BLACK+DECKER 7.0 Amp 1/2 in. Ηλεκτρικό τρυπάνι/Κιτ οδηγού (DR560) Τρυπάνι/Μόνο πρόγραμμα οδήγησης

Name: BLACK+DECKER 7.0 Amp 1/2 in. Ηλεκτρικό τρυπάνι/Κιτ οδηγού (DR560) Τρυπάνι/Μόνο πρόγραμμα οδήγησης
Brand: BLACK+DECKER
SKU: 0012301047028
Price: 134.91 EUR
Availability: InStock

Brand:BLACK+DECKER

3.6/5

€
134.91

Όταν η δουλειά είναι σκληρή και απαιτητική, μην αρκεστείτε σε τίποτα εκτός από το ηλεκτρικό τρυπάνι/οδηγό BLACK+DECKER 7 Amp 1/2 in.. Αυτό το ισχυρό τρυπάνι/οδηγός με καλώδιο είναι ιδανικό για τη διάνοιξη οπών και την οδήγηση μεγάλων συνδετήρων μέσα από μια ποικιλία υλικών, όπως ξύλο, μέταλλο και πλαστικό. Επιπλέον, είναι αρκετά συμπαγές για ελιγμούς σε στενούς χώρους και σε σκάλες. Ο μηχανισμός μεταβλητής ταχύτητας είναι πραγματικά χρήσιμος όταν πρέπει να προσαρμόσετε την ισχύ εξόδου. Αυτό το ηλεκτρικό τρυπάνι/οδηγό χειρίζεται εύκολα τις πιο δύσκολες εφαρμογές. Διαθέτει μεταλλικό τσοκ με κλειδί για ανθεκτικότητα και καλύτερη συγκράτηση των κομματιών, καθώς και λαβή με άνετη λαβή και πλευρική λαβή 360 μοιρών για επιπλέον έλεγχο κατά το τρύπημα. Επιπλέον, ένα σύστημα βούρτσας οπισθοπορείας παρέχει πλήρη ισχύ προς τα εμπρός και προς τα πίσω.

Ποσό

Προσθήκη στο καλάθι Αγορασε τωρα

EAN: 0012301047028

Κατηγορίες Εργαλεία & Είδη οικιακής βελτίωσης, Εργαλεία ισχύος & χειρός, Εργαλεία ισχύος, Τρυπάνια, Τρυπάνια για τρυπάνια,

ΠΕΡΙΛΑΜΒΑΝΕΙ – DR560 1/2 in. τρυπάνι/οδηγός, (1) κλειδί τσοκ + θήκη, (1) πλαϊνή λαβή. ΚΟΡΔΩΤΟ – Το τρυπάνι με καλώδιο προσφέρει απεριόριστο χρόνο λειτουργίας ακόμα και για τις μεγαλύτερες εργασίες. ΑΝΕΣΗ ΛΑΒΗ – Για πρόσθετη άνεση, ακόμη και κατά την παρατεταμένη χρήση. ΠΛΑΪΝΗ ΛΑΒΗ 360 ΜΟΙΡΩΝ – Παρέχει επιπλέον έλεγχο και σταθερότητα κατά τη διάτρηση. ΣΥΣΤΗΜΑ ΒΟΥΡΤΣΑΣ ΑΝΤΙΣΤΡΟΦΗΣ – Για πλήρη ισχύ τόσο προς τα εμπρός όσο και προς τα πίσω. τσοκ με πλήκτρα – Το ολομεταλλικό τσοκ παρέχει βελτιωμένη αντοχή και συγκράτηση των κομματιών. ΜΕΤΑΒΛΗΤΙΚΗ ΤΑΧΥΤΗΤΑ – Προσαρμόστε την απόδοση ισχύος έως και 900 rpm (περιστροφές ανά λεπτό) για βελτιωμένο έλεγχο κάθε εργασίας διάτρησης και οδήγησης. ΙΣΧΥΡΟΣ ΚΙΝΗΤΗΡΑΣ – Ο κινητήρας 7 Amp παρέχει την ισχύ που χρειάζεστε για να ολοκληρώσετε τη δουλειά. COMPACT – Η βελτιωμένη σχεδίαση σάς επιτρέπει να κάνετε ελιγμούς σε στενούς χώρους και δύσκολες περιοχές. ΠΟΛΥ ΧΡΗΣΗ - Ανοίξτε τρύπες και οδηγήστε μεγάλους συνδετήρες μέσα από ξύλο, μέταλλο και πλαστικό. Χωρητικότητα: 1/2 in. (χάλυβας); 1-1/2 ίντσες (ξύλο).

Amperage	7 Amps
Amperage	‎7 Amps
Batteries Included?	‎No
Batteries Required?	‎No
Brand	BLACK+DECKER
Brand	‎BLACK+DECKER
Certification	‎certified frustration-free
Color	‎Orange
Country of Origin	‎China
Customer Reviews	4.6 4.6 out of 5 stars 624 ratings 4.6 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
Included Components	‎bare-tool
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer	‎No
Item model number	‎DR560
Item Package Quantity	‎1
Item Weight	‎3 Pounds
Manufacturer	‎Black & Decker
Maximum Power	‎1800 Watts
Maximum Rotational Speed	900 RPM
Maximum Rotational Speed	‎900 RPM
Part Number	‎DR560
Power Source	Corded Electric
Power Source	‎Corded Electric
Product Dimensions	‎12 x 3.5 x 10.38 inches
Product Dimensions	‎12"L x 3.5"W x 10.38"H
Size	‎1/2"
Special Feature	‎compact
Special Features	‎compact
Speed	‎900 RPM
Style	‎Drill/Driver Only
Voltage	120 Volts
Voltage	‎120 Volts
Warranty Description	‎2 Year Warranty

5 Star

4 Star

3 Star

2 Star

1 Star

Γράψτε την κριτική σας

Το email σας δεν θα δημοσιευτεί. Όλα τα υποχρεωτικά πεδία επισημαίνονται με^*

Η βαθμολογία σας

Scritto da: Ronnie P.

