CURT 56016 Προσαρμοσμένη πλεξούδα καλωδίωσης τρέιλερ 4 ακίδων από πλευράς οχήματος, ταιριάζει σε επιλεγμένα Mazda 2 Hatchback, 5, CX-9, Μαύρο

Brand:CURT

3.7/5

112.96

Εάν το όχημά σας δεν είναι εξοπλισμένο με καλωδιώσεις για τη ρυμούλκηση τρέιλερ, η προσαρμοσμένη καλωδίωση CURT είναι η ιδανική λύση. Μια προσαρμοσμένη πλεξούδα καλωδίωσης -- που ονομάζεται επίσης βύσμα T -- είναι μια απλή ηλεκτρική συσκευή plug-and-play που συνδέεται στο ηλεκτρικό σύστημα του αυτοκινήτου σας και παρέχει μια τυπική, καθολική σύνδεση καλωδίωσης τρέιλερ. Αυτό γίνεται με χρήση δύο ή περισσότερων συνδετήρων συμβατών με OEM ειδικά για το όχημα για σύνδεση στο συγκρότημα του πίσω φανού, εξαλείφοντας την ανάγκη για κοπή, μάτισμα και συγκόλληση κατά την εγκατάσταση. Οι προσαρμοσμένες καλωδιώσεις είναι ειδικά σχεδιασμένες για το όχημα και, ενώ δεν είναι διαθέσιμες για όλα τα οχήματα, προσφέρουν έναν από τους ταχύτερους, ευκολότερους και ασφαλέστερους τρόπους καλωδίωσης ενός οχήματος για ρυμούλκηση. Αυτή η συγκεκριμένη πλεξούδα σύνδεσης παρέχει μια επίπεδη υποδοχή σύνδεσης 4 κατευθύνσεων και έχει σχεδιαστεί για να είναι μια προσαρμοσμένη πλεξούδα καλωδίωσης για να ταιριάζει σε ορισμένα χρόνια των Mazda 2 hatchback, Mazda 5 και Mazda CX9 (για να επαληθεύσετε τη συμβατότητα του οχήματός σας, δείτε πληροφορίες εφαρμογής). Συνοδεύεται από όλα τα απαραίτητα εξαρτήματα καλωδίωσης για τη δημιουργία αξιόπιστης σύνδεσης καλωδίωσης ρυμουλκούμενου, καθώς και κάλυμμα σκόνης για να διατηρείται ο σύνδεσμος καθαρός όταν δεν χρησιμοποιείται. Έχετε στο μυαλό σας μια εικόνα του επόμενου προορισμού σας -- ίσως είναι το σκάφος που προσγειώνεται στο αγαπημένο σας σημείο ψαρέματος, ίσως είναι ένα κάμπινγκ που έχει θέα σε ένα από τα αριστουργήματα της φύσης ή ίσως είναι το επόμενο μεγάλο εργοτάξιο. Ωστόσο, η μετατροπή αυτής της εικόνας σε πραγματικότητα απαιτεί περισσότερα από μια απλή ονειροπόληση. Χρειάζεται μια σταθερή σύνδεση και τη σωστή ποσότητα ισχύος. Η προσαρμοσμένη καλωδίωση CURT είναι κατασκευασμένη με μερικές από τις πιο εξελιγμένες τεχνολογίες του κλάδου και έχει σχεδιαστεί για εύκολη εγκατάσταση, παρέχοντάς σας ηλεκτρική σύνδεση μεγάλης διάρκειας για τη ρύθμιση του κοτσαδόρου ρυμούλκησης.

