Curt Manufacturing 55571 Vehicle-Side Προσαρμοσμένη πλεξούδα καλωδίωσης τρέιλερ 4 ακίδων, ταιριάζει σε επιλεγμένα Nissan Murano , Μαύρο

Brand:Curt Manufacturing

3.7/5

143.00

Εάν το όχημά σας δεν είναι εξοπλισμένο με καλωδιώσεις για τη ρυμούλκηση τρέιλερ, η προσαρμοσμένη καλωδίωση CURT είναι η ιδανική λύση. Μια προσαρμοσμένη πλεξούδα καλωδίωσης -- που ονομάζεται επίσης βύσμα T -- είναι μια απλή ηλεκτρική συσκευή plug-and-play που συνδέεται στο ηλεκτρικό σύστημα του αυτοκινήτου σας και παρέχει μια τυπική, καθολική σύνδεση καλωδίωσης τρέιλερ. Αυτό γίνεται με χρήση δύο ή περισσότερων συνδετήρων συμβατών με OEM ειδικά για το όχημα για σύνδεση στο συγκρότημα του πίσω φανού, εξαλείφοντας την ανάγκη για κοπή, μάτισμα και συγκόλληση κατά την εγκατάσταση. Οι προσαρμοσμένες καλωδιώσεις είναι ειδικά σχεδιασμένες για το όχημα και, ενώ δεν είναι διαθέσιμες για όλα τα οχήματα, προσφέρουν έναν από τους ταχύτερους, ευκολότερους και ασφαλέστερους τρόπους καλωδίωσης ενός οχήματος για ρυμούλκηση. Αυτή η συγκεκριμένη πλεξούδα σύνδεσης παρέχει μια επίπεδη υποδοχή σύνδεσης 4 κατευθύνσεων και έχει σχεδιαστεί για να είναι μια προσαρμοσμένη πλεξούδα καλωδίωσης για να ταιριάζει σε ορισμένα χρόνια του Nissan Murano (για να επαληθεύσετε τη συμβατότητα του οχήματός σας, δείτε πληροφορίες εφαρμογής). Συνοδεύεται από όλα τα απαραίτητα εξαρτήματα καλωδίωσης για τη δημιουργία αξιόπιστης σύνδεσης καλωδίωσης ρυμουλκούμενου, καθώς και κάλυμμα σκόνης για να διατηρείται ο σύνδεσμος καθαρός όταν δεν χρησιμοποιείται. Έχετε στο μυαλό σας μια εικόνα του επόμενου προορισμού σας -- ίσως είναι το σκάφος που προσγειώνεται στο αγαπημένο σας σημείο ψαρέματος, ίσως είναι ένα κάμπινγκ που έχει θέα σε ένα από τα αριστουργήματα της φύσης ή ίσως είναι το επόμενο μεγάλο εργοτάξιο. Ωστόσο, η μετατροπή αυτής της εικόνας σε πραγματικότητα απαιτεί περισσότερα από μια απλή ονειροπόληση. Χρειάζεται μια σταθερή σύνδεση και τη σωστή ποσότητα ισχύος. Η προσαρμοσμένη καλωδίωση CURT είναι κατασκευασμένη με μερικές από τις πιο εξελιγμένες τεχνολογίες του κλάδου και έχει σχεδιαστεί για εύκολη εγκατάσταση, παρέχοντάς σας ηλεκτρική σύνδεση μεγάλης διάρκειας για τη ρύθμιση του κοτσαδόρου ρυμούλκησης.

ΚΑΛΥΜΜΑ ΓΙΑ ΤΗ ΣΚΟΝΗ. Για να προωθήσετε τη μακροχρόνια χρήση και την αντοχή στις καιρικές συνθήκες, αυτή η 4πολική καλωδίωση φωτισμού τρέιλερ διαθέτει κάλυμμα από καουτσούκ για τη σκόνη. Προσαρμόζεται εύκολα στην επίπεδη υποδοχή 4 κατευθύνσεων όταν δεν χρησιμοποιείται, προστατεύοντάς την από τα εξωτερικά στοιχεία. ΑΞΙΟΠΙΣΤΗ ΙΣΧΥ. Αυτή η πλεξούδα καλωδίωσης τρέιλερ 4 κατευθύνσεων είναι κατασκευασμένη με τεχνολογία επιφανειακής τοποθέτησης. Αυτός ο τύπος κυκλώματος παράγει λιγότερη θερμότητα, βέλτιστη ένταση φωτός και ανθεκτική απόδοση. ΕΙΔΙΚΟ ΟΧΗΜΑ. Αυτή η πλεξούδα καλωδίωσης μετά την αγορά, οχήματος-ρυμουλκούμενου είναι σχεδιασμένη για επιλεγμένα χρόνια του Nissan Murano. ΣΤΑΝΤΑΡ ΣΥΝΔΕΣΗ. Αυτή η plug-in καλωδίωση ρυμουλκούμενου 4 επιπέδων μπορεί να χρησιμοποιηθεί για τη σύνδεση πίσω φώτων τρέιλερ, φώτων φρένων και φλας. Η καλωδίωση φώτων τρέιλερ 4 κατευθύνσεων είναι δημοφιλής σε μια ποικιλία τρέιλερ, προσθέτοντας ευέλικτες επιλογές ρυμούλκησης για το όχημά σας. ΕΥΚΟΛΗ ΕΓΚΑΤΑΣΤΑΣΗ. Χωρίς κόψιμο! Χωρίς μάτισμα! Αυτό το κιτ πλεξούδας καλωδίωσης ρυμουλκούμενου συνδέεται στην υπάρχουσα εργοστασιακή καλωδίωση του οχήματός σας και το εξοπλίζει με μια τυπική, πίσω υποδοχή καλωδίωσης ρυμουλκούμενου 4 ακίδων για σύνδεση και ρυμούλκηση τρέιλερ.
Brand ‎Curt Manufacturing
Country of Origin ‎Mexico
Customer Reviews 4.6 4.6 out of 5 stars 181 ratings 4.6 out of 5 stars
Exterior ‎Painted
Is Discontinued By Manufacturer ‎No
Item model number ‎55571
Item Weight ‎12.8 ounces
Manufacturer ‎Curt Manufacturing
Manufacturer Part Number ‎55571
Model ‎Custom Wiring
OEM Part Number ‎55571
Product Dimensions ‎9 x 4 x 3 inches