Works good

Did what I needed to

Scritto da: James May

Excellent tool, best buy for the money

This is the best drill you can buy for the money. My last Black & Decker drill just now broke after 15 years. The switch broke, but the motor was just as strong as ever. To put it in perspective, I have 6 drills (counting 4 cordless), 2 of which are 1/2 inch capacity Black & Decker units purchased 15 years ago in Walmart. The other one is still working and that must be some kind of record. This newer drill does not have a hammer switch on top, but the only place I ever used that was to drill holes in concrete with masonry bits. If you do a lot of that, it probably is not the best choice. This drill is very strong and delivers a lot of torque so it isn't what you need for light duty jobs. You need a strong arm and good grip as you would for any drill built to deliver maximum power (no adjustable slip clutch) and it can twist your arm if you don't time the release or reduction in power to coincide with the end of the drive/drill cycle. I drive a lot of torx (star) head T-20 and T-25 deck screws using a magnetic bit holder and drill holes with bits up to a foot long and use a lot of spade bits for holes up to 1-1/2 inches. If you don't back off in a timely manner, the screws will sink too deep. I don't pamper my tools and I much prefer a keyed chuck like this drill has for better holding power and durability. If you can't afford more than 1 drill you will spend extra time working the chuck key while swapping bits out. It is a little noisier than some drills because of the straight cut gear reduction, but this also reduces amperage flow at low speeds and increases motor life. The redesigned gear reduction system is probably the main difference in this drill and my 2 older ones. Hopefully it will last as long as the one it replaced. The cord insulation is softer and more pliable than the old units which makes it a little easier to manipulate in tight places in cold weather. This is an excellent choice for workloads which drain batteries on a cordless drill. Even my best cordless drills will drain 2 batteries on a hard day. This drill will do the same amount of work as my best cordless drills but you have to drag an extension cord around which is physically a little harder than lifting the extra weight of the battery on a cordless. That's the trade off. I don't know of any line of tools that delivers as much bang for the buck as Black & Decker. Recommended.

Scritto da: Robert Michaelson

Very powerful and light

I have used a similar sized battery powered drill. It takes a large heavy battery. As long as you can plug it in, this drill solves all the problems with battery powered drills.

Scritto da: Blue-Collar

Different but same

This drill has incredible torque under slow RPM's. I had an old black and decker 1/2" drill made from metal that was forged in the fires of a great mountain. Over the years, it took a beating. Unfortunately, I was drilling a hole in a hard to get to piece of steel and allowed the drill to drift sideways...snapping the main shaft right in half. Apparently, the scroll that came with the drill was not prophesying when it said, "No matter what, thy RPM will be 450." I ordered this as its replacement. Yeah, well, it is not the drill of yore but it has done every job I have set for it. I do not like the variable speed trigger. Sometimes, when I am on top of the drill trying to move my large metal drill bit very slowly, I apply a bit to much pressure and speed the drill past what I intend. I have drilled lots of steel, soft wood, hard wood, aromatic wood and plastic and it did a wonderful job. The adjustable handle is a joke and feels like it is going to break off. It has slipped off several times when using the drill. I think a stud that allows you to screw a handle in on top and sides would be superior. That was what the older drill had and it spoiled me. It did take a few seconds to set up before each use but it was solid.

Scritto da: Diggy

I love this drill

I had a 7 Amp Black & Decker drill for at least a decade, abusing it, and finally burnt it up by drilling holes through railroad ties. I bought a Dewalt 8.4 amp drill to replace it, thinking it would be stronger. It wasn’t even close. Even being halfway burnt up, my old drill still was able to power through when the Dewalt locked up and started smoking. So I went ahead and ordered this one, which was very like my old one. I started drilling and the new Dewalt locked up. I switched drills with the bit still stuck in the railroad tie and this drill took off and easily finished the job. Obviously, I am returning the Dewalt. In fact, I’m going to order another one of these just in case they stop making them.

Scritto da: Froggyv

The right tool for the task at hand.

This is an excellent drill. But you need to pay attention to what you are drilling, it is not recommended for steel or concrete. I was drilling wood with an auger bit, my 1/4 inch drill motor did not have enough torque, it would bind. It was a new bit so I was sure that was not the problem. This drill drilled over 100 holes with the same bit in less than two hours. I spent more time putting wood into my work table clamp than I did drilling. The flutes on the auger could have been longer and would have made the job faster, but having the ability to reverse the direction of rotation allowed for easy chip removal and saved me from having to purchase a bit with a longer set of flutes. The price was right, it comes with a 2 year warranty and registering the warranty is fast and easy. Would I buy it again? Sure, after the warranty runs out. I have used B&D products for years, I have never had any issues with any of them.

Scritto da: Dennis Hutchinson

Appears as if it may have been used

The outer box was in good condition but the actual drill box was crushed and appeared to have been taped shut like it was used or was a display model in a brick and mortar store. Additionally, the chuck was missing meaning it's basically worthless as-is.