ΚΑΛΥΜΜΑ ΓΙΑ ΤΗ ΣΚΟΝΗ. Για να προωθήσετε τη μακροχρόνια χρήση και την αντοχή στις καιρικές συνθήκες, αυτή η 4πολική καλωδίωση φωτισμού τρέιλερ διαθέτει κάλυμμα από καουτσούκ για τη σκόνη. Προσαρμόζεται εύκολα στην επίπεδη υποδοχή 4 κατευθύνσεων όταν δεν χρησιμοποιείται, προστατεύοντάς την από τα εξωτερικά στοιχεία. ΑΞΙΟΠΙΣΤΗ ΙΣΧΥ. Αυτή η πλεξούδα καλωδίωσης τρέιλερ 4 κατευθύνσεων είναι κατασκευασμένη με τεχνολογία επιφανειακής τοποθέτησης. Αυτός ο τύπος κυκλώματος παράγει λιγότερη θερμότητα, βέλτιστη ένταση φωτός και ανθεκτική απόδοση. ΕΙΔΙΚΟ ΟΧΗΜΑ. Αυτή η πλεξούδα καλωδίωσης μετά την αγορά, οχήματος-ρυμουλκούμενου έχει σχεδιαστεί για επιλεγμένα χρόνια των Mazda 2 hatchback, Mazda 5 και Mazda CX 9. ΤΥΠΙΚΟΣ ΣΥΝΔΕΣΜΟΣ. Αυτή η plug-in καλωδίωση ρυμουλκούμενου 4 επιπέδων μπορεί να χρησιμοποιηθεί για τη σύνδεση πίσω φώτων τρέιλερ, φώτων φρένων και φλας. Η καλωδίωση φώτων τρέιλερ 4 κατευθύνσεων είναι δημοφιλής σε μια ποικιλία τρέιλερ, προσθέτοντας ευέλικτες επιλογές ρυμούλκησης για το όχημά σας. ΕΥΚΟΛΗ ΕΓΚΑΤΑΣΤΑΣΗ. Χωρίς κόψιμο! Χωρίς μάτισμα! Αυτό το κιτ πλεξούδας καλωδίωσης ρυμουλκούμενου συνδέεται στην υπάρχουσα εργοστασιακή καλωδίωση του οχήματός σας και το εξοπλίζει με μια τυπική, πίσω υποδοχή καλωδίωσης ρυμουλκούμενου 4 ακίδων για σύνδεση και ρυμούλκηση τρέιλερ.
Brand CURT
Brand ‎CURT
Country of Origin ‎USA
Customer Reviews 4.7 4.7 out of 5 stars 240 ratings 4.7 out of 5 stars
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 9 x 6 x 3 inches
Item model number ‎56016
Item Weight 1.77 Pounds
Item Weight ‎1.77 pounds
Manufacturer ‎Curt Manufacturing
Manufacturer Part Number ‎56016
Material Rubber
Model ‎Custom Wiring
OEM Part Number ‎56016
Product Dimensions ‎9 x 6 x 3 inches

