CURT 56190 Powered 3-to-2-Wire Splice-in Trailer Tail Light Converter, Πλεξούδα καλωδίωσης 4 ακίδων , Μαύρο

Brand:‎CURT

3.2/5

101.85

Μετατρέπει το ηλεκτρικό σύστημα του οχήματος 3 συρμάτων σε τυπική καλωδίωση τρέιλερ 2 συρμάτων Επίπεδη έξοδος 4 κατευθύνσεων συνδέει τα πίσω φώτα, τα φώτα φρένων και τα φλας Κατασκευασμένα με κύκλωμα SMT για καλύτερη απόδοση και ανθεκτικότητα Χρωματικά κωδικοποιημένα καλώδια για ευκολότερη εγκατάσταση Περιλαμβάνονται κουμπωτά για γρήγορη ασφαλής συναρμολόγηση Δεν απαιτείται φλας βαρέως τύπου Περιλαμβάνεται κάλυμμα σκόνης για να διατηρείται ο συνδετήρας καθαρός όταν δεν χρησιμοποιείται Σημειώσεις: Απαιτείται κιτ καλωδίωσης μετατροπέα με τροφοδοσία CURT #55151 ή παρόμοιο Όταν το όχημά σας δεν παρέχει εύκολα ηλεκτρική σύνδεση για τη σύνδεση του τρέιλερ σας, το CURT ηλεκτρικό μετατρέπει προσφέρουν τη λύση. Τα πίσω φώτα εργασίας στο τρέιλερ σας είναι απολύτως απαραίτητα κάθε φορά που ρυμουλκείτε και ένας μετατροπέας παρέχει έναν αποτελεσματικό τρόπο για να εξοπλίσετε σωστά το όχημά σας για ασφαλή ρυμούλκηση. Ένας ηλεκτρικός μετατροπέας CURT, όπως και οι προσαρμοσμένες καλωδιώσεις από όχημα σε ρυμουλκούμενο, παρέχει μια υποδοχή ρυμουλκούμενου στο όχημά σας συνδέοντας στο ηλεκτρικό σύστημα του οχήματος. Οι ηλεκτρικοί μετατροπείς έχουν σχεδιαστεί για να συνδέονται απευθείας στην καλωδίωση του πίσω φανού, αντί να συνδέονται σε διάφορες πρίζες, δίνοντάς τους το ψευδώνυμο μετατροπείς πίσω φωτός. Αν και απαιτεί λίγη επιπλέον εργασία σε σύγκριση με μια προσαρμοσμένη καλωδίωση, ένας μετατροπέας πίσω φώτων προσφέρει μια αξιόπιστη, μακροπρόθεσμη λύση σύνδεσης. Αυτός ο ηλεκτρικός μετατροπέας CURT έχει σχεδιαστεί για να μετατρέπει ένα σύστημα 3 καλωδίων σε σύστημα 2 συρμάτων και παρέχει μια τυπική υποδοχή επίπεδης σύνδεσης 4 κατευθύνσεων για να συνδέσετε το τρέιλερ σας. Έχει σχεδιαστεί για να ταιριάζει σε ορισμένα χρόνια του Audi Q5 (εκτός από το υβριδικό), BMW 328i xDrive sedan, BMW X5 SUV, Infiniti M37x sedan ή Mercedes SLK250 (για να επαληθεύσετε τη συμβατότητα του οχήματός σας, δείτε τον οδηγό εφαρμογής CURT στη διεύθυνση curtmfg.com). Αυτός ο μετατροπέας είναι κατασκευασμένος με κυκλώματα τεχνολογίας επιφανειακής τοποθέτησης αιχμής (SMT), με ηλεκτρικά εξαρτήματα που τοποθετούνται απευθείας στην επιφάνεια της πλακέτας αντί να εισάγονται σε μια σειρά οπών. Τα κυκλώματα SMT έχουν μεγαλύτερο κύκλο ζωής, χαμηλότερη αντίσταση, μειωμένη παραγωγή θερμότητας και είναι πιο αξιόπιστα από τα εξαρτήματα που είναι τοποθετημένα σε οπή. ΠΡΟΔΙΑΓΡΑΦΕΣ ΠΡΟΪΟΝΤΟΣ HUB_USA D25 Εγγύηση Περιορισμένης εγγύησης ενός έτους Δυσκολία εγκατάστασης Δυσκολία Τύπος εξαρτήματος 3-προς-2 Μετατροπέας πίσω φωτός καλωδίου Υλικό Κενό Βάρος αποστολής 0,570 Χρόνος εγκατάστασης Ακριβής 60 κυκλώματα στροφής και φρένων ανά φως C5. it Τύπος εξόδου 4 -Προστασία με επίπεδη κύκλωμα Ναι Τροφοδοσία με μπαταρία Ναι

