BOSCH T15020 20 χλστ

Name: BOSCH T15020 20 χλστ
Brand: BOSCH
SKU: 0000346182811
Price: 73.17 EUR
Availability: InStock

Brand:BOSCH

3.1/5

€
73.17

ΠΕΡΙΓΡΑΦΗ ΠΡΟΪΟΝΤΟΣ Η BOSCH προσφέρει μια πλήρη σειρά ξύλινων τρυπών για εφαρμογές βαρέως τύπου και λεπτής επεξεργασίας ξύλου. Τα εξαρτήματα διάτρησης μεντεσέδων από την BOSCH πληρούν τις προδιαγραφές μεντεσέδων ευρωπαϊκού τύπου. Αυτά τα βαρετά κομμάτια παρέχουν μέγιστη ακρίβεια και είναι ανθεκτικά στη φθορά για βελτιστοποίηση της ροής εργασίας. ΑΠΟ ΤΟΝ ΚΑΤΑΣΚΕΥΑΣΤΗ Το Bosch Power Tools and Accessories είναι ένα από τα τμήματα της Robert Bosch Tool Corporation, η οποία είναι ένας από τους μεγαλύτερους κατασκευαστές ηλεκτρικών εργαλείων και αξεσουάρ στον κόσμο. Η Bosch παρέχει μια πλήρη σειρά ηλεκτρικών εργαλείων και αξεσουάρ με καλώδιο και ασύρματα που έχουν σχεδιαστεί για να επιβιώνουν σε κάθε εργοτάξιο και να επιτρέπουν στους επαγγελματίες να αναλαμβάνουν τον έλεγχο της εργασίας τους.

Ποσό

Προσθήκη στο καλάθι Αγορασε τωρα

EAN: 0000346182811

Κατηγορίες Εργαλεία & Είδη οικιακής βελτίωσης, Εργαλεία ισχύος & χειρός, Μέρη & αξεσουάρ ηλεκτρικών εργαλείων, Ανταλλακτικά και αξεσουάρ τρυπανιών ισχύος, Τρυπάνι Bits, Διατρητικά με διάτρηση,

Απευθυνθείτε σε επαγγελματίες που αναζητούν μια σειρά από ανατροπές αριστερά και δεξιά. Δεν προορίζεται για χρήση με τσοκ τριών σιαγόνων. Στέλεχος 10mm με επίπεδη και ρυθμιζόμενη βιδωτό επάνω μέρος κλειδώματος για αυτόματες και ημιαυτόματες μηχανές διάτρησης. Σημείο κέντρου και εξωτερικές συμβουλές βαθμολογίας.

Assembled Diameter	‎0.79 Inches
Batteries Included?	‎No
Batteries Required?	‎No
Customer Reviews	4.0 4.0 out of 5 stars 11 ratings 4.0 out of 5 stars
Cutting Diameter	‎0.79 Inches
Item model number	‎T15020
Item Package Quantity	‎1
Item Weight	‎1.6 ounces
Manufacturer	‎Bosch
Material	‎Carbide
Part Number	‎T15020
Warranty Description	‎No

5 Star

4 Star

3 Star

2 Star

1 Star

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με^*

Η βαθμολογία σας

Scritto da: hallsvt

Good price, but holes are oversized

I used this Bosch boring bit to create MFT-style perforated extension wings for my table saw, with the intention of later building an MFT assembly table. The good news is that it worked fine in my Triton router (with the Amana 1/2-10mm collet adapter (https://www.amazon.com/gp/product/B000P4QHN0/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1). The bad news, as reported by some other purchasers/reviewers, is that the holes produced by this boring bit are somewhat larger than 20mm, which means that 20mm bench dogs and other MFT accessories do not fit snugly (adversely affecting the precision & squareness of the MFT table). I didn't discover this till after the all the holes had been bored in the two extension wings, and I wasn't really in the mood to scrap the 3/4" birch plywood wings and start all over. The fix? Cut strips from a roll of aluminum foil tape and wrap them around the bench dogs -- two layers does the trick, making all the dogs & clamps fit snugly in the holes bored by the Bosch bit, yet easy enough to remove as needed. I debated whether to buy the Festool boing bit (https://www.amazon.com/dp/B0017V9PFM/ref=psdc_552392_t1_B000AS327K) to make my assembly table, but it costs more than twice as much as this Bosch bit, and at least one reviewer claims holes drilled by the Festool bit are also oversized. Then, I realized "Hey, I've already adapted all my bench dogs, clamps and table protectors (using the foil tape) to fit the Bosch holes", so I might as well just keep using this Bosch bit to create the new assembly table. By the way, I used the Dominofix/Taiga Tools template to precisely drill the MFT holes in the grid pattern. You could also use the Parf guide drilling system. Just a matter of how much you want to spend.

Scritto da: Conor

Wanders

In plywood, at least, this wanders an annoying amount. Fine for use in a drill press, but hand-held in a drill it wanders all over the place. Does not cut well at router speeds, so can't use it with a plunge router.

Scritto da: Terry C.

Bosch 20mm Hinge Boring Bit

I purchased this Bosch 20 mm hinge boring bit to make my own MFT table. Honestly, I was a little apprehensive about chucking it into my plunge router in as much as it doesn't give a maximum rpm rating for the bit. Because of this, I started out with the slowest speed my EB2200 would turn and gradually moved up. It performed flawlessly, even at the highest speed. Absolutely zero vibration and using my shop made template, I plunged 60 perfectly spaced holes into my 3/4" MDO Plywood top. I couldn't be happier. In order to do this, one will need a 1/2" to 10mm collet adapter.

Scritto da: bpitchfan

Better than Festool 20mm one

Better than Festool 20mm one. Much better tolerance.Keep in mind though that you will need a shank reducer collet if used in a 1/2" shank

Scritto da: Thomas Green

One Star

Not sharp couldn't drill through a piece of plywood

Scritto da: James

Five Stars

Great tool!