3.7

12 Review
5 Star
86
4 Star
7
3 Star
1
2 Star
1
1 Star
6

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: Amazon Customer
Everything you need
The package included everything that we needed to install the equipment.
Scritto da: sam
Worked perfect for our 2015 CX-9
Our 2015 Mazda CX-9 had a Mazda trailer control/harness/module installed that had partially failed (right trailer blinkers no longer worked). I installed this Curt module in its place, and everything works perfectly now, for much cheaper than of we were to purchase a Mazda OEM harness.
Scritto da: GCV
Worth it..
Routing the wire from battery to the back of the vehicle maybe complicated but the rest is a breeze...wish it came with tester so that you don't have to get one..it's a. Awesome buy..
Scritto da: Amazon Customer
Comes with everything to install
I've never done this before and wired my car and about an hour. The instructions it comes with are confusing so I just looked up a U-Haul how to video. This thing comes with everything you need to install zip ties silicone and also actors for the power chords. The only thing you really need is to have a screwdriver and a pair of pliers to crimp the electrical wire but together. My trailer lights all works and I have a 17 foot vehicle and ran this out the hitch with about a foot and a half. The cord is nice and long. Works as expected. The only thing is the sticky pad it comes with two mount the inverter box with is not sticky at all you'll need to have your own double-sided tape if you want to use that way of mounting. I just use a zip-tie on both sides of the converter box to Anchor
Scritto da: Matt
Works great for 2011 CX-9
The connectors on this unit were a perfect match for my 2011 CX-9. The only slicing required was cutting into the 12V supply line for the passenger side accessory outlet, which is a much better option than running a wire all the way to the engine compartment to the battery. Took a while to install this, because of how many panels had to come off. In the CX-9, the side panels are held on by about 10 cargo hooks bolted through it. Remove these with a 10mm socket. Remove the trunk and skid plate along the bottom of the hatch. I installed the unit on the driver side, used a self tapping sheet metal screw for the ground, and ran the battery cable wire to the passenger side 12V outlet. The double sided tape is useless, either buy some 3M outdoor tape or I just tucked it into a spot where it stayed put (there is a small area stuffed with foam, I kind of jammed it partway in so it didn't bounce around.) For the 12V outlet, cut the hot wire and splice in the new cable using one of the supplied butt connectors. Make sure you pull the fuse under the hood to avoid shorting. It is listed as "RR outlet." You will need another butt connector, they give you 2, but you need 3 to use the included fuse. Do not go without the fuse, if the trailer wiring shorts out it could damage your cars electronics. I left the flat trailer connector in the area of the jack, so once I put it all back together, I just open the jack compartment and pull out the cable. This keeps it clean and dry until it is needed. Just run it out to the trailer and close the door on it, it will not damage the wire. I have used this method on 3 cars over the years (all hatchbacks) and have never had a problem.
Scritto da: J. Louie
Worked perfectly for our CX-9, but there were a few issues to note
Installed this on a Mazda CX-9 Sport FWD. The instructions were pretty lacking, but I'd already done my research on how to remove the inside panels to get access to all the necessary connectors. Instead of running the power wire all the way to the battery, power is always running to the rear 12V outlet so I tapped into that instead by soldering the short "fuse" wire in the hot wire going into the 12V. After getting everything connected and routed, I did find that my voltmeter was reporting voltage to the 4-flat leads even without the key on or the engine running (this was the not the case with the factory-installed wiring harness tested for comparison). It must be an extremely low draw, because when tested on a trailer in pitch black, there wasn't any glow from the lights until the car lights were turned on like normal. I just wanted to mention that for other folks to be aware of. Pros: Easy to install. Took about two hours with lots of double-checking and testing. Worked perfectly when hooked up to my trailer. Cons: Instructions were lacking, so I'd watch the install videos on eTrailer beforehand if want to brush up on the process. The leaking voltage caused some unnecessary heartburn as well.
Scritto da: overboostvisuals
Easy to install and provide clean factory-look
Absolutely perfect, super clean plug and play install. Worth it vs splicing into tail light harness. All wires are long enough to make it where they need to be, and on my wife’s 2012 CX-9 I was able to almost entirely hide the power cable by running it along the drivers-side under the car where there are a lot of trays that the wire can be tucked in, and the green cable to reach the passenger side easily hides too. A little extra time and you can make it look like the car came from the factory ready for towing.
Scritto da: Dennis P. Dalton
Fits well.
Easy to connect and works as advertised.
Scritto da: Geo
Great product
I have used these before. This was put in a Mazda 5 van and works perfectly! It was no more difficult or easy to install than any others.
Scritto da: P Remps
Worked perfectly!
Nice easy install. Everything fit perfect. It says to run a power cable under the car to the battery, I tapped into the power on the 12v accessory outlet in the back hatch. Made it even easer. Very happy.
Scritto da: Sarah
Fits 2012 Mazda 5. Easy to install
Easy install on my 2012 Mazda 5 GS. Everything plugs in easily. The hardest part of the install was running the wire to the battery under my carpet. Comes with everything you need to install other then basic tools.
Scritto da: Randy
Great quality. Easy instructions
Works perfectly on my 2008 Mazda CX-9. Great quality. Easy instructions. Video on Youtube is very helpful.

Σχετικά προϊόντα

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array