Κιτ επισκευής αντλίας νερού Quicksilver 96148A8 για εξωλέμβια και πρύμνη: Mercury and Mariner 65 Hp (4-κύλινδρος) μέσω V-6 εξωλέμβιες με πτερωτές κοντών πτερυγίων

Brand:Quicksilver

3.8/5

113.13

Κατασκευάστηκε για να πληροί τις προδιαγραφές κατασκευαστή γνήσιου εξοπλισμού Mercury Marine για μεγιστοποίηση της απόδοσης της εξωλέμβιας μονάδας Mercury and Mariner ή της πρύμνης MerCruiser. Ένα από τα πιο ολοκληρωμένα κιτ που διατίθενται για την επισκευή αντλιών νερού εξωλέμβιας και πρύμνης. Ανατρέξτε στο εγχειρίδιο κατόχου ή στο εγχειρίδιο σέρβις για συγκεκριμένες εφαρμογές και οδηγίες αντικατάστασης. Για επιλεγμένες εξωλέμβιες Mercury και Mariner με πτερωτές με κοντό πτερύγιο και επιλέξτε κινητήρες πρύμνης MerCruiser. Επεκτατικό κιτ για την αντικατάσταση της πτερωτής νερού, του άνω και κάτω περιβλήματος, της πλάκας πρόσοψης, των παρεμβυσμάτων, του κλειδιού κίνησης, του στεγανοποιητικού προσώπου, του φορέα στεγανοποίησης και του συνδέσμου σωλήνα νερού.

Δεν υπάρχουν διαθέσιμες μονάδες
Κατασκευάστηκε για να πληροί τις προδιαγραφές κατασκευαστή γνήσιου εξοπλισμού Mercury Marine για μεγιστοποίηση της απόδοσης της εξωλέμβιας μονάδας Mercury and Mariner ή της πρύμνης MerCruiser. Ένα από τα πιο ολοκληρωμένα κιτ που διατίθενται για την επισκευή αντλιών νερού εξωλέμβιας και πρύμνης. Ανατρέξτε στο εγχειρίδιο κατόχου ή στο εγχειρίδιο σέρβις για συγκεκριμένες εφαρμογές και οδηγίες αντικατάστασης. Για επιλεγμένες εξωλέμβιες Mercury και Mariner με πτερωτές με κοντό πτερύγιο και επιλέξτε κινητήρες πρύμνης MerCruiser. Επεκτατικό κιτ για την αντικατάσταση της πτερωτής νερού, του άνω και κάτω περιβλήματος, της πλάκας πρόσοψης, των παρεμβυσμάτων, του κλειδιού κίνησης, του στεγανοποιητικού προσώπου, του φορέα στεγανοποίησης και του συνδέσμου σωλήνα νερού.
Brand Quicksilver
Item Weight 9.92 Ounces
Material Various Materials

3.8

13 Review
5 Star
83
4 Star
11
3 Star
3
2 Star
1
1 Star
2

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: Mark San Antonio, TX
2007 Mercury Optimax 150
Fit my 2007 Mercury Optimax 150. 2 person job to install.
Scritto da: bargin hunter
Water pump rebuild kit for Mercruiser Alpha 1, Gen. 1
This was a perfect factory rebuild kit for the lower unit water pump in my Mercruiser 175 hp Alpha 1, Gen. 1. If you have never done this before, it would be a good idea to look in a service manual or on YouTube to see what it entails. The kit does not come with instructions, just the parts. If you are comfortable doing mechanical work, you can save money by doing this yourself.
Scritto da: KrystynaM
worked on 1993 200hp mercury
perfect fit for 2 stroke outboard had several different gaskets as well, water is flowing out the back again! wasnt to hard to install took about an hour
Scritto da: Preston
Prefect oem replacement. You might not use everything.
Perfect oem replacement. Remember the kit fits multiple models and there may be parts you don't use. I scratched my head for a while trying to figure out where everything went. I installed on an alpha 1 gen 1 and it pressure tested perfectly.
Scritto da: Ricky N
Great for Alpha one Gen one
Needed new Impeller. This one replaced all necessary parts with perfect fit. Functions as it should.
Scritto da: Scott Mlynek
Alpha one Generation??
This product is fine and has all the necessary gaskets, but it is listed as an Alpha One kit. Unfortunately my mechanic told me it would not fit because my outdrive is an alpha one Gen II. Nowhere in the description that i saw, did it define a difference of Gen I or Gen II. That would have saved me time. Ultimately, this looks to be a good product.
Scritto da: liz
Works with Alpha one Gen one
It works with my 1990 Alpha one Gen one. Lots of extra parts you dont need in the kit. It does come with the gasket for under the actual pump and the three gaskets above it
Scritto da: Harvey L. Anderson
As expected
Arrived on time and works fine in my 1990 Mercury Outboard V-6, 135 hp.
Scritto da: WMS
Info on website correct & the right parts arrived.
The info about the water pump kit for a Mercury motor from this supplier was correct. The previous site on another Amazon supplier was just a bunch of hogwash, just some left over jobber parts thrown in a box. I ordered it since it list the parts as Quicksilver which is a Mercury part, it arrived 2 days earlier than expected. I changed it out in about an hour - CUZ EVERYTHING FIT!
Scritto da: M-A
Exacly what I needed
Fit my alpha one gen one, all what I needed but alot of extra parts
Scritto da: Kindle Customer Debbie Dutton
all the parts you need
easy to use and all the components needed for the job
Scritto da: Beryl Isaac
Prompt delivery and top quality
Very good quality items for my boat.
Scritto da: D
All ya need except base...perfect for a repair.
Merc part everything needed for the job but water pump base.

Σχετικά προϊόντα

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array