DROK 200085 3v to 5v Boost Converter, Slim DC 3-5v to DC 5 V 3A Power Up Module ρυθμιστή τάσης Volt Transformer Board

Brand:DROK

3.1/5

42.82

Παράμετροι: Τάση εργασίας: DC 6V-90V (η τάση εξόδου είναι 0-100 τοις εκατό της τάσης εισόδου) Ποτενσιόμετρο: Αντίσταση B10K; Γραμμή 20cm; Τρύπα 8mm Ισχύς ελέγχου: 48W-720W Ονομαστικό ρεύμα: 8A Μέγιστο ρεύμα: 15A Ρυθμιζόμενο εύρος ταχύτητας: 0%-100% Συχνότητα PWM: 16KHZ Διάσταση: 64 89 28mm Καθαρό Βάρος: 75g Σημείωση: Το τροφοδοτικό δεν πρέπει να είναι DC, είναι AC, διαφορετικά ο ελεγκτής ταχύτητας κινητήρα συνεχούς ρεύματος θα καεί. Βεβαιωθείτε ότι η σύνδεση με το τροφοδοτικό είναι σωστή, διαφορετικά ο ελεγκτής ταχύτητας θα σπάσει. Τα θετικά και τα αρνητικά του κινητήρα μπορούν να αγνοηθούν, όταν η κατεύθυνση λειτουργίας δεν συνάδει με τις προσδοκίες, μπορείτε να προσαρμόσετε τη σειρά του καλωδίου για να αλλάξετε τον προσανατολισμό. Ρυθμίστε το κουμπί του ποτενσιόμετρου, το οποίο μπορεί να αλλάξει την αναλογία κενής θέσης εξόδου του ελεγκτή, για να αλλάξετε την ταχύτητα του κινητήρα. Η συσκευασία περιλαμβάνει: 1 x Ελεγκτής ταχύτητας κινητήρα DC

Η σύνδεση εξωτερικού θετικού αρνητικού διακόπτη μπορεί να επιτύχει τη λειτουργία θετικής αναστροφής. Μπορεί να ελεγχθεί από εξωτερικό 0-5V και να χρησιμοποιηθεί σε PLC για τον απευθείας έλεγχο της ταχύτητας του κινητήρα. Ρυθμίστε το κουμπί του ποτενσιόμετρου για να αλλάξετε την έξοδο που καταλαμβάνει το ποσοστό κενών θέσεων του ελεγκτή και η ταχύτητα του κινητήρα θα αλλάξει. Προσαρμόστε τη σειρά του καλωδίου για να αλλάξετε τον προσανατολισμό. μπορεί να ελέγξει την αλλαγή της ταχύτητας του κινητήρα από 0 τοις εκατό σε 100 τοις εκατό και είναι χωρίς θόρυβο όταν ο κινητήρας είναι σε χαμηλή ταχύτητα. Με τυπικό μέγεθος (5mm*20mm) κεραμική ασφάλεια 15A γρήγορης σύντηξης και προστασία από την αντίστροφη σύνδεση ισχύος και προστασία υπέρτασης, πιο ασφαλής στη χρήση.
Country of Origin China
Is Discontinued By Manufacturer No
Item model number 200085
Manufacturer DROK
Package Dimensions 5.4 x 3.3 x 1.8 inches; 3.53 Ounces

3.1

13 Review
5 Star
55
4 Star
17
3 Star
15
2 Star
3
1 Star
11

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: WH7QQ
Works well and was easy to hook up.
Amazon, for some weird reason, on my orders shows this as an "up" converter which it absolutely IS NOT. It is a very usable PWM type speed control for DC motors. I have it working to control the DC gear motor from an old battery drill and it gets its power from a DC power supply from an old, dead laptop (18v 6A). It does my job perfectly. If you are looking for an up converter, look elsewhere.
Scritto da: GT
Works properly, no problems
What I ordered was "Motor Speed Controller, DROK DC Motor Speed Control 6V-90V 15A 1000W 16KHZ PWM Controller 6V 12V 36V 60V 90V Speed Regulator Module Board Support PLC Control " and that's exactly what I got. I installed it and it works without issue. MUCH cheaper than replacing the entire unit. A+
Scritto da: MARIUS
Easy to use but it doesn't have Forward/Backward function
I intended to use the product together with a Raspberry Pi and realized shortly that it doesn't have a built in Forward/Backward function. Everything else is good.
Scritto da: LUIS PEÑA
Excelente controlador
Es muy fácil de usar. Lo usé para controlar la velocidad de un motor reductor que acondicione a mi máquina de coser...
Scritto da: brian collinsworth
Awesome
Works great. Slowed my scavenge pump down to quiet it up.
Scritto da: John Gennero
Works well
Does exactly what it's supposed to do. Would buy again.
Scritto da: Earthly Traveler
Reliable so far.
Work as promised, no complaints.
Scritto da: Olle Gladso
Great for controlling relatively high voltage DC loads.
Perfect! I use it as a controller for an electric resistance heater in an electric vehicle.
Scritto da: Tate
Great voltage converter...
I used this to drop 18 vDC from an M18 Milwaukee power tool battery to 12 vDC output to operate a kid's electric ATV ride-on. The Milwaukee (or your own favourite tool manufacturer - yellow, green, orange, whatever) batteries are easier and quicker to charge than the OEM gel battery which is lead-acid. This allows me to adjust the output so that I don't overload the 12 vDC motors...or add a "turbo" feature for more excitement! Note: the potentiometer is a 10 k-ohm one and the circuit board needs to be under load to see the true motor output. If you test the motor voltage while not loaded, it won't show much difference from the input battery voltage. Basically, it works and works well.
Scritto da: Amazon Customer
Works Great
Using it to power my girls Power Wheels with a couple of 18V batteries and this items works perfectly for this. I've tried a couple of the other ones with a lower current rating and they burnt out after a short while. I wouldn't hesitate to buy another one of these should I need a similar converter.
Scritto da: Daniel G.
No component numbers
It seems to work with the included potentiometer. However it seems that the component numbers have been erased from the IC and all of the MOSFETs, so there is no way of telling what the circuit is. I needed to make some changes to work with a hall sensor throttle but I can't tell what the components are. I don't understand this seemingly deliberate obfuscation.
Scritto da: Marcel Bourgoin
seems to work ok
heat sinks a little small when using above 60 V @ 10 A it over heats
Scritto da: Amazon Customer
Good choice
worked asnavertized no problem setting

Σχετικά προϊόντα

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array