BOSCH 84436M 1/2 In. x 1-9/16 Ιν. Μύτη με μύτη από καρβίδιο

Brand:BOSCH

2.3/5

148.27

ΠΕΡΙΓΡΑΦΗ ΠΡΟΪΟΝΤΟΣ Μέσα από 80 χρόνια ανάπτυξης καινοτόμων εργαλείων και αξεσουάρ για τους επαγγελματίες του σκυροδέματος, η BOSCH έχει γίνει ο αναγνωρισμένος ηγέτης στον κλάδο. Με μια στιβαρή γραμμή που μπορεί να αντιμετωπίσει τα πάντα, από τις πιο δύσκολες εργασίες διάτρησης σκυροδέματος έως την αφαίρεση υλικού, η BOSCH είναι μια εταιρεία της οποίας η κληρονομιά είναι γραμμένη με σκυρόδεμα. Εάν το έργο απαιτεί εργασία σε σκυρόδεμα, από το γυάλισμα και την αγκύρωση μέχρι την αφαίρεση υλικού, υπάρχει μόνο ένα μέρος για να στρίψετε για μια ολοκληρωμένη λύση. Εμπιστευτείτε την BOSCH να παρέχει τα επαγγελματικά εργαλεία και αξεσουάρ για να κάνετε τη δουλειά σωστά. Ιδανικό για αφαίρεση υλικού μεγάλης επιφάνειας ασβέστη, σοβά, σοβά με σκληρό φινίρισμα, ψαμμίτη και λειαντικό σκυρόδεμα. Το σκληρό δέσιμο μετάλλων αντέχει ακόμη και σε φορτία που προκαλούνται από ισχυρά λειαντικά υλικά.. Βέλτιστη χρήση-άσφαλτος, φρέσκο ​​σκυρόδεμα, ελαφρόπετρα, σκυρόδεμα διάστρωσης , πορομπετόν, σοβάς, χυτή άσφαλτος, μαλακός ασβεστόλιθος και κονίαμα σοβά. Μπορεί να χρησιμοποιηθεί σε βασάλτη, παλιό σκυρόδεμα, σωλήνες από πέτρινο σκυρόδεμα, φυσικό ασβεστόλιθο, χαλαζίτη και ψαμμίτη. ΑΠΟ ΤΟΝ ΚΑΤΑΣΚΕΥΑΣΤΗ Οι μύτες με μύτη από καρβίδιο είναι μικροκοκκίδες που χρησιμοποιούνται για περβάζια παραθύρων, ράφια ή πατώματα σκαλοπατιών

Δεν υπάρχουν διαθέσιμες μονάδες
Συνιστάται για χρήση με πίνακα δρομολογητή. Οι μύτες καρβιδίου μικροκόκκου παρέχουν ανώτερη αντοχή στη φθορά και μεγάλη διάρκεια ζωής. Η ομαλή ακτίνα άκρη απαιτεί λίγο ή καθόλου τρίψιμο πριν την εφαρμογή του φινιρίσματος. Διαμόρφωση άκρων που χρησιμοποιείται για περβάζια παραθύρων, ράφια ή πατώματα σκαλοπατιών.
Batteries Included? ‎No
Country of Origin ‎Taiwan
Customer Reviews 3.2 3.2 out of 5 stars 14 ratings 3.2 out of 5 stars
Item model number ‎84436M
Item Package Quantity ‎1
Item Weight ‎8.9 ounces
Manufacturer ‎Bosch
Material ‎Carbide
Part Number ‎84436M

2.3

10 Review
5 Star
31
4 Star
30
3 Star
0
2 Star
8
1 Star
31

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με*

Scritto da: Amazon Customer
I was disappointed to find that this bit actually has more like ...
I was disappointed to find that this bit actually has more like a 7/16 radius, because it cuts the bullnose on stair tread with a 1/16 lip on the top and bottom. I had to sand pretty deep to make that go away on some radiused stair treads I bought this for. If I were doing the project again, I would use a 1/2" radius round over bit with a bearing.
Scritto da: Elle Noel
BEWARE - this router bit is for shaping a bullnose ...
BEWARE - this router bit is for shaping a bullnose on a 1" thick tread. It is not usable for a 1-1/2" tread. The 1-9/16" dimension in the description is an irrelevant dimension from the top of the blue portion to the bottom of the blue portion, not the cutting surfaces. I gave it one star because this information is not clearly stated in the specifications and, therefore, I've had to go to the hassle of returning it.
Scritto da: Khalid almarzouqi
High quality router bits
Original and high quality router bits
Scritto da: vette77
I used this bit to create a bull-nose on a ...
I used this bit to create a bull-nose on a transitional strip for a stair landing. The cuts were smooth leaving no fuzz and no burning.
Scritto da: Threedbb
LISTING NOT ACCURATE!! I wanted a 1-1/2". ...
LISTING NOT ACCURATE!! I wanted a 1-1/2"... that's a one and one half inch, bullnose. I got a one inch bullnose (1/2" radius).
Scritto da: robert
Five Stars
good
Scritto da: Jerry T. Workman
WRONG PART NUMBERS
PART # 84436M IS NOT FOR A 1 1/2-INCH BULL NOSE THIS PART # IS FOR A 1/2-INCH BULL NOSE
Scritto da: Wayne S.
This is NOT 1-1/2". The description is wrong.
Had to send this back unfortunately. The product looked to be made very high quality. However, the listing was not accurate.
Scritto da: Sar
Incorrect Description - don’t waste your time !!
This cutter only makes a 1” bead. This will not nose a 1-1/2” piece of wood. Do not order!!!!
Scritto da: Amazon Customer
The carbide cutting capacity is only 1 inch.
The carbide cutting capacity is only 1 inch.

Σχετικά προϊόντα

Ανακαλύψτε το διεθνές μας δίκτυο

Στέλνουμε σε 28 χώρες, πάνω από 200.000 προϊόντα. Μείνετε ενημερωμένοι, εγγραφείτε στο ενημερωτικό δελτίο.

Array