BOSCH 84602MC 23/32 In. x 3/4 ίντσες. Μύτη δρομολογητή με μύτη από κόντρα πλακέ

Brand:BOSCH

3.7/5

76.53

Οι μύτες δρομολογητή με μύτη καρβιδίου της BOSCH προσφέρουν ακρίβεια και ανθεκτικότητα. Διαθέτουν κορυφαίας ποιότητας μύτες καρβιδίου μικροκόκκου που έχουν σχεδιαστεί με ειδική διαδικασία θερμικής επεξεργασίας για εξαιρετικά λεπτό φινίρισμα. Οι μύτες παρέχουν μέγιστη ευκρίνεια και συγκράτηση των άκρων. Τα πλήρως σκληρυμένα και σκληρυμένα στελέχη από χάλυβα παρέχουν απόλυτη ανθεκτικότητα. Αυτά τα κομμάτια διατηρούν την επίπονη ακρίβεια σε εκατοντάδες προφίλ για λείανση, διαμόρφωση άκρων, κοπή, διαμόρφωση επιφάνειας και ντουλάπια/ξυλουργικά σε ξύλο, πλαστικό και laminate.

Αναβαθμισμένο καρβίδιο μικροκόκκων – σχεδιασμένο για ακριβείς κοπές και για μεγάλη διάρκεια ζωής. Ενισχυμένα στελέχη – διαθέτουν στελέχη από πλήρως σκληρυμένο και σκληρυμένο χάλυβα που παρέχουν απόλυτη ανθεκτικότητα. Κατασκευασμένο για κόντρα πλακέ κανονικού μεγέθους – δημιουργεί διάμετρο κοπής που ταιριάζει με πάχος 3/4 In. κόντρα πλακέ. Σφιχτές αρμοί κόντρα πλακέ - σχεδιασμένοι με μικρότερες διαμέτρους κοπής για να ταιριάζουν με το πραγματικό πάχος του τυπικού κόντρα πλακέ. Σχεδιασμός μύτης δρομολογητή με μύτη καρβιδίου micrograin – εξασφαλίζει σταθερά ομαλά κοψίματα φινιρίσματος, με ανώτερη αντοχή στη φθορά.
Batteries Required? ‎No
Brand BOSCH
Country of Origin ‎Taiwan
Customer Reviews 4.7 4.7 out of 5 stars 78 ratings 4.7 out of 5 stars
Included Components
Item model number ‎84602MC
Item Package Quantity ‎1
Item Weight 0.03 Pounds
Item Weight ‎0.48 ounces
Manufacturer ‎Bosch
Material Carbide
Material ‎Carbide
Package Dimensions ‎4.21 x 2.2 x 1.81 inches
Part Number ‎84602MC
Thickness ‎1 Inches

3.7

10 Review
5 Star
81
4 Star
13
3 Star
0
2 Star
0
1 Star
5

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: troland
Sharp and smooth
Works as indented. great clean cut. perfect for undersized 3/4" plywood
Scritto da: Patrick Hanrahan
Wears out quickly
This router bit is supposed to cut a dado, or a rabbet to exact thickness of a 3/4" sheet of plywood. The first few passes were great, got a nice tight fit. Then gradually, but quickly, the once tight fit was to the point of impossible. Now I have to make two passes at two different widths to fit the plywood. I can only surmise that the bit is wearing out, after a reasonably short time. I'd have been better off getting a couple of those cheap ones at Wal-Mart. Very disappointed.
Scritto da: Amazon Customer
Works great
This bit works great makes perfect joints for plywood
Scritto da: Douglas Greenwood
Perfect for dadoes
Used this bit to cut dadoes for a bookshelf. Perfect fit
Scritto da: dougbenn
Good Product
It worked as advertised. I used it to cut dados in "3/4" birch plywood. I can't rate its longevity since I've cut only ten dados. The dados came out very well, with a just snug fit with no gaps. Wish I Had bought a bit like this years ago.
Scritto da: Jack Hustler
very good bit
work fine
Scritto da: Harry B Hartman
Best plywood dados
Hard to find for 23/33 plywood dados. Love it.
Scritto da: Tricky Ricky
Made making dado cuts a piece of cake
This made quick work of cutting 3/4 inch dado easy. It cut clean cuts for every dado I needed to make. It was a little more expensive than some of the other router bits listed but in my opinion worth every penny I paid.
Scritto da: Reid Taylor
Accurate sizing
I use a lot of Russian birch plywood which is 23/32" thick. This bit makes for a snug fit where a 3/4" would be too sloppy. The bit has stayed sharp with a fair amount of use so I can highly recommend it.
Scritto da: Amazon Customer
Recommend it
Cut effortlessly but the dado was slightly larger than the 3/4 inch plywood which may possibly be because I was cutting imported shop-grade birch.

Σχετικά προϊόντα

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array