EATON Wiring 7504A 15-Amp 120/277-volt Standard Grade 4-Way Decorator Switch with Back, Push and Side Wiring, Almond

Brand:Eaton

3.7/5

49.82

Ο διακόπτης διακοσμητικού 4 κατευθύνσεων Eaton 7504A Standard Grade είναι κατασκευασμένος από θερμοπλαστικό και το επάνω μέρος και το μαύρο σώμα είναι ουσιαστικά άθραυστα. Ο ιμάντας και το σώμα είναι ενσωματωμένα με συγκόλληση υπερήχων για επιπλέον αντοχή. Αυτός ο διακοσμητικός διακόπτης διαθέτει σφιγκτήρες πίσω καλωδίου στις πλευρές των ακροδεκτών για εύκολη εγκατάσταση του αρ. 12 και αρ. 14 σύρμα. Τα τερματικά push-in δέχονται τον αριθ. 14 συμπαγές σύρμα. Αυτός ο διακόπτης διαθέτει ένα κατοχυρωμένο με δίπλωμα ευρεσιτεχνίας ενσωματωμένο απογυμνωτή καλωδίων για όχι. 14 και αρ. 12 σύρματα για γρήγορη εγκατάσταση. Στάνταρ ακροδεκτών με ραβδωτή βίδα γείωσης. Για να γίνει η εγκατάσταση γρήγορη και εύκολη, αυτό το προϊόν δέχεται εργαλεία με σχισμή, κεφαλή Phillips και Robertson. Αυτός ο διακόπτης είναι συμβατός με το πλάι, το πίσω μέρος και το καλώδιο ώθησης και το cULus αναφέρεται στο UL20. Αυτός ο διακόπτης διακόσμησης έχει ονομαστική απόδοση 15 αμπέρ, 120/277 βολτ και διατίθεται σε αμύγδαλο φινίρισμα. Ο διακόπτης διακοσμητή 4 κατευθύνσεων Standard Grade Eaton 7504A συνοδεύεται από περιορισμένη εγγύηση 2 ετών που προστατεύει από ελαττώματα στο υλικό και την κατασκευή. Η Eaton προσφέρει καινοτόμες λύσεις καλωδίωσης που αυξάνουν την παραγωγικότητα, την ενεργειακή απόδοση και την ασφάλεια στο εργοτάξιο και στο σπίτι. Η εκτεταμένη προσφορά τους περιλαμβάνει συσκευές συμβατές με κώδικα για μονοκατοικίες και πολυκατοικίες ή έργα ανάπτυξης κατοικιών. Η Eaton είναι ένα αξιόπιστο όνομα στα ηλεκτρικά προϊόντα για περισσότερα από 175 χρόνια και έχει την έδρα της στο Peachtree, GA και διαθέτει διεθνείς εγκαταστάσεις παραγωγής και διανομής.

Δεν υπάρχουν διαθέσιμες μονάδες
Διατίθεται σε αμύγδαλο και έχει 2 χρόνια περιορισμένη εγγύηση. Πίσω σφιγκτήρες καλωδίων στις πλευρές των ακροδεκτών για εύκολη τοποθέτηση του σύρματος #12 και #14. Δέχεται εργαλεία με σχισμή, Phillips και Robertson με κεφαλή και οι βίδες ακροδεκτών έχουν οπισθοχωρήσει και είναι έτοιμες για καλωδίωση. Το επάνω μέρος και το μαύρο σώμα είναι ουσιαστικά άθραυστα, υποσχόμενοι χρόνια αντοχής. Αξιολογείται για 15 αμπέρ και 120/277 βολτ για εναλλαγή από τρεις ή περισσότερες θέσεις.
Batteries Included? ‎No
Batteries Required? ‎No
Brand Eaton
Brand ‎Eaton
Circuit Type 4-way
Circuit Type ‎4-way
Color ‎Almond
Connector Type Screws
Connector Type ‎Screws
Controller Type Almond
Controller Type ‎Almond
Country of Origin ‎China
Current Rating 15 Amps
Current Rating ‎15 Amps
Customer Reviews 4.6 4.6 out of 5 stars 661 ratings 4.6 out of 5 stars
Domestic Shipping Item can be shipped within U.S.
International Protection Rating IP00
International Protection Rating ‎IP00
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Item Dimensions LxWxH 1.89 x 1.89 x 1.89 inches
Item Dimensions LxWxH ‎1.89 x 1.89 x 1.89 inches
Item model number ‎7504A-BOX
Item Package Quantity ‎1
Item Weight ‎0.8 ounces
Manufacturer ‎EATON
Material Thermoplastic
Material ‎Thermoplastic
Mounting Type Surface Mount
Mounting Type ‎Surface Mount
Number of Items ‎1
Part Number ‎7504A
Product Dimensions ‎1.89 x 1.89 x 1.89 inches
Switch Style Push Button
Switch Style ‎Push Button
Unit Count ‎1.0 Count
Voltage ‎120 Volts