3.7

13 Review
5 Star
78
4 Star
15
3 Star
4
2 Star
0
1 Star
3

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: Art in VT
Hooked up with no problems
Relatively easy install given the number of clips/nuts and panels that need to be removed to gain access to the wiring harness that it plugs into on each side. I didn't pay close enough attention to the details to note that it is a 4 pin connector, so does not have a connection for reverse lights (which I have on the back of my trailers hitch mounted rack). I'm hoping I can find the line to the backup lights for the needed fifth pin connection since the lights themselves are both mounted in the hatch lid. Once I find that I'll tag into it for a relay signal to turn on the trailer mounted lights with power directly from a fused line to the battery.
Scritto da: Maria
Very easy to install
It’s just as it stated , it was very easy to install
Scritto da: Amazon Customer
Perfect fit
Figment spot on
Scritto da: Wackadoo
Easy Install and Works Great!
When I first bought my 2011 Nissan Murano, I knew immediately that I needed a hitch, and really wanted a wiring harness with it as well so I could tow our pop-up camper for short/nearby camping trips. Problem was, Nissan wanted almost $600 to install a "factory" hitch and wiring harness. So, I immediately bought a "hidden hitch" for $115 and installed it with ease, but did not add the harness until recently because I didn't want to have to run a wire under the car from the back to the battery. The Curt T-Connector solves the wire-to-the-battery problem and installs with ease. I'm not exactly Johnny Fix It, so I just took my time, watched a youtube vid on how to do the install and followed along with the supplied instructions. Installation took about 1.5 hours total (again, I took my time because I didn't want to break a clip or scratch the interior or exterior of the car). Mission accomplished - everything went perfectly. I hooked up our pop-up camper today and brought it home - all lights worked perfectly, and the 10 amp fuse had no problems at all. So, for around $175, I was able to install a system that's "almost" as good as the factory version. I say "almost" because the factory wiring harness is attached to the hitch, but the Curt rests inside your spare tire compartment and hangs out the back of the car when being used. That's the only knock I have on the product, but it's something I can live with since I won't be using it all of the time. Great product, easy install, works as advertised, and saves a ton of money vs. a factory install. Highly recommend.
Scritto da: Lauren
Could not have been easier to install!
Anyone can install this wire set! Super fast delivery, high quality!
Scritto da: Steve R
As expected
Instillation instructions were a little vague and hard to understand. However, the install is very simply plug and play. No wire splicing easy install.
Scritto da: Midweste
Highly recommend this t-Connector - Exact fit and integration with OEM wiring!!
Ordered this T-Connector harness for my 03 Nissan Murano and it worked perfectly. The excellent instructions guided me through each step of the installation and were dead on accurate for my vehicle. This unit has the exact OEM Nissan connectors that snap in place tight and secure. Install time was around 20 minutes... There is also a step by step installation guide video on the Tube for those that need more visual instruction. Plugged in my trailer lights and all is good! The matching CURT 13571 Class III Receiver from Amazon is arriving tomorrow... Dealer wanted north of $500 for the parts and installation / Amazon price for both parts $175 with free 2-day Prime shipping!! NOTE: The T-Connector that is pictured shows rubber tubing with a grommet installed on the trailer wiring. This is not on the revised and updated unit I received. It is kind of overkill since the 4 prong plug is protected at the connection and comes with a weather boot. Very satisfied with my purchase
Scritto da: Ben
Easy to install
I agree with another user that it doesn't arrive as pictured. There is no grommet and tubing. However, per the instructions the connecter is supposed to be run under the tailgate or hatch when in use. That being said you don't these parts if you use it according to manufactures guidelines. I have a 2012 Nissan Murano and the installation was a breeze. It took about 15 mins for me to install and was extremely easy. The only thing that bothered me and reason for getting 4 stars in that it came with the wrong fuse. They supply a 10amp mini fuse and the vehicle uses a low profile. I went to the local parts store and purchased the correct fuse. Not a huge deal but it would have been nice to have the correct part.
Scritto da: C. Hildebrandt
Easy plug and play
I am happy with the product in general, nice that its a direct clip in unit. The instructions were good but I had to remove extra panels and do alot of "work by feel" due to no vision and short factory harness wires. Once installed and wires cleaned up everything went back together as it should and lights worked. There are full how to install video's available on Google with a quick search.
Scritto da: Amazon Customer
Very happy about the no cutting/splicing of wires
Very happy about the no cutting/splicing of wires. Everything connected very well. Would buy another kit from Curt. Took about 1.5 hrs start to finish with a few beverages in between.
Scritto da: Daniel Beattie
So easy to install
I loved how easy this was to install,,,Didn't like the price,,,but hey,,,in the long run,,,it was worth it
Scritto da: Will
Highly recommend this product
Product as described with quick and easy install.
Scritto da: Jerry Mugridge
Simple install
Vehicle specific light adapter, fit & works perfect. Instructions good but also U-Tube videos make install easy.

Σχετικά προϊόντα

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array