Lippert 285325 24 Scissor Jack, μαύρο μονό πακέτο 24 ιντσών

Brand:Lippert Components

3.7/5

174.59

ΑΞΙΟΠΙΣΤΙΑ ΑΝΤΟΧΗ—Αυτή η υποδοχή ψαλιδιού έχει αξιολογηθεί για να υποστηρίζει χωρητικότητα φορτίου έως 5.000 λίβρες ανά υποδοχή. ΑΣΦΑΛΗ ΕΓΚΑΤΑΣΤΑΣΗ—Τα κιτ ψαλιδιού γρύλου μας συνοδεύονται από όλο το υλικό στερέωσης που απαιτείται για την εγκατάσταση με μπουλόνι στον 5ο τροχό, στο ρυμουλκούμενο ταξιδιού ή στο ρυμουλκούμενο φορτίου/χρησιμοποιημένου. EXTENSION RANGE—Η υποδοχή ψαλιδιού εκτείνεται έως το μέγιστο 24" και ανασύρεται σε 4-1/4" για συμπαγή αποθήκευση όταν δεν χρησιμοποιείται. ΟΙΚΟΝΟΜΙΚΗ ΛΥΣΗ—Φθηνό και εξαιρετικά αξιόπιστο, αυτό το κιτ ψαλιδιού είναι απαραίτητο εάν αντικαθιστάτε μια παλιά ή σπασμένη υποδοχή σταθεροποίησης. ΑΝΘΕΚΤΙΚΗ ΚΑΤΑΣΚΕΥΗ—Στιγμένο με μαύρο φινίρισμα με βαφή πούδρας και επιφάνεια που αναστέλλει τη σκουριά που του επιτρέπει να υποστεί τη φθορά του ταξιδιού RV.

ΑΞΙΟΠΙΣΤΙΑ ΑΝΤΟΧΗ—Αυτή η υποδοχή ψαλιδιού έχει αξιολογηθεί για να υποστηρίζει χωρητικότητα φορτίου έως 5.000 λίβρες ανά υποδοχή. ΑΣΦΑΛΗ ΕΓΚΑΤΑΣΤΑΣΗ—Τα κιτ ψαλιδιού γρύλου μας συνοδεύονται από όλο το υλικό στερέωσης που απαιτείται για την εγκατάσταση με μπουλόνι στον 5ο τροχό, στο ρυμουλκούμενο ταξιδιού ή στο ρυμουλκούμενο φορτίου/χρησιμοποιημένου. EXTENSION RANGE—Η υποδοχή ψαλιδιού εκτείνεται έως το μέγιστο 24" και ανασύρεται σε 4-1/4" για συμπαγή αποθήκευση όταν δεν χρησιμοποιείται. ΟΙΚΟΝΟΜΙΚΗ ΛΥΣΗ—Φθηνό και εξαιρετικά αξιόπιστο, αυτό το κιτ ψαλιδιού είναι απαραίτητο εάν αντικαθιστάτε μια παλιά ή σπασμένη υποδοχή σταθεροποίησης. ΑΝΘΕΚΤΙΚΗ ΚΑΤΑΣΚΕΥΗ—Στιγμένο με μαύρο φινίρισμα με βαφή πούδρας και επιφάνεια που αναστέλλει τη σκουριά που του επιτρέπει να υποστεί τη φθορά του ταξιδιού RV.
Brand Lippert Components
Brand ‎Lippert Components
Color ‎black
Country of Origin ‎China
Customer Reviews 4.6 4.6 out of 5 stars 1,164 ratings 4.6 out of 5 stars
Item Dimensions LxWxH ‎33.5 x 11.25 x 4.75 inches
Item model number ‎285325
Item Weight ‎14.52 Pounds
Load Capacity 5000 pound
Load Capacity ‎5000 pound
Manufacturer ‎Lippert Components
Manufacturer Part Number ‎285325
Material Alloy Steel
Material ‎Alloy Steel
Maximum Lifting Height 24 Inches
Maximum Lifting Height ‎24 Inches
Model ‎285325
Product Dimensions ‎33.5 x 11.25 x 4.75 inches
Special Features ‎Mounting base dimensions: 10-1/4" long x 3-1/4" wide, Height: Collapsed: 4-1/4", Extended: 24", Collapsed length: 26-3/16", Large bolt hole dimensions: 11/16" long x 7/16" wide, Small bolt hole diameter: 5/16"
Style ‎Single Pack
Vehicle Service Type Trailer
Vehicle Service Type ‎Trailer