ΑΝΘΕΚΤΙΚΟ ΣΤΙΣ ΚΑΙΡΕΣ. Για να βοηθήσει στην προστασία αυτού του μετατροπέα φωτός τρέιλερ από τα στοιχεία, συνοδεύεται από ένα ελαστικό κάλυμμα σκόνης για την υποδοχή καλωδίωσης 4 ακίδων, προστατεύοντάς τον από βροχή, βρωμιά, σκόνη και άλλα όταν δεν χρησιμοποιείται. ΕΤΟΙΜΟ ΓΙΑ ΕΓΚΑΤΑΣΤΑΣΗ. Αυτός ο μετατροπέας φώτων τρέιλερ είναι έτοιμος για εγκατάσταση στο όχημά σας. Περιλαμβάνει κουμπωτά για ασφαλή σύνδεση των καλωδίων και δεν απαιτεί φλας βαρέως τύπου (απαιτείται κιτ καλωδίωσης μετατροπέα CURT #55151, πωλείται χωριστά). ΣΥΡΜΑΤΑ ΜΕ ΧΡΩΜΑΤΑ ΚΩΔ. Για να γίνει η εγκατάσταση γρηγορότερη και ευκολότερη, αυτός ο μετατροπέας καλωδίωσης τρέιλερ ενώνεται στο όχημά σας χρησιμοποιώντας καλώδια με χρωματική κωδικοποίηση (κύκλωμα σήματος 7,5 αμπέρ, κύκλωμα πίσω φανού 7,5 αμπέρ). ΣΤΑΝΤΑΡ ΕΞΟΔΟΣ. Αυτός ο μετατροπέας πίσω φώτων μετατρέπει το ηλεκτρικό σύστημα του οχήματος 3 καλωδίων σε τυπική καλωδίωση τρέιλερ 2 συρμάτων και παρέχει μια τυπική επίπεδη υποδοχή 4 κατευθύνσεων για τη σύνδεση των πίσω φώτων, των φώτων φρένων και των φλας για ρυμούλκηση. ΑΞΙΟΠΙΣΤΗ ΙΣΧΥ. Αυτός ο τροφοδοτούμενος μετατροπέας πίσω φώτων 3 σε 2 καλωδίων παρέχει μια αξιόπιστη επιλογή πλεξούδας καλωδίωσης ρυμουλκούμενου, εάν δεν είναι διαθέσιμη για το όχημά σας μια προσαρμοσμένη καλωδίωση ρυμουλκούμενου CURT.
Brand ‎CURT
Country of Origin ‎USA
Customer Reviews 4.2 4.2 out of 5 stars 73 ratings 4.2 out of 5 stars
Item model number ‎56190
Item Weight ‎9.1 ounces
Manufacturer ‎Curt Manufacturing
Manufacturer Part Number ‎56190
Model ‎Taillight Converter
OEM Part Number ‎56190
Product Dimensions ‎9 x 4 x 3 inches