3.7

13 Review
5 Star
76
4 Star
15
3 Star
6
2 Star
2
1 Star
2

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: Karen
Cheaply made
They make a loud clicking noise turning on and off
Scritto da: D. Ghiroli
Easy to wire, works fine so far
Easy to wire, just push in the stripped wire and tighten the screws. Seems to be well made and at a reasonable price. It works fine now and I expect it to work well for a long time, though I can’t report of the longevity of the product as I just installed it and my project has a long way to go before completion.The one thing is I was ordering an Eaton 4 way switch and what came is a Cooper 4 way switch. As long as it works that’s not really a problem here as the description is still correct being a decora 4 way switch in almond. I’d buy again.
Scritto da: Steffy
Works great
We redid all the light switches in our house and love the simplicity of these toggle switches. We have a hallway that has 3 light switches through out and couldn’t get the ones we had to work so we ordered this one to try and fix the issue and bam! We were working perfectly. I would buy this one again if for some reason we needed another.
Scritto da: N. Franke
Best 4-way I've found
I first got the Leviton "quiet" 4-way, which didn't work properly. This was a little more expensive but it actually does work. The feel of the switch when pressed is better than the Leviton and, as noted, it actually turns stuff off and on properly. There is an annoying gap on one side which knocked off a star since it looks a little unprofessional. This gap is between the toggle part and the border, not in relation to the wall plate so you can't fix it.
Scritto da: TonyD
BE AWARE: This is NOT a normal switch (that's why some people are rating it poorly).
This switch gets poorly rated because it's easy to break if you think it's a normal switch. Normal switches allow for side installation via a termination under the screw. And pros prefer side wiring vastly over back wiring (aka "back stabbing"). So pros are baffled when they turn the screws and the screw doesn't come out. But what is happening is there is a sliding clamp that is compressing and decompressing for the backwiring component. When you loosen the screw, you have to allow gravity to let the clamp fall and open up for you to insert the wire in the back then you can tighten it. ** Again, the screw doesn't really move out from the switch when you turn it. This is incredibly counter-intuitive. ** The backwiring isn't a pressure lock friction system typical in backwiring, but more like a GFCI clamp based locking mechanism. Steps to install this switch: 1) Unscrew until the screw doesn't want to turn (the clamp is as open as it can be), 2) Flip the switch to let the clamp open up with gravity, 3) Backwire your wires (not on the sides under the screws) 4) Tighten screw to clamp it down. Great switch - but terribly counter-intuitive installation for lovers of side wiring.
Scritto da: PrimeExample
4-way switch than can be used in 3 light switch situations
This is very nice. I used it in a 3 switch configuration not 4 like the title of the switch says. You could probably even get it working as a 1-way or 2-way switch. I guess if you think about it, it is always a 2-way switch since one way the switch is "on" and the other way it is "off". It doesn't have 2 other ways besides on and off if that's what you where thinking, it's only on and off. 0 and 1, True and False, yin and yang. You get the picture, I hope. The quality is pretty good also. If you don't know how to use the internet or are dumb then you should probably get an electrician to install this for you. Although, I have met a few electricians who where dumb and didn't know how to use the internet so good luck.
Scritto da: John Scalley
Exactly as advertised.
What else can I say? Product is well made. It's perfect for the 2 high hats we have on the 2nd floor landing at the top of the stairs between the bedrooms and bathroom. There's one switch at the bottom of the stairs, another outside the master and this one finished the job outside the 2 guest bedrooms. I'm not an electrician, just a new homeowner... so I needed to switch out some old switches for new ones. This was extremely easy.
Scritto da: Denver family
Great quality 4-way switch. Screw wire clamp works in reverse
Good quality switch and worked great. A NOTE FOR INSTALLERS: Use the holes and don't struggle to wrap the wire around the screw! The switch comes from the factory ready to accept the wire in the hole. Put the wire in and turn the screw clockwise to clamp down. This is because the pressure plate moves towards the screw head when you turn the screw clockwise and not the other way around as you would expect. Do NOT back the screw out all the way because it does't re-thread!
Scritto da: Tomas Sz
Good product,Good price
Solid unit. Quality clamp-style wiring terminals. Works smoothly. About $10 less expensive than big box store units.
Scritto da: Mike
Works great!
I don’t usually buy Eaton switches, but this 4-way is priced much better than other popular name brands. It feels very solid, has a nice appearance and a good feel. Gets the job done just fine at almost half the price. Eaton is a reputable electric brand, so I feel confident in the quality and safety as well.
Scritto da: Douglas B.
Great price
At Home Depot and other suppliers, a Leviton 4way switch was over $35.00. This switch is just as good and a fraction of the cost. Nice and easy clamps to secure the wires too. Edit: Oct 4 2020 This switch seems to have magically turned into a 3 way. Had it connected exactly as the Leviton 4way and now it does not work. I put the slightly cracked original back in and all 3 switches work as they should.
Scritto da: LLW
good quality and value
Using to replace all the older ivory coloured toggle switches in my home. Unable to speak about their longevity but they have good snap action and very minimal arcing.
Scritto da: Robert Spence
Just what I needed at 1/2 the cost anywhere else.
As advertised. Good quality and function properly. Cost 50% less than local electrical suppliers, and most of them didn't stock these switches. Great deal.

Σχετικά προϊόντα

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array