Δύσκολα εύρεση στερέωσης 014973322229 παξιμάδια χονδρόκοκκου, 5/8-11, κομμάτι-5 5/8-11-ιντσών

Name: Δύσκολα εύρεση στερέωσης 014973322229 παξιμάδια χονδρόκοκκου, 5/8-11, κομμάτι-5 5/8-11-ιντσών
Brand: Hard-to-Find Fastener
SKU: 0014973322229
Price: 60.62 EUR
Availability: InStock

Brand:Hard-to-Find Fastener

3.6/5

€
60.62

Τύπος οδηγού: 15/16 γαλλικό κλειδί. Φινίρισμα: Ψευδάργυρος. Υλικό: Χάλυβας. Μήκος: 2-1/8 ίντσες. Διάμετρος: 5/8.

Ποσό

Προσθήκη στο καλάθι Αγορασε τωρα

EAN: 0014973322229

Κατηγορίες Βιομηχανικά & Επιστημονικά, Καρφιά, Βίδες & συνδετήρες, Παξιμάδια, Coupling Nuts,

Τύπος οδηγού: 15/16 γαλλικό κλειδί. Φινίρισμα: Ψευδάργυρος. Υλικό: Χάλυβας. Μήκος: 2-1/8 ίντσες. Διάμετρος: 5/8.

Exterior Finish	Zinc
Fastener Type	Lock
Material	Steel
Metal Type	Alloy Steel, Carbon Steel
Thread Size	5/8"-11

5 Star

4 Star

3 Star

2 Star

1 Star

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με^*

Η βαθμολογία σας

Scritto da: RES

Reviewing Coarse Coupling Nuts, 3/8-16, Piece-8. Good clean threads.

This review is for a bag of Coarse Coupling Nuts, 3/8-16, Piece-8. Worked perfectly for me. Good clean threads. Very solid load transfer. I have about 300 pounds hanging from each of these couplings, going from all-thread to an open hook. No problems whatsoever. Only used 5 so far, but all were good.

Scritto da: Adam

Usable after re-tapping the threads.

The units received had an issue with the thread quality. They quickly jammed on the bolts, and a quarter-turn with a wrench showed damage to the bolt threads. Re-tapping the nut fixed the issue, but in hindsight any cost savings were lost to the extra time and hassle required for the fix.

Scritto da: M. Johnson

Does what I need

Does the coupling

Scritto da: Amazon Customer

item perfect

used them to mount ladder rack on my truck, just what I needed

Scritto da: RoninFla

Exactly what I was looking for

Well made and the right size.

Scritto da: SMC

Longer than indicated!

I ordered 5/16-18 coupling nuts and they were made well and would work as intended, but note these were 1-3/4" long, NOT 3/4" long as indicated. My project required and would only work with the shorter couplings...so after 30 minutes cutting them down, then another 5 minutes to re-thread the cut end, all's good...now.

Scritto da: Amazon Customer

Just what the Dr. Ordered.

Seems to be good quality. Looking for something that didn't rust. Time will tell.

Scritto da: A

Functional but barely, re-tapping recommended

I just got these in and was modelling what I intended to do. I ordered 3/8 in.-16 coarse across the board expecting everything to fit. I grab the bolt and it will not engage the threads. At best I get 1/8 of a turn before it binds up like it is cross threaded. So after confirming everything looks right and my orders are right, I get other 3/8 in.-16 course threaded hardware and it all produces the same result. As a final sanity check I decided to just force it and see what happens. After really wrenching on it with pliers the threads do engage normally. There's consistent grinding and significant resistance. I am getting chips larger than when I tap holes out the open side of the nut. These are a decent deal if you have taps you can run through, otherwise I would watch out.