3.2

13 Review
5 Star
56
4 Star
24
3 Star
7
2 Star
7
1 Star
6

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: Daniel Demetre
Convert semi truck to RV connector
I bought this converter because I needed to pull my gooseneck trailer(7 pin RV style flat pin plug) with a semi tractor(standard 7 pin round semi plug). A semi tractor uses a separate circuit to operate the brake lights and the turn signals unlike trailers like RVs that are wired to be pulled by an automobile that combine them onto one circuit. Without this converter the brake lights and turn signals would do all kinds of crazy things. This takes the two isolated circuits and combines them for the trailer without affecting the semi tractor lights. I built an adapter harness to go between the semi tractor plug and the trailer plug with the Curt 56190 3 to 2 wire converter in the adapter harness. It worked very well. (obviously there is more to my adapter than just light conversion, but this is what I used for that portion) Note that this is a powered converter! There are non-powered converters available as well. I used this powered converter because of the number of lights on my trailer. It probably wasn't necessary but I wanted to be sure I had enough power to operate them all brightly. So this adapter requires a functional 12v input to power it. Without the power input(always powered when in use) it will not function at all (no lights at all). If you are wanting to pull your RV or trailer with a semi tractor, and need to adapt the lights this will work nicely for your adapter.
Scritto da: Rhick
No instructions For a 2 wire vehicle where the break & turn signals share the same wire.
Cons instructions suck for a 2 wire vehicle where the turn signal & break light signal are on the same wire. Solution= Simply don't use the break light/stop light wire on this kit, just cap it off with a electrical crimp connector & hook up the left and right turn signal wires to each side of vehicle and the park light wire. Pros once you understand the wiring it works great.
Scritto da: Jonas W.
Self explanatory
All the wires are labeled on the device itself. It’s self explanatory. If you can’t figure it out from the picture before you buy it, don’t. The instructions suck balls
Scritto da: W245
Works well but check parts
Worked well but didncome with wire taps. Also, instructions are lacking, but there are good videos online.
Scritto da: TK
Good product, wrong wire connectors for my car.
The unit itself works fine. The connectors are not good on newer cars with rear led lights because the wire is so thin the connectors don't make good contact. I used some old phone wire beans I had laying around, which have a gel in them to protect the connection. Overall I would buy it again. You will also need to buy a roll of wire (18 ga) and an 'add a fuse' to complete the job.
Scritto da: Nash O
Works perfect on e320 2005 CDI Mercedes but...
worked great but was missing the wire splicers and the fuse holder. Had to run to Lowes twice. After that it was perfect. You must watch the online video to figure out what wire go where. With extreme caution took 2 hrs to install plus lowes trips were extra.
Scritto da: joe c.
High Capacity, powered, circuit protected taillight converter
I wish Amazon/Curt would do a better job of describing these things. A chart would be nice. A photo of the front of the packaging (with the useful information) wouldn't hurt either. The heavy duty part means 7.5A each Left / Right Signal circuit. And 7.5A for the separate tails. I don't know how that is supposed to work out using a 10A max fuse. It is "powered" so hopefully won't draw much off of the existing vehicle lighting circuits. Is circuit protected (not mentioned in the description)
Scritto da: matthew benz
Great box but blade fuse connection was faulty????
The flipping fuse connector was faulty straight from the box (hence the 4 star)but everything else worked great. I recommend using the posi-tap connectors instead of the t-tabs. The posi-tap connectors are Way easier to use and an extremely great and secure connection.
Scritto da: Amazon Customer
Some of the best customer service.
Something was wrong. And they replaced it in a minute. Amazing customer service. Can't go wrong with this item
Scritto da: Harnake Bangar
Works well!
Easy to mount, universal wiring. Did the job perfectly.
Scritto da: bill lemay
Does not come with
No battery wire and fuse link included
Scritto da: Carl Cauchon
Très bon produit
Très bonne qualité facile à installer
Scritto da: curtis collins
Five Stars
works great

Σχετικά προϊόντα

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array