Επίπεδη ροδέλα από χάλυβα για μικρά εξαρτήματα, φινίρισμα με κίτρινο χρωμικό ψευδάργυρο, βαθμού 8, ASME B18.22.1, 9/16 Μέγεθος βίδας, 5/8 ID, 1-1/2 OD, 0,11 πάχος (Συσκευασία των 25)

Brand:Small Parts

3.7/5

45.06

Πληροί τις προδιαγραφές ASME B18.22.1. Η επίστρωση ψευδαργύρου κίτρινου-χρωμικού άλατος προσφέρει καλή αντοχή στη διάβρωση. Ο χάλυβας 8 είναι ισχυρότερος από τον χάλυβα ποιότητας 5 και χρησιμοποιείται συχνά σε εφαρμογές όπου η αντοχή είναι το κύριο μέλημα. Η επίπεδη ροδέλα παρέχει μια επιφάνεια έδρασης για την κατανομή του φορτίου του συνδετήρα ή λειτουργεί ως διαχωριστικό.

Πληροί τις προδιαγραφές ASME B18.22.1. Η επίστρωση ψευδαργύρου κίτρινου-χρωμικού άλατος προσφέρει καλή αντοχή στη διάβρωση. Ο χάλυβας 8 είναι ισχυρότερος από τον χάλυβα ποιότητας 5 και χρησιμοποιείται συχνά σε εφαρμογές όπου η αντοχή είναι το κύριο μέλημα. Η επίπεδη ροδέλα παρέχει μια επιφάνεια έδρασης για την κατανομή του φορτίου του συνδετήρα ή λειτουργεί ως διαχωριστικό.
Exterior Finish Zinc Chromate
Fastener Size 9/16"
Is Discontinued By Manufacturer No
Item model number B009OKEWLU
Manufacturer Small Parts
Material Alloy Steel
Outside Diameter 1.500' Inches
Package Dimensions 5.75 x 3.62 x 0.83 inches; 8.8 Ounces
Washer Type Flat

3.7

10 Review
5 Star
83
4 Star
10
3 Star
3
2 Star
0
1 Star
3

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: Spyder Lake
Not as advertised.
Nothing wrong with these washers unless you expect the dimensions advertised. Standard thickness for this sized washer is 0.11 inch and these are advertised as such. However, the supplied washers are only 0.088 inch thick. This equates to a washer that is only about half as stiff as the standard because stiffness, in relation to thickness, is a cubed function -- ( [0.11/0.088]^3 = 1.95). Depending on your application this less rigid behavior could be; good, OK, ... or not.
Scritto da: UKRocky
Functional
Functional and good value
Scritto da: Mike
Inside Diameter is .635
The washer fits 5/8 shafts and bolts closely with minimal clearance. Great for gorilla carts, hand trucks, etc. with 5/8" shafts.
Scritto da: DOUG
Used as 5/8" spacers
These are being used as spacers between between blades on my table saw. The shaft is 5/8" but the center of washers are manufactured larger than the nominal rating. Therefore,a 5/8" washer will be larger and not be centered on the shaft and cause vibration. The center opening of these 9/16" washers is much closer to 5/8" and works great for my purpose. At times, several of these are stacked together so that I might achieve my desired dimensions. Furthermore, these are much cheaper and thicker than 5/8" machine bushings.
Scritto da: Flyingtigersdown
Good purchase. Inside Diameter (ID) a true 5/8" measurement
Good purchase. Inside Diameter (ID) a true 5/8" measurement. As mentioned in other review, other 5/8" washers I purchased had larger ID than 5/8". Used as spacer on 5/8" arbor on bench grinder. Worked well, happy with purchase.
Scritto da: Matthew A.
Was shipped quickly
Good quality washer
Scritto da: Joe S
great value
Good product and great price. Thank you
Scritto da: Joseph Casey Heaton
It worked
They worked, very little flex
Scritto da: John
They're round and have a hole
Good quality washers. Fast shipping. Great price.
Scritto da: Mike
It's a washer.
It spaces things.

Σχετικά προϊόντα

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array