματιών που απασχολούνται, οι επιχειρήσεις εμπιστεύονται τον Mayhew για να ολοκληρώσει τη δουλειά. Από το 1856, οι γροθιές, οι σμίλες και οι ράβδοι μας είναι τα πιο δημοφιλή εργαλεία για OEM και επαγγελματίες μηχανικούς σε όλη τη χώρα. Και ενώ η εταιρεία μας έχει αναπτυχθεί για να ανταποκρίνεται στις ανάγκες της επαγγελματικής αγοράς, καθώς και εκείνων του λάτρη της αυτοκινητοβιομηχανίας do-it-yourself, η εστίασή μας δεν άλλαξε ποτέ - αξιοποιώντας τη δύναμή μας για να χτίσουμε την επιχείρησή σας.

Φτιαγμένο στις ΗΠΑ. Χρησιμοποιείται για την εισαγωγή και την αφαίρεση ακίδων ή άλλων κοίλων ακίδων τάνυσης. Γνωστό και ως roll pin punch. Αυθεντικό κατοχυρωμένο με δίπλωμα ευρεσιτεχνίας σχέδιο Mayhew με στρογγυλεμένο άκρο που εφαρμόζει άνετα μέσα σε ένα ρολό.
Batteries Required? ‎No
Color ‎Steel
Customer Reviews 4.6 4.6 out of 5 stars 130 ratings 4.6 out of 5 stars
Included Components ‎Pilot Punch 3mm x 4"
Is Discontinued By Manufacturer ‎No
Item model number ‎25017
Item Package Quantity ‎1
Item Weight ‎0.16 ounces
Manufacturer ‎Mayhew
Material ‎Blend
Measurement System ‎Metric
Number of Handles ‎1
Part Number ‎25017
Power Source ‎Hand Powered
Product Dimensions ‎4 x 0.25 x 0.25 inches
Size ‎3mm X 4
Warranty Description ‎Lifetime Warranty

3.6

8 Review
5 Star
77
4 Star
11
3 Star
7
2 Star
2
1 Star
3

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: Rick Krull
Works well
Works well for my gunsmithing.
Scritto da: JW
When metric is what you need.
You know, there's not much difference between 2mm and 5/64" (less than 1/1000" difference); but when you're dealing with spring pins (a.k.a. roll pins), it's always best to have as good a fit as you can. This was the right tool for the job. My only complaint is that I wish the handle was longer and the shaft shorter.
Scritto da: MKB
Good
I purchased this so I could remove a pin to change out the grips on my HK VP9. Fit was perfect
Scritto da: Cllzzrd
Grip is nice, it bent the first time I tried to use it
The grip could be longer, the knurling on the grip is nice to hold on to. It bent the first time I used it
Scritto da: If and When
Diameter of shaft wrong
I ordered two of these for a very specific job while working on a Mercedes Benz engine. The diameter needed to be exactly 3 mm. The two punches I received were both stamped as 3 mm but the diameters were different. The difference was big enough to be seen with the naked eye, but I tested with my micrometer and one was larger than 3 mm and one was smaller than 3 mm. The total difference was about 1/2 mm. I could not use either of the two for their intended purpose. I ended up going to Home Depot and finding a suitable nail and bought two of them. The nails worked perfectly and cost much less. Bottom line, if the diameter of these punches is critical to you do not order these because, apparently, the diameter is not critical to the manufacturer.
Scritto da: P. Williams
Works as advertised
I had a compression pin that wouldn’t budge. Tried everything. This loosened it in about 10 seconds. Helps to have the right tool.
Scritto da: AAA MARINE PARTS WHOLESALE
perfect
commercial use-works fine
Scritto da: Kenneth E Turner
I like it.
Decent punch at a decent price.

Σχετικά προϊόντα

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array