Κιτ στοίβαξης πλυντηρίου ρούχων General Electric WE25X10028, Γκρι

Brand:GE

2.8/5

110.66

Επωνυμία: Ge. Ρούχα-Πλύσιμο-Πλυντήριο-Ανταλλακτικά. Αυτό είναι ένα γνήσιο ανταλλακτικό. General Electric (Genf0).

Επωνυμία: Ge. Ρούχα-Πλύσιμο-Πλυντήριο-Ανταλλακτικά. Αυτό είναι ένα γνήσιο ανταλλακτικό. General Electric (Genf0).
Brand GE
Color Gray
Included Components GEFLSTACK WE25X10028 Washing Machine Stacking Kit
Model Name GEFLSTACK

2.8

8 Review
5 Star
42
4 Star
27
3 Star
12
2 Star
6
1 Star
14

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: PoochMania
Expensive, poor instruction & doesn't fit on all 27" GE Front Load W/D
After I received the kit, I feel it is too expensive for what it is. But, I believe this price was the lowest that I've found under GE stacking kit. And it doesn't fit for my machine even though I was told it should fit for my WD. After put the 4 little sticky bottom protector (which sticky doesn't stick, so I had to use my double sided sticky tape to make it stay), and attach the kit to bottom of my dryer and set it on the top of washer, L bracket doesn't touch the washer. It has at least 1/2 inch gap between the bracket and the back of the washer. Also, holes in the bracket does not match the holes in the washer. I needed stacking kit so badly, so instead of returning the item, I made it to fit for my washer by adding 15 rubber washer to fill the gap and screw though middle of the hole in the rubber washer into the washer. And made new hole on back of my washer to match up with bracket for the 2nd screws. I am not sure other stacking kit would have work perfectly for my machine or not, but that wasn't the case for me. However, if it is for the right W/D stacking, very simple to attach it. I think it would have big help if seller put detail of what model this stacking kit would work in the description.
Scritto da: Pen Name
Right kit for my appliances
This fit my washer/ dryer just fine. Check the list provided by the seller before buying or check GE's website for the right kit. The parts are sturdy steel. It's expensive for what you get, but it is solid and the screw holes lined up perfectly. The appliances are secure together and there is no wobble or weakness in the way they are secured together. My only complaint is that the adhesive that is supposed to hold the rubber feet in place provide absolutely no stick at all. I used clear box tape to hold it in place until I had the dryer in place. The box appeared to be marked with a manufacturing date of over 3 years ago so maybe the glue dried out? Bottom line is that it does the job and anyone can install this if you have the muscle to position the dryer up top.
Scritto da: Britoutofwater
Does what it says on the tin
Works as advertised and relatively easy to install. Like others have have said, it seems good quality and does what it's supposed to, it just seems pricey for what you get. A word of warning though for anyone thinking of stacking their washer/drier, the controls for the drier end up really quite high. Both of the people in our home that do laundry are fairly short (4'10" and 5'3") and it is quite a stretch for us to load the laundry and reach the buttons. I didn't really think about it until they were stacked and by then it was already done and I wasn't about to undo it as we still needed the extra space it created, but it isn't an ideal set up for us.
Scritto da: Drex
Overpriced Indeed
Bought this kit to put on my brand new 27" GE washer/dryer. First, the pads do NOT stick. We tried using liquid nails which also didn't work, but we did manage to get the dryer on top with three of the pads in place and had to tilt the dryer to get the fourth in place. Second, the bracket holes don't line up with the washer. The instructions show two identical brackets as does the picture on Amazon's website, but the brackets I received one is different. Not sure if that's the problem or not. We are still trying to determine how to get the brackets to work.
Scritto da: CRJonesy
Did the trick - but buy new screw
This did the job as expected! However, I was not able to get the bracket mounting screws to thread into the dryer. I spent 20 cents on some self-drilling screws and all was well!
Scritto da: PRG NC
Does not fit all 27" GE washer/dryers
I ordered this thinking that it would fit any GE 27" front load W/D set but it did not fit on my 2-year-old Spacemaker machines. :( I just thought I would post in case others are confused about whether or not this is a "universal" stacking kit since the item description doesn't provide a lot of detail. Though I didn't install it, it appeared to be of high quality. As others have noted, it is a lot of money given what you get, but it seems like stacking kits- no matter the vendor or manufacturer- are super expensive. As always, Amazon shipping and returns were fast and trouble-free.
Scritto da: R. W.
I could not make heads or tails of the directions
I had no clue where to start. It took my husband and handyman a couple hours to figure it all out, but once they did it works exactly like its supposed to. My dryer is stacked on my washer and is very sturdy and doesn't vibrate. Its kind of expensive for what it is, but I didn't find any alternatives.
Scritto da: Kelsey
It worked
The kit worked, it was easy to install and the directions were easy to understand. However, the black pads that were supposed to stick on the bottom of the dryer did not stick whatsoever. The sticky stuff that was on the pads didn't work. So I tried adding my own glue but even after using multiple glues the pads would not stay in place long enough to place the dryer on top of the washer. This made it difficult to place the dryer on top of the washer without scratching the finish.

Σχετικά προϊόντα

hot
Samsung DA92-00592A Assy Pcb Main
0/5

€ 121.08

Samsung DA92-00592A Assy Pcb Main
0/5

€ 121.08

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array