3.7

13 Review
5 Star
78
4 Star
14
3 Star
3
2 Star
2
1 Star
3

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: Erin Glenn
Worth The Money
Jacks were well worth the Money, Bigger and heaver than Jacks that came on the camper, very pleased
Scritto da: Gordon Vancouver ,wa
BEST IN THE INDUSTRY
JUST REPLACED ONE WHY ?? BECAUSE I DIDN'T USE IT AS RECOMMENDED
Scritto da: mike333
I wouldn't put 5k pound load on one of these.
These are affordable and flimsy. The jacks perform ok if they are on a perfectly flat surface to support a perfectly stable trailer. Any angle introduced at all will have these jacks twisting in a scary way. I would feel safe using these at 1/2 to 1/3 of their stated capacity. The handle included also twists and bends while putting a load on the jacks. I don't expect it to last much longer than a week.
Scritto da: R. G. Godbold
Lippert 285344 30" Scissor Jack
The media could not be loaded. It's a good, normal, sturdy scissor jack; it does the job. It stops the up/down motion as expected. It does not do much for controlling lateral movement (also, as expected). I love the circle shaped mount plate, because it let me mount it at a 45 degree angle. I think it gives a slight advantage to lateral stability, but the main reason I did that was so when the jack is retracted, the end doesn't stick out from under the trailer. That's one less thing to worry about when in a tight spot. I mounted them directly to the I-beam instead of the awful location that the RV manufacturer did: on the bumper. Now they're low profile, and if a bad road makes the tail drag on the ground, the bumper will hit long before these do. Since they're 30", they'll contact the ground long before they fully extend (which is what you want), but I still use blocks. After the pilot hole was drilled, I used a 11/32" drill bit for the final hole and then the supplied self-threading bolts went in fine. Between these, and my SteadyFast stabilizers (which I kept from my last trailer), I've had to drill 32 holes into RV I-beams (24 for mounting the SteadyFast twice, and 8 for these). The pilot hole makes all the difference; don't skip it!
Scritto da: Rodney
Sturdy product
Arrived fast and item was just as described. Only negative it the bolt holes on top do not line up with existing/standard pattern bolt holes on the camper. Had to drill new holes but working g perfect now
Scritto da: G. P. Hawkins
Good solid stabilizer, easy to install
I used this stabilizer jack to replace one I damaged (it wasn’t all the way up when I moved the trailer). The replacement was easy to install. It took about 45 minutes to complete because of the need to move JT Strongarm hardware from the old one to the new one. Actual installation was removing 3 screws and one bolt (each RV maker differs) and then reversing the process. Make life easier by lowering the old jack so it doesn’t fall when unscrewed and raise the new one to just touch when installing it. The 5,000 pound version has a top round mounting plate that is slightly flimsier than I would prefer. I might consider removal of all the stabilizers and braze a stiffer top mounting plate on, in order to reduce trailer shaking.
Scritto da: Angela Fleming
Scissor Jacks
These are just what my camper needed. They were delivered sooner that expected. I am very pleased
Scritto da: Rick Shurock
Nice scissor Jack
Nice Jack. Easy install. Would’ve been 5 stars but it contained no mounting hardware.
Scritto da: jeff
Fonctionne très bien pour ma fifthwheel
Utilisé pour mon vr
Scritto da: jakewash
Good but could be better
Extra long 30 inch length is great for added strength and stability. Having said that, the arms are a little weak, could use a thicker steel for even more stability.
Scritto da: PATRICK PEPIN
Tres satisfait
Réponds a mes attente
Scritto da: Sully
Thanks
Perfect
Scritto da: Kevin
Defective
Failed after second use. Supplier sent a replacement and charged me for the replacement

Σχετικά προϊόντα

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array